Synthesis of Some Oil Spill Dispersants Based on Sorbitol Esters and Their Capability to Disperse Crude Oil on Seawater to Alleviate Its Accumulation and Environmental Impact

In this respect mono‐, di‐, and tri‐ sorbitol oleate esters [SMO, SDO, and STO] were prepared and then ethoxylated using ethylene oxide to obtain six sorbitol esters at different ethylene oxide content (e.o=5, 12, 15, 20, 35, and 45). They were tested as oil spill dispersants individually and in blends. From the obtained data, it was found that the blends are more effective than the corresponding individual surfactants. The maximum dispersion capability for the prepared surfactants was obtained at HLB range from 9 to 11 for the both individual surfactants and blends. The increase of total carbon number in the surfactant alkyl group leads to increase dispersion capability of the dispersant. The wide range of ethylene oxide content was used, but the maximum dispersion efficiency was obtained at ethylene oxide=20 in E(20)STO. Meanwhile, the dispersion capability increases when the interfacial tension decreases.     

Determination of Anionic Surfactants in Water

The use of ternary complexes in the determination of anionic surfactants has been investigated and an analytical method using linear alkyl sulfonates as a test substance has been developed. The method involves the formation of the chloroform-extractable bisphenanthroline Cu(II)-linear alkyl sulfonate (LAS) complex and the subsequent equilibration of the extract with erythrosine to form the extractable bisphenanthroline Cu(II)-erythrosine complex. In the equilibration step erythrosine displaces LAS quantitatively, allowing the determination of the LAS originally present by measuring the absorbance of the extracted bisphenanthroline-Cu(II)-erythrosine complex. Results are reported of studies made to determine the optimum analytical conditions, the sensitivity, and the precision for the method described.     

囊泡状二氧化硅的合成及油气吸附性能

以正硅酸四甲酯(TMOS)为硅源,P123(EO20PO70EO20)为表面活性剂,在p H=6的磷酸缓冲体系中制备了囊泡状二氧化硅材料.利用乙醇萃取脱除模板剂P123,电镜观测结果表明所得二氧化硅具有大孔囊泡结构,N2吸附结果表明其具有高比表面积和大孔容.通过Boehm滴定法确定了硅羟基数量与吸水率呈正相关.用囊泡状二氧化硅材料与商业化活性炭(AC)和硅胶(SG)对水蒸气、正己烷和油气进行静态吸附.在自建的动态正己烷吸附装置上用对囊泡状二氧化硅材料和商业化AC和SG对正己烷进行动态吸附.吸附结果表明,囊泡状二氧化硅材料的静/动态吸附容量和稳定性都远高于商业化活性炭和硅胶.     

一种可用于光降解的纳米氧化锌油水分离网

通过低温水热法在钢丝网上生长六棱柱形的氧化锌纳米柱.包覆了氧化锌纳米柱的钢丝网具有水下超疏油的特殊浸润性,并可用于油水分离.滤网在室温常压下可对含有汽油、柴油和原油等油水混合物进行高效快速分离,分离效率可达98%以上.材料可以承受1.4 kPa的油层压力且可反复使用.由于氧化锌的光响应性强,滤网可快速降解水中的亚甲基蓝,2 h的降解率可达80%.包覆了氧化锌纳米柱的钢丝网具备同时进行油水分离和降解环境中污染物的能力,是一种新型多功能水处理材料.     

气驱油油气混相过程的界面传质特性及其分子机制

油气混相过程的界面传质特性对气驱提高原油采收率技术非常重要。本文针对吉林某油田的实际油组分,采用分子动力学模拟研究了气驱油过程,分析了不同气体和驱替压力下油气两相的状态变化以及界面特性,获得不同驱替气体的最小混相压力(MMP)。结果表明,随着驱替气体压力的升高,气相的密度逐渐增大,油相膨胀密度降低,气相与油相的混合程度增强,油气两相界面厚度增加,界面张力随之减小。同时发现,驱替相中二氧化碳浓度越高,在同等气体压力下,油气界面更厚,油气混合程度更高。纯CO₂驱油得到的MMP远远小于纯N₂驱油,当这两种气体摩尔比为1 : 1混合时MMP介于两种纯气体之间,说明要达到同样的驱油效果二氧化碳需要的压力更小。最后,本文从分子微观作用力角度解释了驱替气体不同时影响油气混相程度的机制,通过分子平均作用势曲线发现油相分子对CO₂的吸引力要大于N₂分子,因此CO₂分子更容易与油相混合,驱替效果更明显。     

Investigating the generation of ferrous sulfide nanoparticles in the produced fluid after acidizing oil wells and its influence on emulsifying stability between oil and water

Studies show that after acidizing operation of oil wells using the alkali/surfactant/polymer (ASP) flooding technology, the produced fluid is emulsified. Since the produced emulsion is stable, it affects the oil–water separation performance. In order to analyze the generation of stable emulsion in the produced fluid after acidizing an oil well, innovative separation experiments were carried out on real oil wells. During the experiments, solid particles in the middle layer of the emulsifying system in the produced fluid after acidizing ASP flooding were extracted and characterized. The generation of the stable emulsifying system in the produced fluid was studied through stability experiments and molecular dynamics simulations. The results showed that the synergistic effect of ferrous sulfide nanoparticles and surfactants was the fundamental reason for the strong emulsifying stability of the produced liquid after acidizing of the ternary composite system. The generation of ferrous sulfide solid particles mainly included two steps. First, sulfate reducing bacteria in injected water by ASP flooding reacted with sulfate in formation water to form hydrogen sulfide. Then, the hydrogen sulfide reacted with iron metal in oil wells and casing of wellbore to form ferrous sulfide particles. It was found that surfactants are adsorbed on the surface of ferrous sulfide nanoparticles. Subsequently, the control ability of surfactant on oil and water phases in the liquid film was enhanced. The performed analyses demonstrate that the adsorption of solid particles to the oil phase was enhanced, while the free motion of molecules in the oil phase at the liquid film position was weakened. The strength of the interfacial film between oil and water was further increased by the synergistic effect of ferrous sulfide nanoparticles and surfactant. The present study is expected to provide a guideline for a better understanding of the efficient treatment of produced fluids in ASP flooding.     

基于电源电流和输出电压的模拟电路故障模型研究

基于模拟电路电源电流和输出电压的协同分析,研究了复数域的故障建模方法,提出了一种2D故障模型的数学表达式,该模型为复平面上的一簇圆轨迹。为了扩大故障轨迹之间的距离,在相同测量精度和元件容差条件下提高故障检测率和隔离率,进一步提出了3D复数空间的优化故障模型。两种故障模型都极大简化了测点选择算法和模拟故障状态仿真的复杂度,理论上对模拟电路单故障的覆盖率为100%。基于滤波器电路的实验仿真结果验证了两种故障模型的有效性。     

纳米金刚石掺混纳米氧化锌的场发射特性

利用水热法制备了菊花状的氧化锌纳米棒,并进行表征,将纳米氧化锌掺入纳米金刚石中配制成电泳液,超声分散后电泳沉积到钛衬底上,再经热处理后进行场发射特性的测试.结果表明:未掺混的金刚石阴极样品的开启电场为7.3V/μm,在20V/μm的电场下,场发射电流密度为81μA/cm2;掺混后阴极样品的场发射开启电场降低到4.7~6.0V/μm,在20V/μm电场下,场发射电流密度提高到140~158μA/cm2.原因是纳米ZnO掺入后,增强了涂层的电子输运能力、增加了有效发射体数目,提高了场增强因子β,而金刚石保证了热处理后涂层与衬底的良好键合,形成了欧姆接触,降低了场发射电流的热效应.场发射电流的稳定性随掺混ZnO量的增加而下降,要兼顾场发射电流密度及其稳定性,适量掺入ZnO可有效提高纳米金刚石的场发射性能.     

Effect of gate engineering in JLSRG MOSFET to suppress SCEs: An analytical study

In this work, an analytical model of gate-engineered junctionless surrounding gate MOSFET (JLSRG) has been proposed to uncover its potential benefit to suppress short-channel effects (SCEs). Analytical modelling of centre potential for gate-engineered JLSRG devices has been developed using parabolic approximation method. From the developed centre potential, the parameters like threshold voltage, surface potential, Electric Field, Drain-induced Barrier Lowering (DIBL) and subthershold swing are determined. A nice agreement between the results obtained from the model and TCAD simulation demonstrates the validity and correctness of the model. A comparative study of the efficacy to suppress SCEs for Dual-Material (DM) and Single-Material (SM) junctionless surrounding gate MOSFET of the same dimensions has also been carried out. Result indicates that TM-JLSRG devices offer a noticeable enhancement in the efficacy to suppress SCEs by as compared to SM-JLSRG and DM-JLSRG device structures. The effect of different length ratios of three channel regions related to three different gate materials of TM-JLSRG structure on the SCEs have also been discussed. As a result, we demonstrate that TM-JLSRG device can be considered as a competitive contender to the deep-submicron mainstream MOSFETs for low-power VLSI applications.     

A scheme for a topological insulator field effect transistor

We propose a scheme for a topological insulator field effect transistor. The idea is based on the gate voltage control of the Dirac fermions in a ferromagnetic topological insulator channel with perpendicular magnetization connecting to two metallic topological insulator leads. Our theoretical analysis shows that the proposed device displays a switching effect with high on/off current ratio and a negative differential conductance with a good peak to valley ratio.