Determination of Paint Solvents by Vapour Phase Fourier Transform Infrared Spectrometry.

A fast procedure has been developed for the direct determination of paint solvents. The method is based on the injection of small volumes of untreated solvent mixtures into a heated Pyrex glass reactor in which the sample is volatilized and introduced by means of a flow of nitrogen into an IR multiple pass gas cell and the spectrum in the mid-IR region is registered as a function of time. Data found for samples are interpolated in calibration graphs obtained by injecting different volumes of pure compounds which constitute the solvent mixture. A methylisobutylketone (MIBK) toluene mixture was used as test system to develop the proposed procedure. The method provides a limit of detection of the order of 1–4 μg, a relative standard deviation of the order of 0.4 to 2% for five independent measurements, and recovery percentage values from 99.8 till 103.6 %. A commercial sample of polyurethane paint solvent has been analysed by the developed procedure.     

Reliability of flexible electrically conductive adhesives

Based on our previous work about electrically conductive adhesives (ECAs), a flexibilizer named 1,3‐propanediol bis (4‐aminobenzoate) was used to fabricate flexible ECAs (FECAs). ECAs, FECAs, and electronic devices connected by them were carried out the hot and humid aging test under constant humidity level of 85% relative humidity at 85 °C for 600 h. After aging, the bulk resistance change of ECAs was about 26%, that of FECAs was a little higher, about 29%. The contact resistance change of devices connected by ECAs and FECAs was very great, about 450% and 410%, respectively. The bonding area at connection interface between colloids and devices had delamination, even cracks. The delamination of ECAs was calculated about 60%, the average shear strength of ECAs was reduced about 45%, and those of FECAs were about 50% and 30%, respectively, so FECAs had a higher bonding stability in hot and humid environment. Copyright © 2012 John Wiley & Sons, Ltd.     

Thermal properties stability of UV irradiated PVA nanohybrid composites

Zn‐Al‐salicylic nanohybrid layers have been prepared and used as fillers for polyvinyl alcohol (PVA). Nanohybrid layers of a broad absorption area in UV region were completely and uniformly dispersed in a continuous polymer matrix. PVA and PVA nanohybrid composite (NHC) films were exposed to UV irradiation. Thermal properties (diffusivity, effusivity, and conductivity) of both have been measured through photoacoustic technique before and after UV irradiation. Thermal parameters of PVA suffered from a quick deterioration with UV exposure due to reduction of the phonon mean free path as a result of molecular chain scissions. However, significant stability in such parameters of NHC has been obtained under the influence of UV irradiation. This thermal properties stability may be an important step on the way of obtaining photostable polymer NHC. Copyright © 2012 John Wiley & Sons, Ltd.     

Micromechanics of polymers

Polymers possess a very large inherent capacity for property modifications. The bridge between structure or morphology and mechanical properties is created by the micromechanical processes of deformation and fracture, the “micromechanics.” Developments mainly in electron microscopy (EM) (scanning, transmission, and high-voltage electron microscopy) and scanning force microscopy (SFM) opened up a wide range of experiments previously impossible, including the in situ study of micromechanical processes. These new techniques are reviewed and used to study micromechanical properties of amorphous and semi-crystalline polymers and several toughened polymers. On the basis of the detailed knowledge of micromechanical mechanisms, a new method of polymer modification becomes a realistic possibility, a method of micromechanical construction of new polymeric systems.     

Zero-ϕeff non-Bragg gap solitons in 1D Kerr polaritonic/metamaterial heterostructures

A theoretical study of one-dimensional heterostructures composed of alternate layers of a Kerr polaritonic material and a linear dispersive metamaterial is performed. For frequency values at the edges of the non-Bragg zero-ϕ_eff gap of the heterostructure in the linear regime, a switching from very low to high transmission states is obtained and localized gap solitons of various orders are found, depending on the particular value of the incident power. Soliton solutions are shown to be robust with respect to absorption effects and a study is presented for gap soliton phases at the top and bottom of the zero-ϕ_eff gap in the case of defocusing and focusing nonlinearities.     

Toughening hydrogels by immersing with oppositely charged polymers

A very simple yet novel strategy to significantly enhance the mechanical properties of hydrogels is reported. Poly(acrylic acid) (PAA) hydrogels with aligned macroporous channels are immersed in the aqueous solutions of poly(dimethyl diallyl ammonium chloride) (PDMDAAC). Strong electrostatic interactions are formed between the anionic PAA and cationic PDMDAAC chains. In the resultant PAA/PDMDAAC hybrid hydrogels, the mass ratio of PDMDAAC to PAA is about 0.2 and PDMDAAC is uniformly distributed throughout the gels. The mechanical properties of the formed hybrid hydrogels are largely enhanced in comparison with the original PAA hydrogels. The hybrid hydrogels exhibit high tensile strengths (0.38–1.73 MPa), elastic moduli (0.21–1.59 MPa) and toughness (up to 3.0 MJ/m³), about several to more than 10 times those of the corresponding PAA hydrogels. In addition, the PAA/PDMDAAC hydrogels also show excellent and very rapid shape recovery ability in both air and deionized water. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 2432–2441     

Effects of pyrolysis temperatures on the textural,magnetic, morphology,and catalytic properties of supported nickel nanoparticles

The development of base metal catalysts for industrially important reactions continues to be an important goal of catalysis research. Herein, the effects of pyrolysis temperature on the textural, structural, surface, magnetics properties and catalytic properties of silica-supported nickel nanoparticles (NiNPs) were thoroughly investigated. Mono-dispersed NiNPs encapsulated in graphitic shells were first successfully obtained and were characterized using a variety of methods such as BET surface area measurement, CO-pulse chemisorption, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), high resolution transmission electron microscopy (HR-TEM), and superconducting quantum interference device (SQUID) measurement. The findings showed that all catalysts’ properties were considerably altered with change in pyrolysis temperature. Hydrogenation of diphenylacetylene was then selected as the model reaction for the evaluation of the catalytic performance of the graphitic-shelled NiNPs. After testing, pyrolysis of a nickel at 800 °C (catalyst A) displayed tremendous activity and selectivity to produce >94% of stilbene with selectivities of 99% for the Z-isomer.     

Effect of gemini surfactant additives on pour point depressant of crude oil

Efficiencies of cationic gemini surfactant additives in improving the pour point depressant of crude oil were investigated. The length of alkyl chain is a major factor affecting the improvement of the pour point depression. The adsorption behavior of these gemini surfactants at air/solution and oil/solution interfaces were investigated by measuring the surface tension and interfacial tension as functions of concentration. It is found that there is a good relation between surface properties especially interfacial tension of the gemini surfactants and their efficiency in depressing the pour point. Also, the surface parameters and free energies of micellization and adsorption confirm the decreasing and improving of pour point depression. Crystallization study in crude oil revealed the relationship between the structure and activity of gemini surfactant additives. It is found that the x-ray diffraction patterns of waxes with additives are remarkably different from those without additives. The mechanism of the depressants action has been suggested according the adsorption of each additive. Adsorption of the additive on the surface of the wax particles inhibits their growth and alters the crystal habits through micelle core. Pretreatment of the crude oil with pour point depressants has received the greatest acceptance due to its simplicity and economy.     

A comparative first-principles study on electronic structures and mechanical properties of ternary intermetallic compounds Al8Cr4Y and Al8Cu4Y: Pressure and tension effects

An investigation into the bulk properties, elastic properties and Debye temperature under pressure, and deformation mode under tension of Al₈Cu₄Y and Al₈Cr₄Y compounds was investigated by using first principles calculations based on density functional theory. The calculated lattice constants for the ternary compounds (Al₈Cu₄Y and Al₈Cr₄Y) are in good agreement with the experimental data. It can be seen from interatomic distances that the bonding between Al1 atom and Cr, Y, and Al2 atoms in Al₈Cr₄Y are stronger than Al₈Cu₄Y. The results of cohesive energy show that Al₈Cr₄Y should be easier to be formed and much stronger chemical bonds than Al₈Cu₄Y. The bulk modulus B, shear modulus G, Young's modulus E and Poisson's ratio ν can be obtained by using the Voigt–Reuss–Hill averaging scheme. From the results of elastic properties, Al₈Cr₄Y has the stronger mechanical behavior than Al₈Cu₄Y. Our calculations also show that pressure has a greater effect on mechanical behavior for both compounds. The ideal tensile strength are obtained by stress-strain relationships under [001](001) uniaxial tensile deformation, which are 15.4 and 23.4 GPa for Al₈Cu₄Y and Al₈Cr₄Y, respectively. The total and partial density of states and electron charge density under uniaxial tensile deformations for Al₈Cu₄Y and Al₈Cr₄Y compounds are also calculated and discussed in this work.     

Accurate integration over atomic regions bounded by zero‐flux surfaces

The approach for the integration over a region covered by zero‐flux surface is described. This approach based on the surface triangulation technique is efficiently realized in a newly developed program TWOE . The elaborated method is tested on several atomic properties including the source function. TWOE results are compared with those produced by using well‐known existing programs. Absolute errors in computed atomic properties are shown to range usually from 10^?6 to 10^?5 au. The demonstrative examples prove that present realization has perfect convergence of atomic properties with increasing size of angular grid and allows to obtain highly accurate data even in the most difficult cases. It is believed that the developed program can be bridgehead that allows to implement atomic partitioning of any desired molecular property with high accuracy. © 2012 Wiley Periodicals, Inc.