溶剂化金属原子浸渍法制备的Ni-Ag/γ-Al2O3催化剂的结构表征

应用溶剂化金属原子浸渍法和普通浸渍法制备了三种不同摩尔比的γ－Ａｌ２Ｏ３负载Ｎｉ－Ａｇ双金属催化剂。ＸＲＤ和磁测定结果表明ＳＭＡＩ催化剂中Ｎｉ和Ａｇ的粒度均小于金属相同的ＣＩ催化剂。ＳＭＡＩ催化剂中Ｎｉ和Ａｇ未形成合金，而ＣＩ催化剂中Ｎｉ和Ａｇ形成了合金。     

氧弹分解-原子荧光法测定煤中汞的研究进展

介绍氧弹分解-原子荧光法测定煤中汞含量的研究进展。影响该方法主要因素为称样量、氧气浓度、吸收剂、还原剂、煤种以及灰分含量。分别综述了各个因素对该方法的影响,可为相关标准的制定提供参考。该方法能够简单、经济、快速地测定煤中汞的含量,但是目前学者们对于该方法的相关研究还存在分歧,需要进一步的研究验证;同时,还需要注意以下几个研究方向:吸收剂和还原剂的选择对汞回收率的影响;吸收剂在密闭氧弹中对汞的回收率及吸收时间的研究;氧弹废气中汞含量的测定;煤种和灰分含量对汞含量测定的影响。     

镓(Ⅲ)-茜素氨羧络合剂在碳糊电极上的阳极吸附伏安法研究及应用

研究了镓(Ⅲ)-茜素氨羧络合剂(ALC)在碳糊电极上的阳极吸附伏安行为,并以此建立了一种高灵敏度、高选择性测定镓的吸附伏安法.在0.12 mol/L HAc-NaAc-0.24 mol/L邻苯二甲酸氢钾底液(pH 4.5)中,-0.10 V (vs.SCE) 富集90 s (或180 s),以250 mV/s扫速线性扫描至0.90 V, Ga3+-ALC在碳糊电极上产生灵敏的与ALC的峰电位相差近230 mV的吸附氧化峰,其二次导数峰电流与镓浓度在5.0×10-10～8.0×10-7 mol/L范围内呈线性关系;富集240 s检出限达3.0×10-10 mol/L(S/N=3).探讨了电极反应机理.该法用于粮食样品中镓的测定,结果满意.     

微生物法分析天然抗氧化剂性能

建立了微生物抑菌活性纸片试验法，对葛根黄酮、诃子提取物、丹皮酚、竹叶黄酮等4种天然抗氧化剂的抗氧化性能进行了研究。竹叶黄酮、诃子、葛根具有较强的抗单线态氧能力，而丹皮酚抗单线态氧的能力较差。在不同的氧化还原微环境下，天然抗氧化剂可能表现出抗氧化能力，亦可能表现出促氧化能力，二者有着不同的反应机理。微生物抑菌活性纸片法可作为研究较复杂生物环境中抗氧化剂性能的一种简便方法。     

取代肉桂酰甘氨酸酯的合成

在N-甲基吡咯烷酮(NMP)促进下,取代肉桂酸(1a^1g)与二氯亚砜(SOCl2)在20℃酰氯化反应0.5 h,再加入甘氨酸乙酯盐酸盐,在40℃下酰胺化反应4 h,n(取代肉桂酸)/n(SOCl2)/n(甘氨酸乙酯盐酸盐)=1.0/1.2/1.4,合成了一系列取代肉桂酰甘氨酸乙酯(2a^2g),其结构经1H NMR、13C NMR、IR和MS(EI)确证。并探讨了NMP促进取代肉桂酰甘氨酸乙酯反应可能的机理。     

微波辅助快速制备2D/1D ZnIn2S4/TiO2 S型异质结及其光催化制氢性能

The threat and global concern of energy crises have significantly increased over the last two decades. Because solar light and water are abundant on earth, photocatalytic hydrogen evolution through water splitting has been considered as a promising route to produce green energy. Therefore, semiconductor photocatalysts play a key role in transforming sunlight and water to hydrogen energy. To date, various photocatalysts have been studied. Among them, TiO₂ has been extensively investigated because of its non-toxicity, high chemical stability, controllable morphology, and high photocatalytic activity. In particular, 1D TiO₂ nanofibers (NFs) have attracted increasing attention as effective photocatalysts because of their unique 1D electron transfer pathway, high adsorption capacity, and high photoinduced electron–hole pair transfer capability. However, TiO₂ NFs are considered as an inefficient photocatalyst for the hydrogen evolution reaction (HER) because of their disadvantages such as a large band gap (~3.2 eV) and fast recombination of photoinduced electron–hole pairs. Therefore, the development of a high-performance TiO₂ NF photocatalyst is required for efficient solar light conversion. In recent years, several strategies have been explored to improve the photocatalytic activity of TiO₂ NFs, including coupling with narrow-bandgap semiconductors (such as ZnIn₂S₄). Recently, microwave (MW)-assisted synthesis has been considered as an important strategy for the preparation of photocatalyst semiconductors because of its low cost, environment-friendliness, simplicity, and high reaction rate. Herein, to overcome the above-mentioned limiting properties of TiO₂ NFs, we report a 2D/1D ZnIn₂S₄/TiO₂ S-scheme heterojunction synthesized through a microwave (MW)-assisted process. Herein, the 2D/1D ZnIn₂S₄/TiO₂ S-scheme heterojunction was constructed rapidly by using in situ 2D ZnIn₂S₄nanosheets decorated on 1D TiO₂ NFs. The loading of ZnIn₂S₄ nanoplates on the TiO₂ NFs could be easily controlled by adjusting the molar ratios of ZnIn₂S₄ precursors to TiO₂ NFs. The photocatalytic activity of the as-prepared samples for water splitting under simulated solar light irradiation was assessed. The experimental results showed that the photocatalytic performance of the ZnIn₂S₄/TiO₂ composites was significantly improved, and the obtained ZnIn₂S₄/TiO₂ composites showed increased optical absorption. Under optimal conditions, the highest HER rate of the ZT-0.5 (molar ratio of ZnIn₂S₄/TiO₂= 0.5) sample was 8774 μmol·g^-1·h^-1, which is considerably higher than those of pure TiO₂ NFs (3312 μmol·g^-1·h^-1) and ZnIn₂S₄nanoplates (3114 μmol·g^-1·h^-1) by factors of 2.7 and 2.8, respectively. Based on the experimental data and Mott-Schottky analysis, a possible mechanism for the formation of the S-scheme heterojunction between ZnIn₂S₄ and TiO₂ was proposed to interpret the enhanced HER activity of the ZnIn₂S₄/TiO₂heterojunctionphotocatalysts.      

溶胶-凝胶法制备还原态K-Co-Mo催化剂的合成醇性能

应用溶胶-凝胶法制备了还原态K-Co-Mo催化剂, 比较了不同的组分和不同的反应条件对合成醇性能的影响。实验结果表明，适量钾和钴助剂的添加能显著提高催化剂合成醇的性能，尤其是提高了C2+醇的选择性。此外，反应温度、压力以及空速对合成醇影响明显，升高温度可以提高催化反应中低碳醇的收率，但选择性下降；增加压力和空速可以提高低碳醇的收率和选择性，对合成低碳醇有利。在230 ℃，6.0 MPa，14 400 h－1条件下，催化剂合成低碳醇的收率为375.4 g/kg·h，选择性为70.2%，C1OH/C2+OH为0.48。     

表面活性剂增敏2.5次微分极谱测定香豆素

拟定了表面活性剂增敏、2 .5次微分极谱测定香豆素的方法。在含 6.0× 10 -6 mol·L-13 氯 2 羟丙基 三甲基氯化铵的 0 .1mol·L-1KH2 PO4 Na2 HPO4 (pH 6.8)缓冲液中 ,香豆素还原波 [峰电位Ep=- 1.60V(vs .SCE) ]的 2 .5次微分极谱峰峰电流e″p 与其浓度在 4 .0× 10 -7～ 6.0× 10 -5mol·L-1范围内呈良好线性关系 (r =0 .9998,n =10 ) ,检出限为 1.2× 10 -7mol·L-1。 13次平行测量 8.0× 10 -6 mol·L-1香豆素的峰电流 ,RSD为 1.5 %。该方法可用于中药白芷中香豆素的直接测定     

锡—邻菲咯啉络合物吸附极谱波的研究及应用

研究了锡－邻菲咯啉体系的极谱行为，在ｐＨ＝２．５０的０．１０ｍｏｌ／Ｌ氯乙酸－氯乙酸钠介质中，在单扫描极谱上，Ｓｎ－邻菲咯啉络合物于－０．４１Ｖ电位处产生一良好的吸附还原波。波高与Ｓｎ的浓度在２．０×１０＾－８－４．０×１０＾－６ｍｏｌ／Ｌ范围内呈线性关系；检出限为１．０×１０＾－８ｍｏｌ／Ｌ Ｓｎ，对合金标样中的锡进行测定，取得了满意的结果。     

3—（p—甲苯基）磺酰氨基—2，6—哌啶二酮（C12H14O4N2S）的晶体结构和分子

采用X－射线单晶衍射和INDO量子化学计算法研究了标题化合物的晶体和分子结构，标题化合物的分子式C12H14O4N2S，Mr=282.31，三斜晶系，空间群P1，a=7.229(2),b=8.7922(9),c=11.242(1)A;A=70.339(8),β＝71。15（2），γ＝87．88（2）°，V=634.8(7)A^3,Z=2,Dc=1.476g/cm^3,R=0.037,Rw=0.037(W=1),分子的哌啶二酮环中C＝0和C－N键与多肽分子和相应键长相一致，根据INDO计算结果讨论了标题化合物的水解反应活性。