A Methodology for Estimating Kinetic Parameters and Reactivity Ratios of Multi‐site Type Catalysts Using Polymerization,Fractionation, and Spectroscopic Techniques

This work describes a polymer reaction engineering framework for understanding how catalyst kinetic parameters affect the microstructure of polyolefins made with single‐ or multi‐site catalysts. Moreover, a methodology for deconvolution and kinetic parameters estimation is presented to estimate the reactivity ratios of multi‐site catalysts based on the combination of polymerization, fractionation, and spectroscopic techniques, namely, gel permeation chromatography‐IR and carbon‐13 nuclear magnetic resonance spectroscopy. The methodology capabilities are then demonstrated and validated using a case study simulated via a Monte Carlo model including random noise in order to better represent experimental result uncertainties. The methodology can reverse engineer experimental results and estimate all relevant reaction performance parameters.     

凝胶渗透色谱-气相色谱-离子阱质谱法测定桔梗原药和当归提取物中101种农药残留

建立了凝胶渗透色谱（GPC）-气相色谱-离子阱质谱同时检测桔梗原药和当归提取物中101种农药残留的分析方法。方法采用乙腈超声辅助提取桔梗原药和当归提取物,浓缩提取液至近干后用乙酸乙酯-环己烷（1∶1, v/v）复溶,采用凝胶渗透色谱法（选取40 cm长、内径20 mm的凝胶渗透色谱柱）对样品进行净化,弃去前段含脂类、色素等杂质的流出液,收集17~30 min洗脱液并旋转蒸发浓缩至近干,甲苯1 mL定容上机。选用DB-5MS毛细管色谱柱分离待测物,通过离子阱质谱实现对101种农药残留的高效检测。方法通过优化前处理条件和离子阱二级质谱参数,有效降低了复杂中药基质对待测化合物的干扰,最大限度提高了样品中农药的定量准确性和回收率,101种农药3水平添加的平均回收率为58.3%~108.9%,每个添加水平10次独立重复测定的相对标准偏差为0.4%~16.5%,检出限（LOD）范围为0.2~40.0 μg/kg,可满足当前韩国、日本、欧洲规定的最大残留限量（maximum residue limits, MRLs）要求。方法具有操作简单快速、灵敏度高、重复性好等特点,凝胶渗透色谱技术的应用克服了固相萃取小柱净化容量不足的弊端,离子阱技术的应用可以进一步排除共流出基体杂质的干扰,提高定量和定性的准确性,检测效果优于常用的气相色谱-质谱法,是对中药中同时分析多种农药残留检测方法的有益补充。     

Addition-type polynorbornene with Si(CH3)3 side groups: Detailed study of gas permeation and thermodynamic properties

Polymerization of norbornene bearing Si(CH₃)₃ groups in the five position with the opening of double bonds was performed. By accurate selection of the ratios catalyst/co-catalyst and monomer/catalyst the samples with increased molecular mass (about 400,000) were obtained. Transport parameters of this, addition type poly(trimethylsilyl norbornene) (PTMSN) were measured using the gas chromatographic and mass spectrometric methods for different gases (H₂, He, O₂, N₂, CO₂, CH₄, C₂H₆, C₃H₈ and n-C₄H₁₀). Temperature dependence of the permeability coefficients (P) indicated that low activation energies of permeation (E_P) and diffusion (E_D) are characteristic for PTMSN. In some cases (CO₂, C₂H₆) negative E_P values were observed. Thermodynamics of vapor sorption in this polymer was studied using the inverse gas chromatography method. It was shown that PTMSN is characterized by very large solubility coefficients S similar to those of poly(trimethylsilyl propyne) (PTMSP). The comparison of the P, D, and S values of these highly permeable polymers showed that the greater permeability of PTMSP is determined by the larger D values. Application of different approaches for the determination of the size of microcavities in PTMSN indicated that this polymer is characterized by large size of microcavity (800–1200 ?³).     

Low solvent consumption gel permeation chromatography method

This study presents the possibility of reducing the volume of solvent necessary for gel permeation chromatography analysis by up to 20 times when using two 2.1-mm internal diameter (ID) columns instead of the traditional three 7.5-mm ID columns. The low solvent consumption method was optimized by evaluating the number of theoretical plates at different flow rates. By injecting a broad polystyrene standard 16 times, good reproducibility and accuracy of weight average molecular weights (M_w) and peak surface areas were obtained for the optimized method.     

全自动凝胶净化-浓缩-固相萃取/气相色谱-质谱法测定紫皮石斛中有机磷农药残留

建立了以凝胶渗透色谱(GPC)和固相萃取(SPE)净化、气相色谱-质谱(GC-MS)法同时测定紫皮石斛中10种有机磷农药残留的方法。样品用乙腈超声提取,提取液经GPC去除类脂杂质和大分子物质,后经Envi-Carb/NH2固相萃取柱净化,选择离子(SIM)监测模式检测,外标法定量。在26min内10种农药得到很好的分离,农药残留量在0.02~0.5μg/mL,方法的线性良好,相关系数为0.997 3~0.999 9,农药加标浓度为0.05mg/kg和0.2mg/kg时,加标回收率在70.4%~115.8%,相对标准偏差在2.8%~9.6%,满足国家标准要求,检出限为0.005 2~0.011mg/kg。方法简便、快速、灵敏、准确,能够运用于石斛中多组分有机磷农药残留的定性和定量分析。     

Water-soluble ABC triblock copolymers based on vinyl ethers: Synthesis by living cationic polymerization and solution characterization

Water-soluble ABC triblock copolymers of methyl vinyl ether (MVE), ethyl vinyl ether (EVE), and methyl tri(ethylene glycol) vinyl ether (MTEGVE) of various block sequences and carrying 20 monomer units in each block were synthesized by living cationic polymerization. In addition to the triblocks, one AB diblock, one BA diblock, and one statistical copolymer of MVE and MTEGVE carrying 20 units of each type of monomer were synthesized as controls. Moreover, three homopolymers each carrying 20 units of MVE and end groups of varying hydrophobicity were synthesized using three different initiators. The molecular weights and molecular weight distributions of all the polymers were determined by gel permeation chromatography (GPC) in tetrahydrofuran (THF). The number average degrees of polymerization (DP_ns) and composition of all the polymers were calculated by proton nuclear magnetic resonance (¹H-NMR) spectroscopy. The molecular weights and degrees of polymerization corresponded to the values expected from the monomer/initiator ratios. The calculated polydispersities were reasonably narrow at 1.3. Aqueous GPC studies at room temperature on the triblock copolymers showed that the polymers exist as isolated chains (unimers) in solution but they tend to assemble and form micelles in the presence of a sufficiently high salt concentration apparently due to the insolubility of the EVE units under the latter conditions. Triblocks with a different block sequence exhibited a different susceptibility to salt-induced micellization, as indicated by the retention volume of the micelles and the relative micelle/unimer peak areas. Similarly, the cloud points of the triblock copolymers covered a relatively wide temperature range from 56 to 72°C. These differences in micellization and cloud points suggest a profound effect of the location of the hydrophilic MTEGVE block on copolymer association. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 1181–1195, 1997     

On-Line Coupling of Separation Techniques to NMR

The hyphenation of chromatographic separation techniques with NMR spectroscopy is one of the most powerful and time-saving methods for the separation and structural elucidation of unknown compounds and molecular compositions of mixtures. Most of the routinely used NMR flow-cells have detection volumes between 40–180 μL for conventional separations with analytical columns, and the newest designs employ detection volumes in the order of 200 nL for capillary separations. The low flow rates used in capillary chromatography permit the use of deuterated solvents. Unequivocal structural assignment of unknown chromatographic peaks is possible by two-dimensional stopped-flow capillary HPLC-NMR experiments.     

加速溶剂萃取-GPC纯化-气相色谱-质谱法测定油区土壤中的16种多环芳烃

为了排除背景干扰,使测定数据更加准确,先通过加速溶剂萃取和GPC纯化方法富集油区土壤中约16种多环芳烃, 再借助于气相色谱 质谱建立了高效、准确的分析方法。该方法对16种多环芳烃的相关系数在0.997以上,检出限为0.8~7.3 ng/mL,回收率为82.8％~94.2％,相对标准偏差为1.38％~8.86％。对实际样品的分析检测结果表明,本方法在油区土壤中的多环芳烃分析方面值得推广。     

环氧大豆油与丙交酯星形共聚物支化度的表征

采用凝胶色谱(GPC)/示差检测器(RI)/十八角激光光散射仪(MALLS)联用技术, 对环氧大豆油(ESO)与丙交酯形成的星形共聚物(ESO-丙交酯)的结构进行了表征。实验结果表明: 随着ESO-丙交酯星形共聚物分子量的增长, 接枝数目呈现增多趋势、支化度从0.46E-4增大到0.78E-4、支化因子从0.82减小到0.15。本研究为高分子ESO-丙交酯星形支化共聚物的研究提供了科学依据。     

Simultaneous Deconvolution of the Molecular Weight and Chemical Composition Distribution of Polyolefins Made with Ziegler-Natta Catalysts

Heterogeneous Ziegler-Natta catalysts produce polyolefins that have broad distributions of molecular weight (MWD) and chemical composition (CCD). For such broad distributions, mathematical models are useful to quantify the information provided by polyolefin analytical techniques such as high-temperature gel permeation chromatography (GPC), temperature rising elution fractionation (TREF), and crystallization analysis fractionation (CRYSTAF). In this paper, we developed a mathematical model to deconvolute the MWD and CCD of polyolefins simultaneously, using Flory's most probable distribution and the cumulative CCD component of Stockmayer's distribution. We have applied this procedure to “model” polyolefin resins and to one industrial linear low-density polyethylene (LLDPE) resin. The proposed methodology is able to deconvolute theoretical distributions even when random noise is added to the MWDs and CCDs, and it can be used to calculate the minimum number of active site types on heterogeneous Ziegler-Natta catalysts.