Immunosensor for the Measurement of Human Serum Albumin in Urine Based on the Spreeta Surface Plasmon Resonance Sensor

The application of SPR for measurement of the concentration of human serum albumin (HSA) in urine was studied using the compact integrated SPR sensing system Spreeta. HSA was immobilized via cystamine and glutaraldehyde onto the gold sensing area and a competitive assay for HSA was developed using a limited amount of the monoclonal antibody AL-01 in solution. Measurements were carried out in the flow-through mode and the interaction between immobilized HSA and antibody was observed in real time. To obtain reproducible results, different conditions of the measurement (method of immobilization of HSA, data evaluation, concentration of antibody, regeneration procedure) were tested. The calibration curve for clinically relevant concentrations of HSA in urine samples was constructed using 300-times diluted antibody in the form of ascites fluid. The measuring range was between 0.1 and 5 mg/l of HSA, the sensing surface was successfully regenerated and suitable for more than 20 assays. The developed method was tested on real samples of urine; to overcome the non-specific adsorption of urine components, the differential approach was adopted and the measured signal was corrected by subtraction of the response observed in the absence of the antibody.     

Quantitation of Purines and Pyrimidines in Human Serum by High-Performance Liquid Chromatography

Abstract

A high-performance liquid chromatography assay was developed for the purpose of examining xanthine, hypoxanthine, uridine, thymidine, allopurinol, and oxypurinol in serum of patients with advanced carcinoma treated with methorexate and 5-fluorouracil. After the addition of an internal standard, serum samples were extracted of purines and pyrimidines with trichloroacetic acid and neutralized with tert-amine. Aliquots of the extracted serum were injected onto a C18 reverse-phase column and purines and pyrimidines were eluted with a gradient of MeOH/H₂O and KH₂PO₄ solutions. Absorbance was detected with a variable-wavelength UV spectrophotometer at 254 nm and 280 nm. This assay can be readily applied to quantitate baseline and treatment-induced variations in serum purine and pyrimidine levels which may correlate with clinical response and/or toxicity in patients with cancer.     

Performance of hydrophobic interaction ligands for human membrane‐bound catechol‐O‐methyltransferase purification

Despite of membrane catechol‐O‐methyltransferase (MBCOMT, EC 2.1.1.6) physiological importance on catecholamines’ O‐methylation, no studies allowed their total isolation. Therefore, for the first time, we compare the performance of three hydrophobic adsorbents (butyl‐, epoxy‐, and octyl‐Sepharose) in purification of recombinant human COMT (hMBCOMT) from crude Brevibacillus choshinensis cell lysates to develop a sustainable chromatographic process. Hydrophobic matrices were evaluated in terms of selectivity and hMBCOMT's binding and elution conditions. Results show that hMBCOMT's adsorption was promoted on octyl and butyl at ≤375 mM NaH₂PO_4, while on epoxy higher concentrations (>850 mM) were required. Additionally, hMBCOMT's elution was promoted on epoxy, butyl, and octyl using respectively 0.1–0.5, 0.25–1, and 1% of Triton X‐100. On butyl media, a stepwise strategy using 375 and 0 mM NaH₂PO₄, followed by three elution steps at 0.25, 0.7 and 1% Triton X‐100, allowed selective hMBCOMT isolation. In conclusion, significant amounts of MBCOMT were purified with high selectivity on a single chromatography procedure, despite its elution occurs on multiple peaks. Although successful applications of hydrophobic interaction chromatography in purification of membrane proteins are uncommon, we proved that traditional hydrophobic matrices can open a promising unexplored field to fulfill specific requirements for kinetic and pharmacological trials.     

After‐Rinsing Hair Growth Promotions of Hinokitiol‐Containing Vesicles and Emulsions

Two kinds of topical dosage forms of hinokitiol (HKL), namely vesicles and oil‐in‐water (O/W) emulsions, were prepared. Behenyl trimethylammonium chloride (BTMAC) and fatty acids were used as bilayer‐forming materials of the vesicles, and oils were employed as oil phases of the emulsions. The substantivity of HKL in the preparations was evaluated in vitro using hairless mouse skins. After applying the preparations onto the skin and rinsing it, the amount of HKL left on the skin was determined using high performance liquid chromatography (HPLC). It was higher when HKL was encapsulated in cationic vesicles rather than in nonionic vehicles, emulsions. An ionic interaction between the cationic vehicle and negatively charged skin is likely to account for the high substantivity. Among the emulsion preparations, an emulsion having octyl salicylate as oil phase exhibited the highest substantivity of HKL. This is probably because that the oil is a good solvent for HKL and it is skin‐retentive. In vivo hair growth‐promotion effect of each dosage form was investigated, where the sample application onto the clipped backs of female mice (C57BL6) and the subsequent rinsing of the backs were done once a day for 30 days. Only HKL in the cationic vesicles had hair growth promotion effect, possibly due to the significant substantivity.     

Extended applications of electric cell-substrate impedance sensing for assessment of the structure-function of α2β1 integrin

Electric cell-substrate impedance sensing (ECIS) was applied to assess the structure-function of α2β1 integrin, receptor for collagen and laminin. On collagen-coated gold electrodes, expression of this integrin on human rhabdomyosarcoma (RD) cells (RDX2C2) yielded a five-fold increase in resistance when compared with mock transfected RD (RDpF) cells (34.5±5.2 versus 6.5±0.8 Ω/cell). An intermediate level of 16±2 Ω/cell was measured upon expression of an α2β1 mutant that lacked the α2 cytoplasmic domain (RDX2CO). On laminin, the resistance measured for RDX2C2 cells was also higher but only twice that of RDpF cells at 71±4 and 37±4 Ω/cell, respectively. In comparison, RDX2CO cells (38±4 Ω/cell), exhibiting no enhanced adhesive function, yielded a similar result to that of RDpF cells. On fibronectin, RDX2C2 and RDpF cells, exhibiting comparable levels of adhesion, were similar in resistance measurements at 85±5and 89±7 Ω/cell, respectively. It has been shown that deletion of α2 cytoplasmic domain results in dysregulated recruitment of the α2β1 mutant to focal adhesion complexes that mediate binding of fibronectin. RDX2CO cells on fibronectin, exhibiting reduced adhesive function, was associated with noticeably lower resistance (60±4 Ω/cell). Monitoring electroporation of the RD plasma membrane also indirectly validated cell attachment as reflected by the resistance measured. Results from this study demonstrated the potential of ECIS for study of the structure-function of βl integrin adhesion receptors.     

Comparison of two methods for the extraction of fat from human milk

We compared two methods for the extraction of fat from human milk. Pure fat extraction techniques are necessary for qualitative and quantitative analysis of milk fat, of which triglycerides account for more than 98%. Method I was a conventional liquid-liquid system for the fat extraction while method II was a faster approach using a haematocrit technique. No significant differences were observed between both methods neither in the fat content determined gravimetrically, nor in qualitative and quantitative analysis of triglycerides by high-performance liquid chromatography (HPLC) with evaporative light-scattering detection (ELSD). We conclude that method II offers substantial advantages over the conventional method (method I). The former requires less reagents and material and is simpler and less time-consuming (approximately 30 min instead of 90 min). Therefore, a new method will make it possible to extract fat of more human milk in the same time.     

Thermal characterization of hair using TG-MS combined thermoanalytical technique

Four amino acids and four different hair samples were studied in order to get information about the decomposition of human hair, using combined (TG-MS) and DSC techniques. The thermal stability of the investigated amino acid samples was different. Since they contain identical functional groups (-NH₂, -COOH) some common mass/charge units were identified. However, due to their different chemical composition remarkable differences have also been obtained. The results of the investigation of the amino acids were helpful to study the thermal fragmentation of the hair samples. In our experiments, the effect of the heating rates was also studied. This revised version was published online in July 2006 with corrections to the Cover Date.     

Application of laser ablation–inductively coupled plasma-mass spectrometry (LA–ICP–MS) to investigate trace metal spatial distributions in human tooth enamel and dentine growth layers and pulp

Human tooth enamel provides a nearly permanent and chronological record of an individuals nutritional status and anthropogenic trace metal exposure during development; it might thus provide an excellent bio archive. We investigated the micro-spatial distribution of trace metals (Cu, Fe, Mg, Sr, Pb, and Zn) in 196×339 m² raster pattern areas (6.6×10⁴ m²) in a deciduous tooth using laser ablation-inductively coupled plasma-mass spectrometry (LA–ICP–MS). Ablated areas include prenatal and postnatal enamel, the neonatal line, the dentine–enamel junction (DEJ), dentine, and the dentine–pulp junction. Topographic variations in the surface elemental distribution of lead, zinc, strontium, and iron intensities in a deciduous tooth revealed heterogeneous distribution within and among regions. ⁴³Ca normalized elemental intensities showed the following order: Sr>Mg>>Zn>Pb>Fe>Cu. Elevated zinc and lead levels were present in the dental pulp region and at the neonatal line. This study demonstrates the ability of LA–ICP–MS to provide unique elemental distribution information in micro spatial areas of dental hard tissues. Elemental distribution plots could be useful in decoding nutrition and pollution information embedded in their bio apatite structure.Presented in part at the 2002 Winter Conference on Plasma Spectrochemistry, Scottsdale, AZ, January 6–12, 2002. The poster was selected as an outstanding poster presentation.     

Determination of human IgG by solid-substrate room-temperature phosphorescence immunoassay based on an antibody labeled with nanoparticles containing rhodamine 6G luminescent molecules

Luminescent 50-nm silicon dioxide nanoparticles containing both types of rhodamine 6G (R; particles denoted R-SiO₂) were synthesized by the sol–gel method. In the presence of Pb(Ac)₂ as a heavy atom perturber the particle can emit the intense and stable room-temperature phosphorescence (RTP) signal of R on a polyamide membrane, with _ex^max/_em^max=470/635 nm for R. Our research indicates that the specific immune reaction between goat-anti-human IgG antibody labeled with R-SiO₂ and human IgG can be carried out quantitatively on a polyamide membrane, and the phosphorescence intensity was enhanced after the immunoreaction. Thus a new method for solid-substrate room-temperature phosphorescence immunoassay (SS-RTP-IA) for determination of human IgG was established on the basis of antibody labeled with the nanoparticles containing binary luminescent molecules. The linear range of this method is 0.0624–20.0 pg spot^–1 of human IgG (corresponding to a concentration range of 0.156–50.0 ng mL^–1, sample volume 0.40 L spot^–1). The regression equations of the working curves are I_p=71.27+7.208m_IgG (pg spot^–1) (r=0.9996). Detection limits calculated as 3S_b/k are 0.022 pg spot^–1. Compared with the same IA using fluorescein isothiocyanate (FITC) as the marker the new method was more sensitive and had a wider linear range. After elevenfold replicate measurement RSD are 4.5 and 3.6% for samples containing 0.156 and 50.0 ng mL^–1 IgG, respectively. This method is sensitive, accurate, and of high precision.     

Chemical modifiers in arsenic determination in biological materials by tungsten coil electrothermal atomic absorption spectrometry

Palladium, iridium, and rhodium are evaluated as possible chemical modifiers in the determination of As in digest solutions of biological materials (human hair and clam) by tungsten coil electrothermal atomic absorption spectrophotometry (TCA-AAS). The modifier in solution was applied onto the coil and thermally pre-reduced; the pre-reduction conditions, the amount of modifier, and the thermal program were optimized. Palladium was not satisfactory, whereas Ir and Rh were effective modifiers and rendered better relative sensitivity for As by a factor of 1.4 and 1.9, respectively compared to the case without modifier. Upon optimization of thermal conditions for As in pre-reduced Ir (2.0 µg) and Rh (2.0 µg) modifiers and in the digest solutions of the study matrices, Rh (2.0 µg) was more effective modifier and was selected as such. The mean within-day repeatability was 2.8% in consecutive measurements (25–100 µg L^–1) (3 cycles, each of n=6) and confirmed good short-term stability of the absorbance measurements. The mean reproducibility was 4.4% (n=20 in a 3-day period) and the detection limit (3 _blank/slope) was 29 pg (n=15). The useful coil lifetime in Rh modifier was extended to 300–400 firings. Validation was by determination of As in the certified reference material (CRM) of Oyster tissue solution with a percentage relative error (E _rel%) of 2% and percentage relative standard deviation (RSD%) of 3% (n=4), and by analytical recovery of As spiked in CRM of human hair [94±8% (n=4)]. The methodology is simple, fast (sample readout frequency 21 h^–1), reliable, of low cost, and was applied to the determination of As in hair samples of exposed and unexposed workers.