KINETICS AND MECHANISM OF PHASE TRANSFER CATALYZED FREE RADICAL POLYMERIZATION OF METHYL ACRYLATE

The kinetics of free radical polymerization of methylacrylate (MA) was investigated using benzyltributylammonium chloride (BTBAC) as phase transfer catalyst and potassium peroxydisulfate as initiator at aconstant temperature, 60°C, in an inert atmosphere under unstirred condition. The effect of concentrations of the monomer, initiator and the catalyst on polymerization was discussed and a mechanism of polymerization has been proposed. The order with respect to the monomer, initiator, and phase transfer catalyst was found to be 2, 0.5, and 0.5, respectively.     

Oxidation of Ascorbate by Ni(III) Complexes with Tetraaza-macrocyclic Ligands in Neutral Aqueous Solutions. A Pulse-Radiolysis Study

Abstract

The mechanisms and kinetics of oxidation of ascorbate, AH^?, by Ni(III)Lⁱ _aq and by LⁱNi(III) (HPO₄)₂ ^? complexes (L¹ = meso-(5,12)-7,7,14,14-hexamethyl-1,4,8,11-tetraazacyclotetradecane; L² = 1,8-dimethyl-1,3,6,8,10,13-hexaazacyclotetradecane) in neutral aqueous solutions have been investigated.

The oxidation of ascorbate by the LⁱNi(III) (HPO₄)₂ ^? and Ni(III)L¹ _aq proceeds via two consecutive reactions well separated in time. The products of the first reaction are the A^.? radical anion and the corresponding Ni(II) complex. The oxidations by the LⁱNi(III)(HPO₄)₂ ^? complexes proceed via the outer sphere mechanism, whereas the detailed mechanism of reaction of Ni(III)L¹ _aq cannot be determined. The rate of reaction decreases with the increase in the concentration of phosphate, thus indicating that LⁱNi(III)(HPO₄)(H₂O)⁺ and LⁱNi(III)OH²⁺ are stronger oxidizing agents than LⁱNi(III)(HPO₄)^? ₂.

The oxidation of ascorbate by Ni(III)L² _aq proceeds via three consecutive reactions which are well separated in time. Thus the results clearly point out that this process occurs via the inner sphere mechanism. The first transient observed is tentatively identified as L²(H₂O)Ni(II)(A^.?)²⁺, i.e., an unexpected complex of the ascorbate anion radical. Also in this process the last transient observed is the A^.? anion radical. The stabilization of the ascorbyl radical in a transient complex might be of biological significance.     

Optimization of mobile phase for the determination of Esomeprazole and related compounds and investigation of stress degradation by LC–MS

In this study, the objective was to investigate the degradation behavior of Esomeprazole under different recommended stress conditions according to International Conference on Harmonization of Technical Requirements for Registration of Pharmaceuticals for Human Use [1] by HPLC. Our research showed that the effect of mobile phase species on separation was significant for the determination of Esomeprazole and its related compounds. Successful separation of the drug from its related impurities and degradation products formed under different stress conditions was achieved using ammonium acetate buffer/ACN by a gradient elution. Compared with phosphate buffer/ACN, ammonium acetate buffer/ACN under same pH and gradient showed a great improvement in resolution due to the change of elution order. The drug was subjected to stress conditions including acidic, alkaline, oxidative, photolytic, and thermal conditions. Extensive degradation occurred in acidic and oxidative conditions, while mild degradation was observed in alkaline and photolytic conditions. Besides, it turned out the drug was extremely stable under thermal condition. The stability‐indicating LC–UV method was validated with respect to linearity, precision, accuracy, specificity, and robustness. The LC–MS method was also adopted for the characterization of degradation products. Based on the m/z values and fragmentation patterns, the degradation pathway of the drug has been proposed.     

Thermal degradation chemistry of poly(ethylene naphthalate) – A study by thermal volatilisation analysis

Although the fundamental degradation chemistry of poly(ethylene naphthalate), PEN, is thought to be similar to that of poly(ethylene terephthalate), PET, there is very little evidence in the literature to support this. This paper presents data on the thermal degradation of PEN, in comparison to PET, with particular reference to evolved gas analysis undertaken by thermal volatilisation analysis (TVA). Our thermal degradation studies highlight strong similarities in the degradation behaviour of PET and PEN, despite some evidence of increased thermal stability of PEN in comparison to PET. Identical primary and secondary thermal degradation mechanisms are proposed for PET and PEN, with radical degradation processes thought to dominate at high temperature.     

Study of Spontaneous Imbibition of Water by Oil-Wet Sandstone Cores Using Different Surfactants

The mechanism of spontaneous imbibition of water by sandstone cores and the relationship between reservoir wettability and imbibition recovery were studied by investigating factors influencing the spontaneous imbibition of different surfactants by oil-wet sandstone cores. Ultimate oil recovery of cores using the cationic surfactant CTAB was higher than that of the cores using the nonionic surfactant TX-100 and the anionic surfactant POE (1) at the same concentration. For CTAB and TX-100, the ultimate oil recovery by spontaneous imbibition increased with increase in surfactant concentration. In regard to imbibition recovery, TX-100 and POE(1) at high temperatures were superior to those at low temperatures. Ultimate oil recovery of the high-permeability core was higher than that of the low-permeability core at room temperature. According to changes in the driving force during the imbibition process, the imbibition curve could be divided into three regions: (1) mainly capillary force, (2) both capillary and gravity forces, and (3) mainly gravity force. The stronger the hydrophilicity of the rock surface, the higher the spontaneous imbibition recovery.     

Superheating in linear polymers studied by ultrafast nanocalorimetry

To study phase transition kinetics on submillisecond time scale a sensitive ultrafast nanocalorimeter was constructed. Controlled ultrafast cooling, as well as heating, up to 10⁶K/s was attained. The method was applied for the measurements of the superheating phenomenon in a set of linear polymers: iPS, PBT, PET, and iPP. A power law relation between the superheating and the heating rate holds in the heating rate range 10^-2-10⁴K/s. A limiting superheating of about 10% of the melting temperature was observed at rates above 10⁴-10⁵K/s. This limit depends on annealing conditions before sample melting. The observed superheating limit, as well as the power law, can be accounted for the internal stresses near the crystalline amorphous interface in semicrystalline polymers induced by heating, which are related to the thermal expansion gradients inherent in a semicrystalline material.     

机构综合的新型同伦算法研究

机构学问题的数学模型常可化为多元非线性方程组,一般求解多元非线性方程组需要初始值,而初始值的选择是相当困难的,同伦方法不需初始值就能求出全部解,为求解决这一问题提供了可行的方法,但需要编写专用的程序.通过构造新型同伦函数并结合Maple高级程序设计语言的通用工具箱,提出了同伦算法的原理与实现方法.运用该算法编写了MAPLE程序对3-RPR平面并联机构综合问题进行了研究,求出了全部解,为实际机构的设计提供了多种选择方案,为同伦方法提供了简便的实现方法.     

一种并联机构结构误差识别与修正的新算法

为了提高并联机床的运动精度,针对简化误差源模型（含42个误差量）,基于并联机构位置正解的快速算法提出了一种结构误差识别的新算法．首先按理论并联机构设计参数,将一球杆仪的两个球铰分别固定在保持平行的动、静平台上,令球杆仪在动平台上的球铰中心相对于静平台上的球铰中心做球面螺旋线运动．然后在此前提下根据球杆仪球杆理论计算长度与实际长度之差构造m维矢量空间,依次让每一个待识别的结构参数有一个单位增量,重点修正与实测误差相关程度最高的结构参数．并通过从测量误差向量中分离出主修正向量后的残余误差向量方法提高修正效率．经过若干轮修正,直到使修正后球杆理论计算长度与实际长度基本一致,即可认为各项误差已修正完毕．该算法只需测量球杆的长度值,大大减少了测量工作量及由此而引入的误差源．     

A comparison of the surface nanostructure from two different types of gram-negative cells: Escherichia coli and Rhodobacter sphaeroides

Bacteria have been studied using different microscopy methods for many years. Recently, the developments of high-speed atomic force microscopy have opened the doors to study bacteria in new ways due to the fact that it uses much less force on the sample while imaging. This makes the high-speed atomic force microscope an indispensable technique for imaging the surface of living bacterial cells because it allows for the high-resolution visualization of surface proteins in their natural condition without disrupting the cell or the activity of the proteins. Previous work examining living cells of Magnetospirillum magneticum AMB-1 demonstrated that the surface of these bacteria was covered with a net-like structure that is mainly composed of porin molecules. However, it was unclear whether or not this feature was unique to other living bacteria. In this study we used the high-speed atomic force microscope to examine the surface of living cells of Escherichia coli and Rhodobacter sphaeroides to compare their structure with that of M. magneticum. Our research clearly demonstrated that both of these types of cells have an outer surface that is covered in a network of nanometer-sized holes similar to M. magneticum. The diameter of the holes was 8.0 ± 1.5 nm for E. coli and 6.6 ± 1.1 nm for R. sphaeroides. The results in this paper confirm that this type of outer surface structure exists in other types of bacteria and it is not unique to Magnetospirillum.     

基于特征值分析的正癸烷骨架和总包简化机理

使用基于特征值分析的骨架简化方法对由118 个组分和527 个反应构成的正癸烷详细机理进行了简化,获得了一个由70 个组分、327 个基元反应组成的骨架机理; 采用基于特征值分析的计算奇异摄动(CSP)简化方法对骨架机理进行进一步简化,得到一个38 组分、34 步的总包简化机理. 通过对简化机理、骨架机理和详细机理的对比发现,简化机理和骨架机理能够很好地再现详细机理的特性,并能够描述正癸烷的主要燃烧特性,为进一步实现耦合化学反应动力学与流体力学的工程计算,提高计算效率提供了可用的燃烧模型.