数控机床实时误差补偿技术及其应用

以某厂一台数控双主轴车床为研究对象,根据齐次坐标转换原理,给出了该机床的几何误差和热误差的综合数学模型．对于不同的热误差因子,给出了不同的热误差数学模型,通过计算机分析合成误差曲线的斜率,分离了热误差和几何误差．补偿系统主要由微机结合机床控制器构成．由机床的温度信号和工作台运动位置信号结合综合误差数学模型,通过微机算出补偿值并送入机床控制器对刀架进行附加进给运动完成实时补偿．补偿试验表明,工件之间的尺寸变化可从原来的６０μｍ以上降到１４μｍ;工件的锥度变化从５０μｍ／ｃｍ以上降到１５μｍ／ｃｍ,大幅度提高了机床的加工精度,满足了工厂的实际生产需要．     

受控源作用分析

受控源作用分析程道林１房建州２（１徐州师范大学物理系,徐州,２２１００９;２徐州教育学院物理系,徐州,２２１００６）独立源作为电路的输入,代表着外界对电路的作用,在电路中起激励的作用．而受控源则不同于独立源,其电压或电流不是定值,也不是给定的时间函数...     

四氢吡喃醚的形成、裂解和转化

对四氢吡喃醚的形成、裂解和转化方法进行了综述,参考文献１１１篇。     

用户中继热线自动接续系统

提出以单片机为核心构成自动接续装置,检测程控交换机中继线路的直流状态和交流信号音,实现“热线电话”中继线路的自动接续．     

茶叶矿质元素浸出量与茶叶冲泡时间及冲泡次数的关系

研究了茶汤中茶叶１０种矿质元素（Ｋ、Ｃａ、Ｍｇ、Ｐ、Ａｌ、Ｆｅ、Ｍｎ、Ｓｒ、Ｂａ、Ｚｎ）的浸出量与茶叶冲泡次数以及冲泡时间的关系．结果表明：（１）茶叶中１０种元素的浸出量与茶叶冲泡次数之间具有显著的指数函数相关,相关方程为ｙ＝ａｅ－ｂｘ,１０种元素的浸出量与茶叶冲泡时间之间具有显著的对数函数相关,相关方程为ｙ＝ａ＋ｂｌｇｘ,各元素在两方程中的相关显著性均为α＜０．０１;（２）性质相近的元素,如Ｂａ与Ｓｒ在上述函数中的变化行为更为相近;（３）元素Ｋ、Ｚｎ、Ａｌ、Ｍｇ浸出比在３０％以上,可认为是易浸出元素,而元素Ｍｎ、Ｆｅ、Ｓｒ、Ｂａ、Ｃａ的浸出比低于３０％,可认为是较难浸出元素;（４）茶叶与茶汤之比为１∶１０,冲泡水温１００℃,冲泡时间２分钟,３泡茶汤已能充分利用茶叶中常见的人体营养元素Ｋ、Ｍｇ、Ｐ、Ｍｎ、Ｚｎ,元素浸出量与总浸出量之比在６０％以上．     

Geometric modules and Quinn homology theory

LetR be a ring with unit and invariant basis property. In [1], the authors define a functorK(_;R):TOP/LIP _c-LPEP by combining the open cone construction of [7] with a geometric module construction and show this functor is a homology theory. This paper shows that if attention is restricted to objects TOP/LIP _c with a homotopy colimit structure, then the functorK(_;R) is a Quinn homology theory, In particular, for each having a homotopy colimit structure,K(;R) is a homotopy colimit in the category of -spectra. Furthermore, the constituent spectra of this homotopy colimit are obtained naturally from the fibres of .Partially supported by the National Science Foundation under grant number DMS88-03148.Partially supported by the SNF (Denmark) under grant number 11-7792.     

Reactions of Laser Ablation-magnesium Plasma with Methanol Clusters

IntroductionReactions of metal ions with neutral molecules orclusters produce a variety of metal complex ions andother new series of cluster ions including cations andanions.The laser ablation-molecular beam(LA-MB)method has marked its relevance in the st…     

Axial dispersion in a liquid fluidized bed of particles akin to immobilized enzymes

The axial dispersion of a liquid fluidized bed of controlled pore silica (CPS) particles has been determined by the pulse tracer method. The CPS used was the same as for enzyme immobilization, having an average diameter of 0.436 mm and mean pore size of 37.5 nm. The fluidization liquid is α-amylase liquefied manioc starch, 30% w/v, 45°C pH=4.5. Nominal bed porosities tested were 0.7 and 0.8. The results show that the axial dispersion coefficient increases with greater superficial liquid velocities. Various available correlations tested disagree with each other to a large extent and are unable to represent collected experimental data.     

聚L－谷氨酸－炔诺酮肟酯复合体的制备

合成了聚Ｌ－谷氨酸－炔诺酮肟酯的复合体，炔诺酮的接入量为２２．８％．体外释放时间约１５大。     

主链含膦酸酯的聚酸酐药物控制释放材料研究

通过二氯膦甲（乙）酸乙酯与对羟乙氧基苯甲酸反应，制备了二羧苯氧乙氧基膦甲（乙）酸乙酯，并其转化成混合醋酐并通过熔融缩聚，合成了主链含膦甲（乙）酸乙酯的聚酸酐，以二羧苯氧乙氧基膦甲（乙）酸乙酯，分别与１，３－双（４－羧基苯氧基）丙烷（ＣＰＰ）及癸二酸（ＳＡ）共聚，得到相应的共聚酸酐，对所合成的单体和聚合物的结构进行了表征，研究了它们的体外降解，酶促降解及其对抗肿瘤药物５－氟尿嘧啶和氨甲喋蛉的释放性能