超临界二氧化碳在高分子合成及加工领域的应用

重点概述了近年来超临界二氧化碳作为环境友好介质在高分子合成与加工方面研究的新进展,具体介绍了在超临界二氧化碳中丙烯酸的合成及疏水改性方面所做的工作,并在此基础上,展望超临界二氧化碳作为高分子合成介质的前景。     

Synthesis and Crystal Structure of 2-Amino- 5,6-dihydro-4-（3,4-dimethoxyphenyl）-4H- benzo[h]chromene-3-carbonitrile

1 INTRODUCTION 2-Aminochromene is an important class of com- pounds found as the main compounds of many natu- rally occurring products employed as cosmetics and pigments and utilized as potential biodegradeable agro- chemicals[1～3]. In recent years, montmorillonite in natural and ex- changed forms has received considerable attention in different organic syntheses because of its environ- mental compatibility, low cost, high selectivity, reusa- bility and operational simplicity[4], such as …     

从头计算方法比较TiSi_2的C54相和C49相

采用平面波超软赝势描述多电子体系,利用密度泛函理论和广义梯度近似,计算出C54相和C49相TiSi2的晶格常数、体弹性模量、形成能、电子态密度(DOS)和Mulliken电荷布居等性质.通过比较这两种物质的性质,发现尽管两者形成能很相近,但C49相结构对称性差、体弹性模量小、熔点低,Ti原子d轨道的反键强、离子性弱.这些性质上的差异和C49相TiSi2在固相反应中优先形成有关.     

Spectrochemical Properties of Noncubical Transition Metal Complexes in Solutions. XIV. Angular Overlap Studies of bis(Salicylidene-2-aminothiazole)Copper(II) in Various Solvents

The copper(II) complex [Cu(sat)], where Hsat is salicylidene-2-aminothiazole (bidentate Schiff - base), was studied in variety of solvents. In the solid state, the complex is black. It has been characterized by elemental analysis, solubility in common solvents, molar conductivity, and ultraviolet (UV) and visible (Vis) spectroscopy. The complex is easily soluble in common solvents such as chloroform, dimethylformamide, dimethyl sulfoxide, and 1,4-dioxane. The known crystal structure of similar compounds shows planar coordination geometry for the copper center. Combined multitechnique experiments have been applied to confirm the structure of the complex in solutions. The molar conductivities indicate their nonelectrolyte properties in all these solvents. The spectroscopic measurements were used to study the coordination properties of donoratoms and their bonding abilities.     

球形SiO2-Al2O3的制备、结构和性能

将Na2SiO3·9H2O 溶液通过强酸性阳离子树脂进行离子交换得到酸性硅溶胶,再将硅溶胶与铝溶胶及六次甲基四胺混合后采用油柱成型法制备了球形SiO2-Al2O3复合氧化物. 通过XRD、BET 及TPD等手段对样品进行测试和表征, 结果表明, 600 ℃焙烧得到的SiO2-Al2O3中SiO2以无定型形式存在, 其比表面、孔容与表面酸性随SiO2含量的增加而提高, 孔径、堆密度随SiO2含量的提高而减小, 压碎强度基本保持不变.     

Nanoporous TiO2 Coatings for Infrared Detectors

In GaAs based infrared detectors, a considerable part of the incident light will be reflected at the surface, thus it decreases the detectors sensitivity considerably. In this paper, a TiO₂ nanoporous coating was prepared successfully on the GaAs substrate by sol-gel method. The optical parameters of the coating were also controlled successfully. It was proved that the coating could greatly improve the transmittance of the incident light, which agrees with the theoretical results quite well. In the 2.5–6.0 m waveband, the maximum transmittance of GaAs substrate is 56%, while the transmittance of the GaAs substrate coated with a nanostructured TiO₂ coating is about 94%.     

配合物Zn(Phe)(NO3)2·H2O(s)的低温热容和标准摩尔生成焓

利用精密自动绝热热量计直接测定了配合物Zn(Phe)(NO3)2·H2O(s) (Phe:苯丙氨酸)在78-370 K温区的摩尔热容. 通过热容曲线的解析得到该配合物的起始脱水温度为, T0=(324.27±0.37) K. 将该温区的摩尔热容实验值用最小二乘法拟合得到摩尔热容(Cp, m)对温度(T)的多项式方程, 并且在此基础上计算出了它的舒平热容值和各种热力学函数值. 依据Hess定律, 通过设计热化学循环, 选择体积为100 mL浓度为2 mol·L-1 的盐酸作为量热溶剂, 利用等温环境溶解-反应热量计分别测定混合物{ZnSO4·7H2O(s)+2NaNO3(s)+L-Phe(s)}和{Zn(Phe)(NO3)2·H2O(s)+Na2SO4(s)}的溶解焓为, ⊿dH0m,1 =(69.42±0.05) kJ·mol-1, ⊿dH0 m,2 =(48.14±0.04) kJ·mol-1, 进而计算出该配合物的标准摩尔生成焓为, ⊿fH0m =-(1363.10±3.52) kJ·mol-1. 另外, 利用紫外-可见(UV-Vis)光谱和折光指数(refractiveindex)的测量结果检验了所设计的热化学循环的可靠性.     

A new biodegradable polydepsipeptide microsphere for application in drug delivery systems

A sequential polydepsipeptide containing a tripeptide sequence L-alanyl-Lalanyl-ethyl L-glutamyl and an-hydroxy acid L-lactic acid, poly(Ala-Ala-Glu(OEt)-Lac), was synthesized to prepare the microspherical particles by the solvent evaporation process. In this case, the solvents play the most important role for the preparation of polydepsipeptide microspheres and, as an example, when 200 mg of the polydepsipeptide dissolved in 10 ml of 98/2% chloroform/dichloroacetic acid mixture was stirred at 400 rpm and 30 C, the microspherical particles with mean diameter of 58m were formed after pouring into 200 ml of 1% (w/v) poly(vinyl alcohol) solution. 17-Estradiol was incorporated into the particles, and the resulting particles were found to contain 5 mg of drug per 25 mg of the particle. The in vivo release of drug from the microspherical formulation was evaluated by measuring the pharmacological influence on rat prostate. It was found that the sufficient amount of drug, keeping the effective pharmacological influence, is supplied during the first 12-week period, followed by an incomplete supplying of drug intil the implant is perfectly degraded in vivo in the 25th week from the start of implantation.     

(2-甲基丙烯酰氧乙基)三甲基氯化铵-丙烯酰胺反相微乳液共聚合研究

采用SPAN-OP复合乳化剂和K_2S_2O_8-Na_2SO_3氧化还原引发剂,进行(2-甲基丙烯酰氧乙基)三甲基氯化铵-丙烯酰胺的反相微乳液共聚合。测得单体的竞聚率r_(DM·MC)=1.11±0.16,r_(AM)=0.53±0.08。在单体总浓度为20—40％(wt),引发剂浓度为0.01—0.05％,乳化剂浓度为10—18％,聚合温度为299K的条件下,得到共聚反应动力学方程:R_p=k[M]~(1.07)[I]~(0.52)[E]~(0.90),文中对上述结果做了解释。