Well‐defined non‐linear polyethylene‐based macromolecular architectures

Polyethylene (PE)‐based 3‐ and 4‐miktoarm star [PE(PCL)₂, PE(PCL)₃] and H‐type [(PCL)₂PE(PCL)₂] block copolymers [polycaprolactone (PCL)] were synthesized by a combination of polyhomologation, chlorosilane chemistry, and ring opening polymerization (ROP). The following steps were used for the synthesis of the miktoarm stars: (a) reaction of a hydroxy‐terminated polyethylene (PE‐OH), prepared by polyhomologation of dimethylsulfoxonium methylide with a monofunctional boron initiator followed by oxidation/hydrolysis, with chloromethyl(methyl)dimethoxysilane or chloromethyltrimethoxysilane; (b) hydrolysis of the produced ω‐di(tri)methoxysilyl‐polyethylenes to afford ω‐dihydroxy‐polyethylene (difunctional initiator) and ω‐trihydroxy‐polyethylene (trifunctional initiator); and (c) ROP of ɛ‐caprolactone with the difunctional (3‐miktoarm star) or trifunctional macroinitiator (4‐miktoarm star), in the presence of 1‐tert‐butyl‐2,2,4,4,4‐pentakis(dimethylamino)‐2λ⁵,4λ⁵‐catenadi(phosphazene) (t‐BuP₂). The H‐type block copolymers were synthesized using the same strategy, but with a difunctional polyhomologation initiator. All intermediates and final products were characterized by HT‐GPC, ¹H NMR and FTIR analyses. Thermal properties of the PE precursors and all final products were investigated by DSC and TGA. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2129–2136     

三聚噻吩的表面光电压谱研究

采用表面光电压和电场诱导表面光电压技术研究了三聚噻吩在外电场作用下的电子运动行为,结合三聚噻吩的UV光谱、极化子概念以及前线轨道理论,指认了三聚噻吩能级跃迁性质,即380nm附近的峰为带－带跃迁峰,477,465和600nm附近的峰是与单极化子有关的电子跃迁;而在770和990nm附近的峰则是与双极化子有关的电子跃迁峰。     

环氧大豆油与丙交酯星形共聚物支化度的表征

采用凝胶色谱(GPC)/示差检测器(RI)/十八角激光光散射仪(MALLS)联用技术, 对环氧大豆油(ESO)与丙交酯形成的星形共聚物(ESO-丙交酯)的结构进行了表征。实验结果表明: 随着ESO-丙交酯星形共聚物分子量的增长, 接枝数目呈现增多趋势、支化度从0.46E-4增大到0.78E-4、支化因子从0.82减小到0.15。本研究为高分子ESO-丙交酯星形支化共聚物的研究提供了科学依据。     

The Effect of Temperature on GPC for the Separation of PCBs from Transformer Oil and Subsequent Analysis by GC-MSD

Abstract

The analysis of PCBs often involves lengthy and expensive cleanup procedures to remove interferences associated with environmental sample matrices. Gel permeation chromatography (GPC) has proven to be a useful tool in removing many of these interferences from environmental samples, especially from difficult matrices such as oils, lipids and sediments. This paper describes the effect of temperature upon the GPC column in separating PCBs from transformer oil and its implication on GC-MS analysis.     

Unequal siblings: Adverse characteristics of naphtalene‐based hoveyda‐type second generation initiators in ring opening metathesis polymerization

A family of four different Hoveyda‐type initiators bearing a π‐extended carbene ligand was characterized regarding the activity in ring opening metathesis polymerization. One of the initiators shows high activity at ambient temperature, similar to the second generation Hoveyda–Grubbs catalyst and is even suited for the controlled polymerization of certain norbornene derivatives. The other family members exhibit a pronounced latency at room temperature, and polymerization can be triggered by heat. The scope of these initiators in the thermally triggered polymerizations of norbornene derivatives in general and dicyclopentadiene in particular was disclosed. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

Effects of hydration and hydrophilicity on Na‐Clay‐supported aqueous‐phase catalysis for atom transfer radical polymerization

Hydrated sodium montmorillonite (Na‐clay) has been used as a catalyst support for the heterogeneous atom transfer radical polymerization of benzyl methacrylate in the presence of various concentrations of water, reducing agent, and CuBr₂ in anisole at ambient temperature. The polymerization was promoted via reduction of Cu^II to Cu^I through the addition of sodium ascorbate (NaAsc) as a reducing agent in aqueous solution. The polymerizaton proceeded in a controlled manner and produced poly(benzyl methacylate) with moderately narrow molecular weight distribution (MWD) when performed under optimum conditions of hydration (10 wt % ≤ H₂O/Na‐clay ≤ 21 wt %) and reducing agent (0.15 ≤ [NaAsc]/[I] ≤ 0.23). The polymerization was uncontrolled if hydration and NaAsc exceed above their optimum range of concentrations. Apparent rate of the polymerization (k_app) increased in the presence of decane–anisole (1/3, v/v) mixture solvent. Selective adsorption of decane at the interfaces of the hydrated clay was attributed for the rate enhancement due to increased polymer and hydrophobic interface interaction. The polymerization progressed in a controlled manner as confirmed by the first‐order time‐conversion plot, linear increase in molecular weights, and moderately narrow MWDs over conversion. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Sulfonation of polystyrene: Toward the “ideal” polyelectrolyte

Sulfonation of narrow polydispersity polystyrene, PS, standards remains the method of choice for generating polystyrene sulfonate, PSS, samples with defined composition. Although a variety of sulfonation techniques have been described, relatively little is reported on the material obtained, which is used for so many studies on the fundamental behavior of polyelectrolytes. Here, we show that powdered polystyrene treated with concentrated sulfuric acid (96%) at 90 °C without catalyst yields fully sulfonated PSS. Extensive characterization with ¹H and ¹³C NMR as well as size exclusion chromatography coupled with static and dynamic light scattering shows no evidence of sulfone crosslinking or chain degradation under the conditions used. Though mono‐sulfonated as soon as it dissolves in the acid, the PSS contains about 6% meta substitution. Sulfonation kinetics for this heterogeneous reaction depend strongly on particle size, sulfuric acid content and temperature. For preparing perdeuterated PSS from the corresponding PS it is essential to employ D₂SO₄, as about half of the aromatic units undergo H/D exchange during sulfonation. The remaining ortho H/D may be exchanged with extended exposure to the concentrated sulfuric acid, but the meta site is deactivated. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2416–2624     

Stabilization of horseradish peroxidase by covalent conjugation with dextran aldehyde against temperature and pH changes

Stabilization of Horseradish Peroxidase (HRP; EC 1.11.1.7) against temperature and pH via the formation of the conjugates obtained by multipoint covalent bonding of dextran aldehyde (DA) to the enzyme were studied. Hence, three different molar weighted dextrans (17.5 kD, 75 kD, 188 kD) were covalently bonded to purified enzyme with different molar ratios (n_HRP/n_DA 20/1, 10/1, 1/1, 1/5, 1/10, 1/15, 1/20). The thermal stabilities of the obtained conjugates were evaluated with the activities determined at different temperatures (25, 30, 35, 40, 50, 60, 70, 80°C) applying 60 minutes incubation time. Conjugates formed were characterized by gel-permeation chromatography (GPC) and fluorescence techniques. The conjugate synthesized using dextran 75 kDa with n_HRP/n_DA 1/10 molar ratio showed better thermal stability than other conjugates and purified enzyme at pH 7. This conjugate also has wider activity pH range than purified enzyme. In addition, mentioned conjugate at pH 7 had very long storage lifetime compared to purified enzyme at +4°C and room temperature; which is considered a favorable feature for usage in practice.      

凝胶渗透色谱法测定聚丙烯腈共聚物分子量中宽分布校正法的应用

应用宽分布校正法对凝胶渗透色谱(GPC)进行了校正，将校正曲线用于聚丙烯腈(PAN)共聚物分子量的计算。对扣除色谱峰扩展效应前后的测试结果与乌氏粘度法测得的数据进行比较。结果表明，应用宽分布校正法时，必须扣除色谱峰扩展效应，才能得到较为准确的测试结果。     

Phosphorus ligands for iron(III)‐mediated ATRP of styrene via generation of activators by monomer addition

Styrene polymerization via generation of activators by monomer addition (GAMA) for atom transfer radical polymerization (ATRP) has been examined extensively with bulk FeX₃ and FeX₂ at 110 °C in conjunction with various phosphorus‐bearing ligands. It was found that GAMA possesses advantages over normal ATRP. Most importantly, narrower polydispersity index (PDI) values were observed from the styrene polymerizations with Fe(III) over those with Fe(II). Every instance of 2‐(diphenylphosphino)‐N,N′‐dimethyl‐[1,1′‐biphenyl]‐2‐amine and 2‐(diphenylphosphino) pyridine with the Fe(III) system were controlled excellently without addition of any radical initiator or reducing agent additives. Initiator type was found to exert a significant factor to influence on the controllability of polymerization. The initiation of 1‐phenylethyl chloride and methyl‐2‐chloropropionate gave rise to formation of polymers with narrow PDI (1.05–1.20), whereas those from 1‐phenylethyl bromide increased to 1.35. The GAMA of bulk styrene exhibited the best performance in terms of both rate and controllability compared with toluene and anisole. Both formation of block copolymer from the macroinitiator and efficient perturbation of polymerization with 2,2,6,6‐tetramethylpiperidine 1‐oxyl provided firm evidence to support the living and radical characteristics for the GAMA of styrene. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 144–151, 2010