微机控制防盗监控报警系统

介绍微机控制防盗监控报警系统的工作原理，系统组成，控制软件，抗干扰措施及发展设想，运行结果表明该系统功能强，灵敏度高操作方便。     

电压零点启动技术及其在声光控制开关中的应用

采用电压零点启动技术,消除白炽灯启动时的大电流冲击,防止声光控开关中可控硅元件的启动电流过载,从而延长开关自身的使用寿命.     

鄂尔多斯盆地奥陶系马家沟组储渗空间类型与形成机制

文章从受组构控制角度总结出鄂尔多斯盆地奥陶系马家沟组存在着４类储渗空间，通过岩石学、地球化学特征的研究，认为与盐膏溶蚀有关的缝孔洞是同生期暴露大气水作用的产物，白云岩中与白云石溶蚀有关的缝孔洞则是同生期大气水与海水混合作用的结果。文章还进一步建立了各类储渗空间的形成演化模式，提出了它们的有利发育区段     

利用低温和气调对鲜荔枝作检疫杀虫处理试验

应用在Ｏ２含量约为１％～５％、ＣＯ２约５％～６％和在２℃低温下处理１３ｄ的气调和低温综合处理技术，可完全杀死人工接种在荔枝鲜果中的桔小实蝇（Ｂａｃｔｒｏｃｅｒａｄｏｒｓａｌｉｓ）的卵和幼虫．不影响荔枝鲜果的品质     

锂快离子导体Li8A1-xSi2xP1-xO8系统的研究

以Li4SiO4为母体,煤矸石为原料,经高温固相反应制得Li8Al1-xSi2xP1-xO8系统的锂快离子导体.X射线衍射分析结果表明在0.5＜x＜0.9的组成范围内形成单一的固溶相,其空间群为P21/m,导电性测试结果表明x=0.6的合成物具有最高的电导率,在673 K时其电导率达到2.8×10-2S/cm,其活化能为60.80 kJ/mol.     

上覆煤柱工作面矿压显现及开采应对措施

通过对上覆煤柱工作面支承压力的分析及现场实际情况的总结,提出了工作面矿压显现特征和在煤柱下开采工作面所采取的应对措施。     

煤峪口矿307盘区工作面顶板管理

分析了采煤工作面机道漏顶的原因,提出了加强支架维修力度、加强现场管理和工人技术培训、加强矿压观测等加强顶板管理的措施。     

SHRIMP zircon U-Pb dating for volcanic rocks of the Dasi Formation in southeast Hubei Province, middle-lower reaches of the Yangtze River and its implications

The Jinniu Basin in southeast Hubei,located at the westernmost part of middle-lower val-ley of the Yangtze River,is one of the important vol-canic basins in East China. Volcanic rocks in the Jin-niu Basin are distributed mainly in the Majiashan Formation,the Lingxiang Formation and the Dasi Formation,consisting of rhyolite,basalt and basaltic andesite,(trachy)-basalt and basaltic trachy-andesite and (trachy)-andesite and (trachy)-dacite and rhyolite respectively,in which the Dasi volcanism is volumet-rically dominant and widespread. The Dasi volcanic rocks were selected for SHRIMP zircon U-Pb dating to confirm the timing of volcanism. The results indi-cate that there exist a large amount of magmatic zir-cons characterized by high U and Th contents in the volcanic rocks. The concordia ages for 13 points are 128 ± 1Ma (MSWD = 3.0). On account of the shape of zircons and Th/U ratios,this age is considered to represent the crystallization time of the Dasi volcan-ism. The volcanic rocks in the Dasi,Majiashan and Lingxiang Formations share similar trace elementand REE partition patterns as well as Sr-Nd isotopic compositions. In combination with the regional geol-ogy,it is proposed that the southeast Hubei volcanic rocks were formed mainly during the Early Creta-ceous,just like other volcanic basins in middle-lower Yangtze valley. A lithospheric extension is also sug-gested for tectonic regime in this region in the Cre-taceous Period.     

多普勒雷达机房附属设施远程控制系统

给出一种使用公用电话网进行远程控制雷达机房附属设施的系统。该系统采用普通双音多频电话机上的按键,作为控制命令按键,通过MT8870双音调多频接收机作电话双音多频解码核心,实现对雷达机房附属设施远程控制功能。     

三维韧性剪切变形构造组构样式探讨

结合三维变形理论,在Transpression变形模型基础上,提出了"剪切方向物质挤出模型",并从三维有限应变角度定量探讨剪切方向物质(体积)挤出对剪切带宏观组构样式、转变的影响及其与运动学涡度的关系。变形过程中剪切方向物质挤出对韧性剪切带构造组构样式影响显著:在减薄型三维变形中,当竖直(z)方向体积挤出量小于剪切运动(x)方向挤出量(两者比值a<1或a=1)时,发生"拉长-减薄剪切变形",剪切带发育稳定的竖直面理和水平线理,运动学涡度数(ωk)对面理和线理组合不产生影响;当a>1时,发生"加宽-减薄剪切变形",剪切带组构样式取决于2个因素:运动学涡度数(ωk)和剪切带收缩量(k),可能的组构组合类型为"竖直面理和水平线理"或"竖直面理和竖直线理"。根据剪切方向物质挤出模型,得到结论:同一运动性质的韧性剪切带可形成不同取向的拉伸线理;拉伸线理方向不一定和变形的简单剪切组分方向一致。