Preparation of high performance composites based on aluminum nitride/poly(ether-ether-ketone) and their properties

Novel high performance aluminum nitride (AlN)/poly(ether-ether-ketone) (PEEK) composites containing 0-50 wt.% fractions of AlN were prepared by solution blending method followed by hot pressing to evaluate their density, melting temperature, crystallization, thermal stability, morphological behavior and Vickers hardness by using different characterization techniques. Differential scanning calorimetry results indicated that the AlN particles are very effective nucleating agent, which results in increase in melting point, hot crystallization temperature and crystallinity of composites as the AlN content increases. Thermogravimetric analysis showed enhanced thermal stability of the composites with respect to PEEK. Density and X-ray diffraction techniques showed that crystallinity of the composites increases as the wt.% of AlN content increases in polymer matrix. Scanning electron microscopy revealed that AlN particles were well dispersed with no porosity in composites. Vickers hardness of the samples increased from 24 kg/mm² for the pure PEEK to 35 kg/mm² for AlN/PEEK composites.     

Pressure-induced variation of structural,elastic, vibrational,electronic, thermodynamic properties and hardness of Ruthenium Carbides

Three of the five structures obtained from the evolutionary algorithm based structure search of Ruthenium Carbide systems in the stoichiometries RuC, Ru₂C and Ru₃C are relaxed at different pressures in the range 0–200 GPa and the pressure-induced variation of their structural, elastic, dynamical, electronic and thermodynamic properties as well as hardness is investigated in detail. No structural transition is present for these systems in this pressure range. RuC–Zinc blende is mechanically and dynamically unstable close to 100 GPa. RuC-Rhombohedral and Ru₃C-Hexagonal retain mechanical and dynamical stability up to 200 GPa. For all three systems the electronic bands and density of states spread out with pressure and the band gap increases with pressure for the semiconducting RuC–Zinc blende. From the computed IR spectrum of RuC–Zinc blende at 50 GPa it is noted that the IR frequency increases with pressure. Using a semi-empirical model for hardness it is estimated that hardness of all three systems consistently increases with pressure. The hardness of RuC–Zinc blende increases towards the superhard regime up to the limiting pressure of its mechanical stability while that of RuC-Rhombohedral becomes 30 GPa at the pressure of 150 GPa.     

Study of electrical and dielectric properties of styrene-acrylonitrile/graphite sheets composites

This paper reports the structural, electrical, dielectric and mechanical properties of the Styrene-acrylonitrile (SAN)/graphite sheets (GS) composites. The composites were prepared by in situ polymerization. The variation of electrical conductivity, dielectric constant and ac conductivity as a function of volume fraction of GS was found to follow the power law model. The dielectric constant and dissipation factor of SAN/GS composites increased significantly near the percolation. The frequency dependence of dielectric constant, dissipation factor and ac conductivity was also analyzed. Nearly ohmic behavior of current density with electric field was observed above the percolation threshold. The composite was found to possess the hardness of pure polymer at the threshold value of GS.     

Chelate titrations of Ca and Mg using microfluidic paper-based analytical devices

We developed microfluidic paper-based analytical devices (μPADs) for the chelate titrations of Ca²⁺ and Mg²⁺ in natural water. The μPAD consisted of ten reaction zones and ten detection zones connected through narrow channels to a sample zone located at the center. Buffer solutions with a pH of 10 or 13 were applied to all surfaces of the channels and zones. Different amounts of ethylenediaminetetraacetic acid (EDTA) were added to the reaction zones and a consistent amount of a metal indicator (Eriochrome Black T or Calcon) was added to the detection zones. The total concentrations of Ca²⁺ and Mg²⁺ (total hardness) in the water were measured using a μPAD containing a buffer solution with a pH of 10, whereas only Ca²⁺ was titrated using a μPAD prepared with a potassium hydroxide solution with a pH of 13. The μPADs permitted the determination of Ca²⁺ and Mg²⁺ in mineral water, river water, and seawater samples within only a few minutes using only the naked eye—no need of instruments.     

Micromechanical assessment of PMMA microcapsules containing epoxy and mercaptan as self-healing agents

Mechanical properties of microcapsule shell have great influence on microcapsule suitability as a mechanical trigger in a self-healing composite. The elastic modulus and hardness of polymethyl methacrylate (PMMA) microcapsules containing epoxy prepolymer (EC 157) and pentaerythritol tetrakis (3-mercaptopropionate) (PETMP) as healing agents were investigated using nanoindentation technique. The influence of the PMMA average molecular weight (M_W), the kind of core material, and the mechanical mixing rate on the mechanical properties of the microcapsule shell were studied using the Taguchi experimental design approach. The results indicated that the most important factors which affect the elastic modulus and the hardness of microcapsules shell are the Mw of PMMA and the kind of core material. The average elastic modulus of PMMA shell of epoxy and mercaptan-loaded microcapsules was found between 2.386 and 3.495 GPa. The hardness of PMMA shell of healing agent microcapsules was obtained in the range of 0.064–0.219 GPa. This constitutes essential knowledge in order to design capsules with tailored properties for self-healing materials.     

Raman spectroscopy of a-C:H:N films deposited using ECR-CVD with mixed gas

Ultraviolet (UV) and visible Raman spectroscopy were used to study a-C:H:N films deposited using ECR-CVD with a mixed gas of CH₄ and N₂. Small percentage of nitrogen from 0 to 15% is selected. Raman spectra show that CN bonds can be directly observed at 2220 cm⁻¹ from the spectra of visible and UV Raman. UV Raman enhances the sp¹ CN peak than visible Raman. In addition, the UV Raman spectra can reveal the presence of the sp³ sites. For a direct correlation of the Raman parameter with the N content, we introduced the G peak dispersion by combining the visible and UV Raman. The G peak dispersion is directly relative to the disorder of the sp² sites. It shows the a-C:H:N films with higher N content will induce more ordered sp² sites. In addition, upper shift of T position at 244 nm excitation with the high N content shows the increment of sp² fraction of films. That means the films with high N content will become soft and contain less internal stress. Hardness test of films also confirmed that more N content is with less hardness.     

Growth and characterization of new semi-organic l-proline strontium chloride monohydrate single crystals

The present communication deals with the synthesis, single crystal growth and characterization of a new nonlinear optical material l-proline strontium chloride monohydrate (l-PSCM). Single crystals have been grown using the slow solvent evaporation technique. Single crystal XRD analysis confirmed that the crystal belongs to the orthorhombic structure with lattice parameter a=6.6966(3) Å, b=12.4530(5) Å, c=15.2432(5) Å and space group P2₁2₁2₁. Presence of various functional groups in l-PSCM and protonation of the ions were confirmed by Fourier transform infrared spectroscopy (FT-IR) analysis. The melting point of the single crystal was found to be 126 °C using DSC. Ultraviolet-visible spectral analyses showed that the crystal has low UV cut-off at 226 nm combined with very good transparency of 90% in a wide range. The optical band gap was estimated to be 5.82 eV. Capacitance and dielectric-loss measurements were carried out at different temperatures in the frequency range 1 kHz-2 MHz. The dielectric constant and loss factor were found to be 21 and 0.03 at 1 kHz at room temperature, respectively. Microhardness mechanical studies show that hardness number (H_v) increases with load for l-PSCM single crystals the by Vickers microhardness method. Second harmonic generation (SHG) efficiency was found to be 0.078 times the value of KDP.     

Role of carbon in the formation of hard Ge1−xCx thin films by reactive magnetron sputtering

We have deposited germanium carbide (Ge_1−xC_x) films on Si(1 0 0) substrate via radio-frequency (RF) reactive magnetron sputtering in a CH₄/Ar mixture discharge, and explored the effects of carbon content (x) on the chemical bonding and hardness for the obtained films. We find that x significantly influences the chemical bonding, which leads to a pronounced change in the hardness of the film. To reveal the relationship between the chemical bonding and hardness, first-principles calculations have been carried out. It is shown that as x increases from 0 to 0.33, the fraction of sp³ C-Ge bonds in the film increases at the expense of Ge-Ge bonds, which promotes formation of a strong covalently bonded network, and thus enhances the hardness of the film. However, as x further increases from 0.33 to 0.59, the fraction of sp³ C-Ge bonds in the film gradually reduces, while that of sp³ C-H and graphite-like sp² C-C bonds increases, which damages the compact network structure, resulting in a sharp decrease in the hardness. This investigation suggests that the medium x (0.17<x<0.40) is most favorable to the preparation of hard Ge_1−xC_x films due to the formation of dominant sp³ C-Ge bonds.     

Mechanical and magnetic properties of ZnO/Fe2O3 ceramic varistors

Mechanical and magnetic properties of the ZnO/Fe₂O₃ ceramic varistors have been examined by using mechanical analyzer, digital microhardness tester and vibrating sample magnetometer. The initial stress–strain behavior is found to be linear (elastic) then becomes nonlinear (plastic deformation) without reaching the failure limit up to the maximum available stress (0.07 MPa). The compressive elastic modulus varies between 0.2 and 0.8 MPa with Fe addition up to 0.50. Furthermore, an approximately monotonically linear decrease in VHN with increasing Fe content up to 50% has been observed for all applied loads, which closely resembles the behavior of the true hardness and the surface energy. The magnetic measurements revealed an antiferromagnetic to paramagnetic to transition for all Fe doped samples. The Fe free sample showed paramagnetic behavior down to 2 K. The Neel temperature moderately increased from 18 K at 0.05% Fe to 25 K at 0.5% Fe. The magnetization (M) versus applied magnetic field (H) did not reach saturation for all samples up to 9 Tesla. The saturated magnetization (per Fe contents) is low and found to decreases linearly at a rate of (−35 emu/g-Fe) in a clear manifestation of the strengthening of the antiferromagnetic exchange interaction with increasing Fe contents.