大环二萜类化合物的研究(Ⅳ)——Isosarcophytol—A前体化合物的合成

Isosarcophytol-A(1)是1982年首次从澳大利亚软珊瑚(Nephthea brassica)中分离鉴定的西松烷型(Cembrane)大环二萜类化合物,其结构为6,10,14-三甲基-3-异丙基-3E,5E,9E,13E-环十四碳四烯-1-醇,是Sarcophytol—A(2)的异构体,但有关1的生物活性试验和全合成研究尚未见报道.我们在前文报道了以低价钛诱导的分子内二羰基偶联为环化方法,完成了天然大环二萜类化合物Cembrene—C的全合成和Sarcophytol—A(2)苄醚衍生物(3)的合成.本文报道以天然法呢醇4为起始原料,经区域选择性氧化、羟醛缩合等六步反应,合成了1的前体化合物11.合成路线如下:     

聚2,6-二甲基苯醚树脂分子量分布及其与冲击强度关系的研究

本工作建立了室温下用凝胶色谱法(GPC)测定聚2,6-二甲基苯醚(PPO)树脂分子量、分子量分布的方法。淋洗剂不采用文献申报道的毒性较大者,也不在较高柱温下进行,而采用甲苯(或氯仿)在室温下测定。对样品在甲苯中溶解温度、浓度和稳定性等都进行了系统研究,找到了最优化条件。GPC数据结合改性PPO(MPPO)产品性能测定结果,经仔细分析找到了影响MPPO产品质量的一个重要因素是PPO树脂中低分子量部分含量。它与产品冲击强度有明显的依赖关系。提出了一个从CPC谱图确定低分子量部分含量的方法。     

非晶态合金催化剂用于二甲基紫脲酸加氢反应

二甲基紫脲酸加氢反应;nicob/白炭黑催化剂;非晶态合金催化剂     

La2O3-Mo5Si3/MoSi2复合材料的高温氧化行为

研究了0．8％La2O3-MosSi3／MoSi2复合材料在1200℃空气中的高温氧化行为。结果表明：0．8％稀土和MoSi3的加入，使材料的抗氧化性能降低。MosSi3含量越高，材料的抗氧化性能越差。当MosSi3含量低于30％时，在氧化初始阶段，质量变化呈直线下降，随着氧化的进行，氧化逐渐增重，材料表面形成较致密的SiO2阻止了材料的进一步氧化，使得氧化增重较小。而0．8％La2O3-40％Mo5Si3／MoSi2复合材料却出现了“粉化”现象。0．8％La2O3．MosSi3／MoSi2复合材料抗氧化性能的降低，归因于Mo5Si3差的抗氧化性和材料致密度的降低；另外，稀土和Mo5Si3的加入，细化了材料的晶粒，使晶界面积增加，加速了氧在晶界中的扩散，促进了材料的氧化。     

Improvement of Dispersion and Release Properties of Nifedipine in Suppositories by Complexation with 2-Hydroxypropyl-β-cyclodextrin

Geometries, electronic properties and NMR-shielding of cucurbit[5]uril, decamethylcucurbit[5]uril, cucurbit[6]uril, cucurbit[7]uril, and cucurbit[8]uril are investigated with DFT calculations. All molecules are highly symmetrical with a distinct geometric flexibility. In addition with a characteristic partial charge distribution these findings account for their chemical complex building ability.     

表面包覆改性对纳米CeO2分散性的影响

了改善纳米CeO2在Zn-Al类共晶合金中的分散性,采用超声液相包覆法对纳米CeO2进行表面活性剂表面包覆改性,并用AES测定了包覆层的厚度,用TEM研究了CeO2的团聚状况,用TGA分析了有机物包覆层的炭化温度范围,最后用FE-SEM观察了CeO2在复合材料中的分散情况。结果表明,包覆在纳米CeO2表面的厚度约为20 nm的表面活性剂层提高了微粒的分散性,而且该包覆层在495℃时已经炭化。热力学计算的结果也表明,炭化层能与氧化膜反应,该反应提高了CeO2与基体间的润湿性,并使其均匀分布在基体合金中。     

KF－Al2O3催化下3，4－二氢－2H－吡喃[3,2-h]喹啉衍生物的合成

芳醛、8－羟基喹啉与丙二腈或氰乙酸乙酯KF－Al2O3催化下反应生成一系列新 的3，4－二氢－2H－吡喃[3,2-h]喹淋衍生物，产物的结构通过单晶X射线确证。     

苯并咪唑衍生物的合成改进

利用空气作氧化剂, 无需任何催化剂, 以甲醇作溶剂, 芳香醛与邻苯二胺反应一步合成苯并咪唑衍生物, 产率均超过69%, 产物的结构通过元素分析、红外光谱和核磁共振氢谱确证, 该方法具有操作简单、反应条件温和、环境友好的优点.     

Protein-coated β-ferric hydrous oxide particles: An electrokinetic and electrooptic study

Using microelectrophoresis and electric light scattering techniques, we investigated the adsorption characteristics, surface coverage and surface electric parameters of superstructures from two isoforms of plastocyanin, PCa and PCb, in an oxidized state adsorbed on β-ferric hydrous oxide particles. The surface electric charge and electric dipole moments of the composite particles and the thickness of the protein adsorption layer are determined in a wide pH range, at different ionic strengths and concentration ratios of PC to β-FeOOH. The adsorption of the two proteins was found to shift the particles’ isoelectric point and to alter the total electric charge and the electric dipole moments of the oxide particles to different extent. A “reversal” in the direction of the permanent dipole moment is observed at lower pH for PCb- than for PCa-coated oxide particles. Strict correlation is found between the changes in the electrokinetic charge of the composite particles and the variation in their “permanent” dipole moments. Data suggest that the adsorption of the proteins is driven by electrostatic and/or hydrophobic interactions with the oxide surfaces dependent on pH. The adsorption behaviour is consistent with the involvement of the “eastern” and “northern” patches of the plastocyanin molecules in their adsorption on the oxide surfaces that are differently charged depending on pH.     

Review of Directly Producing Light olefins via CO Hydrogenation

Directly making light olefins via CO hydrogenation is a promising process to obtain a nonpetroleum based supply of alkenes.Limited by the ASF distribution function of Fischer-Tropsch synthesis,the yield of light olefins (C2-C4) can not reach the desired levels,which is a great challenge to overcome.Beginning thermodynamic analysis,the ASF distribution function,the reaction performance of CO hydrogenation and slurry reactor studies.The problems currently faced by this research area are presented at the end of the article.