共享式增长视角下温州接轨海峡西岸经济区产业联动策略研究

区域产业联动是推进区域一体化和区域经济协调发展的重要形式.基于共享式增长视角,结合温州的区位条件及功能定位,分析了温州对接海峡西岸经济区产业联动的现实基础,提出促进温州与该经济区各次区域产业联动的策略.     

Electrovectorial Effects of Electrically Polarized Hydroxyapatite on Biological Phenomena

Electrically polarized hydroxyapatite ceramics have chemical, physical, and biological effects upon their surrounding constituents in vivo as well as in vitro as electrets, independent solids irradiating electrostatic force. Using the polarized hydroxyapatite, we have observed that crystal growth from a simulated body fluid can be accelerated or decelerated, and microorganisms can be manipulated on the surfaces of hydroxyapatite, depending upon the electric signs.     

Wrinkling and Growth Mechanism of CuO Nanowires in Thermal Oxidation of Copper Foil

We report a systematic study on wrinkling and CuO nanowires （NWs） growth in the thermal oxidation of copper foil. Copper foils with thickness of 0.5 mm were thermally oxidized in air at 500℃ for 0.5-10 h. It is found that all the samples have wrinkles and the size of the wrinkles increases with the oxidation time increasing. CuO NWs can grow on both the sidehill and hilltop of wrinkle. The CuO NWs on sidehill are longer and denser than those on hilltop. The growth direction of the CuO NWs on sidehill is not vertical to the substrate but vertical to their growth surfaces. The process of wrinkling and CuO NWs growth can be divided into three stages： undulating, voiding, and cracking. The CuO NWs on both sidehill and hilltop grow at the undulating stage. However, only the CuO NWs on sidehill grow and those on hilltop stop growing at the voiding and cracking stages because of the void in hilltop. The local electric field in a wrinkle at undulating stage was calculated, and it is found that the difference of local electric field strengths between hilltop and sidehill is small, which indicates that the predominant driving force for the diffusion of Cu ion during CuO NWs growth is internal stress.     

CuInS2纳米纸阵列薄膜的制备及生长机理

采用溶剂热合成技术,以氯化铜、硝酸铟和硫脲为反应物,十六烷基三甲基溴化铵(CTAB)为阳离子表面活性剂,草酸为还原剂,无水乙醇为溶剂,直接在掺氟的SnO2透明导电玻璃(FTO)衬底上合成CuInS2(CIS)薄膜.采用扫描电子显微镜(SEM)、高分辨率透射电子显微镜(HRTEM)、X射线衍射(XRD)、拉曼光谱、能量色散谱(EDS)、紫外-可见(UV-Vis)反射光谱和透射光谱对样品的形貌、结构、成分和光学性能进行分析.结果表明,在适当的反应物浓度下,在FTO衬底上形成了垂直衬底生长的、具有良好结晶性能的黄铜矿结构的CIS纳米纸阵列薄膜.CIS薄膜中Cu,In,S的原子比为1.1∶1∶2.09,在紫外-可见和近红外波段具有良好的光吸收特性,禁带宽度约1.51 eV.结合不同反应时间制备的CIS薄膜的形貌、结构和成分分析,讨论了CIS纳米纸阵列薄膜的生长机理.     

First principles calculation of the opto-electronic properties of (110) growth axis SiGe superlattices

Using two versions of the first principles full potential linear muffin-tin orbitals method (FPLMTO) which enable an accurate treatment of the interstitial regions, the electronic and optical properties of (110) growth axis Si/SiGe superlattices are investigated. A comparative study with (001) growth axis superlattices is made. In particular, it is found that the bottom of the conduction band (CB) is closer to Γ$\Gamma$ in the (110) system but the optical activity is not enhanced. Furthermore, the absorption spectra of the superlattices are calculated and are found to be quite different from those of bulk Si and Ge but fairly close to their average.     

纳米氧化锌的过饱和控制生长与大小分布控制.

"在非水介质中合成了纳米氧化锌,测定了纳米氧化锌的紫外吸收光谱,并用有效质量模型计算了粒子大小,开发并命名了一种称之为纳米粒子过饱和控制生长的技术,该技术涉及将小的纳米粒子悬浊液加入到大的粒子悬浊液中,结果因为不同大小粒子间的溶解度差异小的粒子将全部溶解,大的粒子将整体长大,大粒子悬浊液的粒子数将保持不变,大粒子的生长速度显著比Ostwald老化的高．该技术最显著的特征是只要最初两悬浊液粒子大小的差异足够大,分布不是太宽,则粒子大小的分布将会因为粒子如此长大而变窄．"     

基于HRTEM和Raman分析定向多壁碳纳米管阵列的生长机理

以二茂铁、二甲苯为前驱体,石英为衬底,在850 oC的管式炉内采用化学气相沉积法制备出了定向碳纳米管阵列. 高分辨透射电子显微镜和拉曼光谱的结果表明：碳纳米管阵列具有良好的定向性和多壁管状结构,石墨化程度高,并且只在表面存在少量单壁碳纳米管.定向多壁碳纳米管阵列的生长模式为“底部”生长模式,即在生长的初期,当催化剂颗粒较小时,析出的碳原子生成了单壁碳纳米管或与其性质类似的多壁碳纳米管(一般层数小于5层);催化剂颗粒逐渐长大后,大量的碳原子析出后生成了普通的多壁碳纳米管,从而形成了单壁碳纳米管只存在于碳纳米管阵列膜表面和多层碳纳米管膜表面与界面的现象.     

Coverage percentage and coverage rate of different DNA nanostructures grown on a mica substrate

In this study, we simultaneously grew different DNA nanostructures, including 5 helix ribbon (5HR), double-crossover (DX), and double-crossover with single hairpin (DX-SH) lattices, on a mica substrate, and we analyzed the concentration-dependent coverage percentages of 5HR at a fixed concentration of DX ([DX]), DX at a fixed [5HR], and DX-SH with both fixed [5HR] and [DX]. The structural features of the various nanostructures formed through mica-assisted growth annealing were confirmed via atomic force microscopy. To assess the temperature-dependent coverage rates on the given substrates, we introduced two simple models, i.e., the equipartition model (EPM) and the un-equipartition model (UEPM) which provide information on the amount of coverage for each of the given temperature. EPM provides an equal amount of the coverage percentage per temperature change due to its linear nature, but UEPM does not since it has a non-linear nature. The coverage percentages obtained by these models allow us to calculate, as a function of temperature, the coverage rates of 5HR at a fixed [DX] and DX-SH for both fixed [5HR] and [DX]. Although with EPM the coverage rates for the 5HR and DX-SH decreased linearly as the temperature decreased, they decreased non-linearly as the temperature decreased with UEPM.     

氮掺杂石墨烯的生长机理及其在乙苯选择性氧化中的应用

以热解氧化石墨烯材料为碳基底,分别使用有机氮源和无机氮源对其进行氮掺杂处理,制备了一系列氮掺杂石墨烯材料.采用透射电子显微镜、扫描电子显微镜、拉曼光谱和X射线光电子能谱等表征方法考察了氮掺杂石墨烯的生长机理.结果表明,随着制备过程中退火温度的改变,氮掺杂石墨烯中不同氮物种的含量有显著差别.这种差异是由不同氮物种化学环境的差异所导致的.所制备的含氮石墨烯材料对乙苯选择性氧化制苯乙酮反应均表现出优良的催化活性.其中,石墨氮的含量对于提高苯乙酮收率起到至关重要的作用.此外,通过氧化剂控制活化的方法可以消除过多的结构缺陷和过量氮掺杂对催化反应的不利影响,有效提升氮掺杂石墨烯的催化活性.     

Probing the Roughness of Porphyrin Thin Films with X-ray Photoelectron Spectroscopy

Thin-film growth of molecular systems is of interest for many applications, such as for instance organic electronics. In this study, we demonstrate how X-ray photoelectron spectroscopy (XPS) can be used to study the growth behavior of such molecular systems. In XPS, coverages are often calculated assuming a uniform thickness across a surface. This results in an error for rough films, and the magnitude of this error depends on the kinetic energy of the photoelectrons analyzed. We have used this kinetic-energy dependency to estimate the roughnesses of thin porphyrin films grown on rutile TiO₂(110). We used two different molecules: cobalt (II) monocarboxyphenyl-10,15,20-triphenylporphyrin (CoMCTPP), with carboxylic-acid anchor groups, and cobalt (II) tetraphenylporphyrin (CoTPP), without anchor groups. We find CoMCTPP to grow as rough films at room temperature across the studied coverage range, whereas for CoTPP the first two layers remain smooth and even; depositing additional CoTPP results in rough films. Although, XPS is not a common technique for measuring roughness, it is fast and provides information of both roughness and thickness in one measurement.