金负载量对低温水煤气变换Au/α-Fe2O3催化剂结构和性能的影响

采用共沉淀法制备了低温水煤气变换Au/α-Fe2O3催化剂。通过正交实验优化催化剂的还原活化条件，考察了金负载量对催化剂性能的影响。采用BET、XRD、UV-VIS、XRF、H2-TPR和O2-TPO等表征手段对催化剂的结构进行分析，并与其催化性能进行关联。结果表明，（1）采用10%-H2/N2还原气将催化剂在150 ℃原位还原9 h，其催化活性最高；（2）金的最佳负载量为8.00%，此时在催化剂制备过程中金的流失量较少，金粒子较小，也有利于抑制催化剂在反应过程中烧结；（3）TPR-TPO结果表明，金的负载量为8.00%时，Au/α-Fe2O3催化剂具有较易被还原、不易被氧化的性质，从而显示出最高催化活性。（4）Au/α-Fe2O3催化剂中的金以单质金（Au0）形式存在；其高活性与Au0-Fe3O4间的协同作用有关。     

Dipyrrolo[1,2-a;2':,1'-c]pyrazines. 7. Electrophilic Substitution of Dipyrrolo[1,2-a;2',1'-c]pyrazines and 5,6-Dihydrodipyrrolo[1,2-a;2',1'-c]pyrazines via Formylation of Dipyrrolo[1,2-a;2':,1'-c]pyrazines

A series of previously unreported aldehydes has been prepared by the formylation reaction of dipyrrolo[1,2-a;2':,1'-c]pyrazines and their 5,6-dihydro analogs by DMF and phosphorus oxychloride.     

Pericyclic and Heteroelectrocyclic Mechanisms for the Cyclization of 1,3,5-Hexatrien-1-one and Its 6-Aza Analog

The cyclization of 1,3,5-hexatrien-1-one, 1, and the Z- and E-isomers of 1-aza-1,3-butadienylketene 3 were studied using the semiempirical AM1 and PM3 methods. Cyclizations of compounds 1 and Z-3 are shown to occur via a mono-rotation mechanism with barriers of 15.49 and 32.85 kcal/mol respectively. The reactions proceed via non-planar transition states which result from rotation of the methylene group for compound 1 and the imino group for compound Z-3. Cyclization of E-3 proceeds via a non-rotatory mechanism through a planar transition state. The activation barrier is 4.83 kcal/mol (AM1). The electronic structures of the initial and final states, and of some intermediate structures, including the transition states for the cyclization of compounds 1 and 3, were analyzed by the natural orbital method using HF/6-31G*//AM1 calculations. Energetic, structural, and orbital criteria indicate the heteroelectric mechanism for the cyclization of compound E-3 and the pericyclic mechanism for the cyclization of compounds 1 and Z-3.     

peri-Naphthylenediamines. 36. 5,6-Bis(dimethylamino)acenaphthylene in [4+2] cycloaddition reactions. Synthesis and characteristic features of protonation of “proton sponges” with the 8,9-diazafluoranthene structure

5,6-Bis(dimethylamino)acenaphthylene is readily involved in [4+2] cycloaddition reactions with symm-tetrazine derivatives to form new proton sponges with the diazafluoranthene skeleton. Under analogous condition, 1,8-bis(dimethylamino)-4-vinylnaphthalene gave 4-pyridazinyl derivatives. The relative reactivities of 5,6-bis(dimethylamino)acenaphthylene, 1,8-bis(dimethylamino)-4-vinylnaphthalene, 5-dimethylaminoacenaphthylene, and acenaphthylene in the reactions with 3,6-diphenyl-symm-tetrazine are in a ratio of 32 : 17 : 14 : 1. The site of protonation of 3,4-bis(dimethylamino)-7,10-diphenyl-8,9-diazafluoranthene is controlled by the basicity of the solvent. The reaction in acetonitrile afforded the cation stabilized by an intramolecular hydrogen bond, whereas the reaction in dimethyl sulfoxide gave rise to the resonance-stabilized cation. 6,7-Bis(dimethylamino)phenalen-1-one was protonated only at the carbonyl group.     

Volumetric Properties of Aqueous 2-Chloroethanol Solutions and Volumes of Transfer of Some Amino Acids and Peptides from Water to Aqueous 2-Chloroethanol Solutions

Densities and apparent molar volumes of aqueous 2-chloroethanol were determined at temperatures from 15.0 to 34.4°C using digital densimetry. The results of the volumetric measurements have been used to calculate the following thermodynamic quantites at 25°C: V ₂ ^o = 55.05 ± 0.02 cm³-mol^–1, (V ₂ ^o/T)_p = 0.01486 ± 0.00318 cm³-K^–1-mol^–1, and (² V ₂ ^o/T ²)_p = 0.02972 ± 0.00318 cm³-K^–2-mol^–1. Partial molar volumes of transfer from water to 1 mol-dm^–3 2-chloroethanol have also been determined for L-glycine, L-alanine, L-serine, L-glutamic acid, and L-aspartic acid at 35.0°C. The transfer results have been explained in terms of the nature of the interactions of the groups in the solute and solvent. Hydration numbers of L-glycine and L-alanine have also been calculated in aqueous 2-chloroethanol.     

Palladium-catalyzed cycloheptatriene formation by [3+2+2] cocyclization of 2-substituted allylic alcohols and alkynes

Cycloheptatrienes were obtained by the reaction of 2-substituted allylic alcohols with alkynes in the presence of catalytic amounts of palladium complexes and p-toluenesulfonic acid.     

Reactions of substituted furo[3,2-<Emphasis Type="Italic">b</Emphasis>]pyrrole-5-carboxhydrazides and their biological activity

The reactions of substituted furo[3,2-b]pyrrole-5-carboxhydrazides 1 with 5-arylfuran-2-carboxaldehydes 2, 4,5-disubstituted furan-2-carboxaldehydes 3 and thiophene-2-carboxaldehyde 4 has been studied. The advantage of microwave irradiation on some of these reactions was reflected in the reduced reaction time and increased yields. Reactions of 1 with 4-substituted 1,3-oxazol-5(4H)-ones 11 led to diacylhydrazines 13 or to imidazole derivatives 14 depending on the temperature. 1,2,4-Triazole-3-thione 17 was synthesized by two-step reaction of 1 with phenylisothiocyanate and subsequent base-catalyzed cyclization of thiosemicarbazide 16. The effects of hydrazones 5–10 on inhibition of photosynthetic electron transport in spinach chloroplasts and chlorophyll content in the antialgal suspensions of Chlorella vulgaris were investigated.     

MgF2 Xerogels

MgF₂ protective and antireflective coatings have been conventionally produced by sputtering or chemical vapour deposition CVD [1, 2], but here sol-gel routes to MgF₂ are explored. MgF_2(M) and MgF_2(E) were prepared using an alkoxide:HF:ROH mole ratio of 1:2:200 with methanol and ethanol respectively. All sols were stable for over a year. X-ray diffraction confirmed the presence of MgF₂ in samples (but also traces of MgO), and X-ray photoelectron spectroscopy suggested some F deficiency in the surface. Nevertheless, the MgF₂ xerogels had surface areas and porosities that were very high and this may be used to advantage in coatings or sensors.     

Fluoroapatite - material for medicine,Growth, morphology and thermoanalytical properties

Fluoroapatite containing glass-ceramics were prepared from Li₂O-CaO-CaF₂-P₂O₅-SiO₂ system. The glass was melted at 1480°C for 1 h. The object of observation was the preparing crystal phase of fluoroapatite in amorphous glass matrix. The morphology of lithium disilicate glass-ceramics was studied by SEM. The crystal growth and thermal properties of fluoroapatite were studied by X-ray diffraction and DTA. The more the content of P₂O₅, the more the presence of fluoroapatite particles. SEM investigation clearly indicated the phase separation and formation of a primary crystalline phase of fluoroapatite in the studied glass-ceramics. DTA curves of the fluoroapatite samples exhibit exothermic effects in the temperature range 337-694°C depending on the composition of the materials. The position of exothermic peak for lithium disilicate on DTA curves moves with increasing specific surfacetowards lower temperatures which points on its preferential surface crystallization. As far as physical qualities are concerned, mainly color and gloss, the best qualities of all observed materials belong to glass-ceramics with 10% P₂O₅. This revised version was published online in July 2006 with corrections to the Cover Date.     

Dihydrogen Adduct (Co–H2) Complexes Displaying H-Atom and Hydride Transfer

The prototypical reactivity profiles of transition metal dihydrogen complexes (M-H₂) are well-characterized with respect to oxidative addition (to afford dihydrides, M(H)₂) and as acids, heterolytically delivering H⁺ to a base and H⁻ to the metal. In the course of this study we explored plausible alternative pathways for H₂ activation, namely direct activation through H-atom or hydride transfer from the σ-H₂ adducts. To this end, we describe herein the reactivity of an isostructural pair of a neutral S= and an anionic S=0 Co-H₂ adduct, both supported by a trisphosphine borane ligand (P₃^B). The thermally stable metalloradical, (P₃^B)Co(H₂), serves as a competent precursor for hydrogen atom transfer to ^tBu₃ArO^⋅. What is more, its anionic derivative, the dihydrogen complex [(P₃^B)Co(H₂)]¹⁻, is a competent precursor for hydride transfer to BEt₃, establishing its remarkable hydricity. The latter finding is essentially without precedent among the vast number of M-H₂ complexes known.