Growth kinetics of iron boride layers: Dimensional analysis

Dimensional analysis is presented as a powerful tool in the study of the paste boriding process. In particular, a dimensional method is used to study the growth kinetics of the boride layers FeB and Fe₂B. Experiments were performed in AISI 1045 steel and AISI M2 steel, to test the suggested model. Samples of 1045 steel were prepared and treated using boron paste thickness of 3-5 mm, at temperatures of 1193, 1223 and 1273 K, with 2, 4 and 6 h of treatment time. The M2 specimens had boron paste thickness of 3 and 4 mm and temperatures of 1223, 1253 and 1273 K for 2 and 6 h. Results indicate that the growth of boron layers obeys power laws of the form y = αx^β, where α and β constants are a function of the material and the interface of interest. Validation of the model was carried out using experimental data with an average error percentage of 7.6% for Fe₂B in 1045 steel, 15.8% for FeB and 3.4% for Fe₂B in M2 steel.     

随机环境下的对称零程过程的大偏差原理

利用相对熵方法及鞅方法给出了随机环境下的对称零程过程的经验测度的收敛速度函数.     

The electronic structure of the interface between thin conjugated oligomer films and inorganic substrates with different work function

In this work, a comparison of the interfacial electronic properties between a semiconducting oligomer and a variety of substrates with different properties—metal, semiconductor and oxide layers—is reported. The interface formation was studied by X-ray and Ultraviolet photoelectron spectroscopies (XPS, UPS). High purity oligomer films with thickness up to 10 nm were prepared by stepwise evaporation on the clean substrates under ultrahigh vacuum (UHV) conditions. Analysis of the oligomer and substrate related XPS spectra clarified the interfacial chemistry and band bending in the semiconducting materials. The valence band structure and the interfacial dipoles were determined by UPS. The barriers for hole injection were measured at the interfaces of the organic film with all substrates. The interfacial energy band diagrams were deduced in all cases from the combination of XPS and UPS results. Emphasis was given on the influence of the substrate work function (eΦ) on the electronic properties of these interfaces.     

1.54μmEr3+,Yb3+共掺玻璃激光器的速率方程及数值分析

LD抽运共掺Er,Yb玻璃激光器中的跃迁过程较复杂,针对双掺离子之间的能量传递和Er3+的多种跃迁过程,给出了详细的准三能级系统的速率方程,在合理简化后进行了数值分析,分析了Er3+掺杂浓度和介质长度、抽运光斑、输出镜透过率、谐振腔长、抽运光的椭圆度等因素对激光阈值及斜率效率的影响. 关键词： 1.54μm激光 Er3+玻璃 速率方程 数值分析     

Simulation of a turbulent premixed open V-shaped flame using contour advection with surgery

Despite its capability of high spatial resolution, simulation of turbulent flows with traditional Lagrangian (front tracking) scheme is often discouraged by numerical instability caused by clustering of marker nodes and topological changes of fronts. Contour advection surgery (CAS), being a robust front tracking scheme, can limit the growth of front complexity during simulation without jeopardizing accuracy or efficiency. This allows it to open up an advantage over traditional front-tracking schemes. It has already been demonstrated that CAS, with incorporation of the reaction sheet model, can accurately simulate the propagation and advection of a turbulent premixed V-shaped flame. In this study, it is further tested with 10 values of vortex circulation. A range of upstream turbulence levels of 1.8–19.8% was obtained. Results indicate that upstream turbulence increase the average flame length, flame zone area and the overall burning rate. Flame surface density Σ was also estimated. Maximum values of Σ obtained lie in the range 0.1–1.4 mm⁻¹. Skewness towards the burnt region was observed in all profiles of Σ. Similar to results from laboratory experiments, it was found that Σ values decreases with upstream turbulence. From this study, the ability of CAS to cope with intense turbulence is demonstrated and a better quantitative understanding on the scheme has also been acquired.     

Epitaxy: the motion picture

The engineering of many modern electronic devices demands control over a crystal down to the thickness of a single layer of atoms—and future demands will be even more challenging. Such control is achieved by the method of crystal growth known as epitaxy, and that makes this method the subject of intense study. More than that, recent advances are revolutionizing our knowledge of how surfaces grow. In fact, growing surfaces show a beautifully rich variety of phenomena, many of which are only now beginning to be uncovered. In the past few years many surface imaging techniques have been used to give us a close look at how crystals grow—while they are growing. The purpose of this article will be to illustrate some of the ways real surfaces grow and change as revealed by some of the latest in situ microscopic imaging technologies.

It is often said that crystal growth is more of an art than a science. Here we will show that it is emphatically both.     

Solutions in Sobolev spaces of vector refinement equations with a general dilation matrix

In this paper, we present a necessary and sufficient condition for the existence of solutions in a Sobolev space W_p^k(ℝ^s) (1≤p≤∞) to a vector refinement equation with a general dilation matrix. The criterion is constructive and can be implemented. Rate of convergence of vector cascade algorithms in a Sobolev space W_p^k(ℝ^s) will be investigated. When the dilation matrix is isotropic, a characterization will be given for the L_p (1≤p≤∞) critical smoothness exponent of a refinable function vector without the assumption of stability on the refinable function vector. As a consequence, we show that if a compactly supported function vector φ∈L_p(ℝ^s) (φ∈C(ℝ^s) when p=∞) satisfies a refinement equation with a finitely supported matrix mask, then all the components of φ must belong to a Lipschitz space Lip(ν,L_p(ℝ^s)) for some ν>0. This paper generalizes the results in R.Q. Jia, K.S. Lau and D.X. Zhou (J. Fourier Anal. Appl. 7 (2001) 143–167) in the univariate setting to the multivariate setting. Dedicated to Professor Charles A. Micchelli on the occasion of his 60th birthday Mathematics subject classifications (2000) 42C20, 41A25, 39B12. Research was supported in part by the Natural Sciences and Engineering Research Council of Canada (NSERC Canada) under Grant G121210654.     

Tunneling Radiation of a Torus-Like Black Hole in Anti-de Sitter Space-Time

An extension of the Parikh-Wilczek's semi-classical quantum tunneling method, the tunneling radiation of the charged particle from a torus-like black hole is investigated. Difference from the uncharged mass-less particle, the geodesics of the charged massive particle tunneling from the black hole is not light-like, but determined by the phase velocity. The derived result shows that the tunneling rate depends on the emitted particle's energy and electric charge, and takes the same functional form as uncharged particle. It proves also that the exact emission spectrum is not strictly pure thermal, but is consistent with the underlying unitary theory. PACS Numbers: 04.70.Dy, 97.60.Lf, 05.30.Ch.     

反馈网络中电位器对调节器性能的影响

通过对各种类型的调节器中含有电位器时传递函数的求解分析,得出接入电位器后对调节器的比例放大系数、微分时间常数及积分时间常数的影响结果,并使多种调节器在形式上得到了统一,根据需要可方便地调节电位器使其性能达到设计的需要.     

高应变率扭转SHB实验技术

介绍自制分离式霍布金生扭杆试验设备；详细推导出按扭转ＳＨＢ方法测量材料的动态剪应力和剪应变关系的基本方程；对软铝进行高应变率试验得到动态剪应力和剪应变关系曲线。