镁掺杂对In2O3电导和气敏性能的影响

用共沉淀法制备了Mg2 + 掺杂的In2 O3 纳米粉 ,研究了镁掺杂对In2 O3 电导和气敏性能的影响 .结果表明 :MgO和In2 O3 间可形成有限固溶体In2 -xMgxO3 (0≤x≤ 0 .40 ) ;MgIn× 电离的空穴对材料导带电子的湮灭 ,使掺镁纳米粉的电导变得很小 ;n(Mg2 + )∶n(In3 + ) =1∶2共沉淀物于 90 0℃下热处理 4h ,用所得的纳米粉制作的传感器在 32 0～ 370℃下 ,对 45 μmol/LC2 H5OH的灵敏度达 10 2 .5 ,为相同浓度干扰气体Petrol的 12倍多 .     

合肥光源二分割三角型光位置检测器的研制

介绍了一种用于合肥光源的二分割三角型光位置检测器的研制,对其主要性能(如灵敏度和线性范围)进行了理论分析和实际测量,测量结果与理论分析相当吻合.文中还给出了光位置测量系统的组成     

Thermal characterisation of micro-hotplates used in sensor structures

Micro-hotplates operated at elevated temperature form the basic element in several sensor devices, such as integrated calorimetric or Taguchi-type gas sensors and flow-rate sensors. In all of these applications thermal properties of the sensing elements play a determining role in functional operation, therefore, their accurate characterisation is essential. The micro-hotplates investigated were developed by one side porous silicon micro-machining technology, forming Pt micro-filaments embedded in non-stoichiometric silicon nitride, and suspended across a cavity. This work is dealing with the accurate temperature detection in the micro-scale by different measurement methods for the deduction of steady state and transient thermal properties from the results. Transient properties of the structure were investigated by application of a simplified thermal equivalent circuit model.     

Analysis of a demodulation system for Fiber Bragg Grating sensors using two fixed filters

The analysis of a demodulation system for Fiber Bragg Grating sensors based on two fixed spectral filters has been carried out both theoretically and experimentally. Different system configurations were analyzed by modifying the spectral position of the filters as well as the optical power-level of the signal reaching the two photo-detectors. Measurements with integration times that varied from 0.01 to 1 s have been compared with the low-frequency limit predicted for long-term operation. Comparisons between simulated and experimental results show good agreement, and extrapolations indicate that it should be possible to achieve an operating spectrum range of the order of 7 nm, with uncertainties equivalent to less than 2 pm in measurements of the sensor peak position.     

硬盘驱动器巨磁电阻(GMR)磁头:从微米到纳米

近年来电脑硬盘存储密度的飞速增长(年增长100％)已超出摩尔定律的预言．这种惊人的高速增长中，最关键的因素是自旋阀纳米多层膜结构，即巨磁电阻(GMR)读传感器磁头的应用．事实上，巨磁电阻磁头读传感器(reader sensor)已经实现由微电子器件向纳米电子器件转化，并且形成大规模产业．这一过程包含了自旋电子学、材料科学、微电子工程学、化学、微机械力学和工程学等诸学科和相关微加工技术综合性挑战极限，进入纳米科技领域实质性进步．     

光纤加速度传感器研究进展

光纤加速度传感器与传统加速度传感器相比，不但能抗电磁干扰，而且体小、质轻、动态范围宽、精度高、能在恶劣环境下工作，因此受到各先进国家军事与商业领域的极大重视，各种实用的光纤加速度传感器不断涌现。主要有光强调制型和相位调制型两大类。光强调制式有反射式、透射式和偏振式等等。相位调制式有Ｍａｃｈ－Ｚｅｎｄｅｒ干涉仪、Ｍｉｃｈｅｌｓｏｎ干涉仪和Ｆａｂｒｙ－Ｐｅｒｏｔ干涉仪。有一维的，也有二维的；有与水听器组合在一起的，也有与光纤陀螺仪组合的光纤加速度传感器。最小的已经做到２．５ｃｍ长，直径仅０．２５ｍｍ；测量精度已能达到１μｇ；共振频率可达到１０ｋＨｚ。为了克服温度不稳定性对测量精度的影响，人们采用了３×３耦合器解调法，双光路法，由单臂式改成推挽式等。一旦关键技术得以克服，光纤加速度传感器将会在惯性导航和其它领域发挥更重要的作用。本文将分别介绍目前各种类型光纤加速度传感器的结构、特点、走向实用化存在的问题。     

机器人避障功能的设计

本文介绍了通过硬件的连接以及利用汇编语言编写简单程序使机器人实现避障功能.     

荧光光纤温度传感器激励光源的选择

本文分析计算了荧光光纤温度传感器的温敏元件——GsAlAs/GaAs双异质结半导体材料的荧光辐射效率与激励光波长的关系。讨论了温度测量范围及温敏元件GaAlAs层铝含量对激励光源的限制,在0～200℃测温范围内,若采用LED作激励光源,其峰值波长应在0.70～0.76μm之间选择。     

Traces of functions with a dominating mixed derivative in ℝ<Superscript>3</Superscript>

We investigate traces of functions, belonging to a class of functions with dominating mixed smoothness in ℝ³, with respect to planes in oblique position. In comparison with the classical theory for isotropic spaces a few new phenomenona occur. We shall present two different approaches. One is based on the use of the Fourier transform and restricted to p = 2. The other one is applicable in the general case of Besov-Lizorkin-Triebel spaces and based on atomic decompositions.     

Study of fiber optic sugar sensor

Over the last two decades, the fiber optic technology has passed through many analytical stages. Some commercially available fiber optic sensors, though in a small way, are being used for automation in mechanical and industrial environments. They are also used for instrumentation and controls. In the present work, an intensity-modulated intrinsic fiber optic sugar sensor is presented. This type of sensor, with slight modification, can be used for on-line determination of the concentration of sugar content in sugarcane juice in sugar industry. In the present set-up, a plastic fiber made of polymethylmethacrylate is used. A portion of the cladding (1 cm, 2 cm, 3 cm) at the mid-point along the length of the fiber is removed. This portion is immersed in sugar solution of known concentration and refractive index. At one end of the fiber an 850 nm source is used and at the other end a power meter is connected. By varying the concentration of sugar solution, the output power is noted. These studies are made due to the change in refractive index of the fluid. The device was found to be very sensitive which is free from EMI and shock hazards, stable and repeatable and they can be remotely interfaced with a computer to give on-line measurements and thus become useful for application in sugar industries.