CTBN-TOUGHENED EPOXY RESINS——EFFECT OF CURING MECHANISM ON NETWORK STRUCTURE OF THE RUBBER PHASE

Epoxy resins toughened with carboxyl-terminated butadieneacrylonitrile copolymers (CTBN) are two-phase thermosets. The network of the in situ formed rubber particles depends upon the curing mechanism of the resin. When a primary polyamine such as triethylene tetramine was used as curing agent, the network of the rubber phase was quite incomplete, whereas a perfect rubber network was formed with 2-ethyl-4-methyl imidazole as the curing agent.     

REDUCTION OF C=C DOUBLE BOND WITH BOROHYDRIDE EXCHANGE RESIN-TRANSITION METAL COMPOUND SYSTEMS

Borohydride exchange resin-transition metal(Co,Ni,Cu,)compoundsystems reduced C=C double to C-C single bond in ethanol.     

酚醛型吸附树脂对水体系中吡啶和N,N-二甲基苯胺的吸附性能研究

研究了酚醛型吸附树脂在水体系中对吡啶和N，N-二甲基苯胺的静态和动态吸附行为．结果表明，在水中树脂对吡啶和N，N-二甲基苯胺的吸附主要以疏水吸附机理进行；吸附吡啶和N．N-二甲基苯胺的初始阶段，即达到38．3～48．9％平衡吸附时，吸附速率数据和半经验速率方程很吻合：酚醛型吸附树脂等温吸附吡啶和N，N-二甲基苯胺的平衡吸附数据符合Langmuir方程，相关系数在0．99以上，酚醛型吸附树脂吸附吡啶和N，N-二甲基苯胺属单分子层吸附：用80％的乙醇溶液作洗脱剂来洗脱吸附吡啶已达饱和的JDW-2树脂，效果是很理想的．在3．6个床体积内洗脱率达91．52％，4．8个床体积内洗脱率达到94．85％。表明酚醛型吸附树脂具有优良的洗脱性能．     

一种主链含非线性光学活性基团聚合物的合成

把非线性光学(NLO)发色基团引入到聚合物主链中,既可以增大聚合物中NLO基团的含量,从而提高聚合物的宏观NLO系数,又能够提高NLO聚合物的极化稳定性。本文报道一种由酚酞环氧树脂(PPh)与对硝基苯胺(NA)得到的NLO聚合物的合成及其极化松弛。 所用酚酞环氧树脂系自制,环氧值0.427。对硝基苯胺北京化工厂产,分析纯。N,N-二甲基甲酰胺为中国医药公司售品,化学纯,用前减压蒸馏精制,乙醇、丙酮均为北京化工厂生产,分析纯。在氮气保护下将等当量的PPh与NA溶于DMF中于150℃反应6～8小时后,倒     

Synthesis and characterization of new thermally stable copoly(ester–amide)s from diester–dicarboxylic acids

Three new aromatic diester–dicarboxylic acids containing furan rings, namely, benzofuro[2,3-b]benzofuran-2,9-dicarboxyl-bis-phenyl ester-4,4^′-dicarboxylic acid, benzofuro[2,3-b]benzofuran-2,9-dicarboxyl-bis-phenyl ester-3,3^′-dicarboxylic acid and benzofuro[2,3-b]benzofuran-2,9-dicarboxyl-bis-naphthyl ester-2,2^′-dicarboxylic acid were synthesized by the reaction of benzofuro[2,3-b]benzofuran-2,9-dicarbonyl chloride with 4-hydroxybenzoic acid, 3-hydroxybenzoic acid and 3-hydroxy-naphthalene-2-carboxylic acid, respectively. Diester–dicarboxylic acids were characterized by FT-IR and NMR spectroscopy and elemental analyses. Then, these monomers were converted to aromatic copoly(ester–amide)s by their reaction with various aromatic diamines via the direct polycondensation. These polymers were characterized by viscosity measurements, solubility tests, FT-IR, Ultraviolet and ¹H-NMR spectroscopy and thermogravimetry. The polymers with inherent viscosities in the range of 0.16–0.37 dl/g in dimethyl sulfoxide at 30 °C were obtained in high yield. Most of them dissolved readily at room temperature in polar solvents. The synthesized copoly(ester–amide)s possessed glass-transition temperatures from 210–255 °C. The copoly(ester–amide)s exhibited excellent thermal stabilities and had 10% weight loss at temperature above 295 °C under nitrogen atmosphere.     

Synthesis of carbamoylformhydroxymoyl chlorides and study of their reactivities

Carbamoylformhydroxymoyl chlorides were synthesized by the reactions of carbamoylformamide oximes with sodium nitrite in the presence of hydrochloric acid, and their reactivities were examined.     

化学光谱法测定5N氧化钆中14个稀土杂质元素

报道了化学光谱法测定５Ｎ高纯氧化钆中１４个稀土杂质元素，在Ｐ５０７萃淋树脂色层柱上分离氧化钆中稀土杂质元素，分别采用定量分离Ｌａ－Ｓｍ及Ｔｂ－Ｌｕ＋Ｙ和部份分离Ｅｕ的方法，并相应地采用碳粉吸附法和碳粉粉末法进行光谱测定。分离时间为３．５ｈ，测定下限为１．２μｇ／ｇ（ＲＥ）。     

树脂吸附法处理水杨酸甲酯生产废水的研究

采用吸附树脂NDA—99处理水杨酸甲酯生产废水，结果表明该树脂时废水中的5磺基水杨酸及水杨酸均具有良好的吸附—脱附性能．废水经预处理和吸附处理后，CODCr由57000-59000mg／L降至6300mg／L左右，去除率接近89％．用IBV8％NaOH 3BVH2O作脱附剂，在温度为60℃、流量为IBV／h的条件下，脱附率接近100％，树脂可重复使用．高浓度脱附液经酸化、浓缩、冷却结晶，可回收5—磺基水杨酸，回收率为95％左右。纯度为78％。     

Multifunctional Calix[4]arenes Containing Pendant Amide and Phosphoryl Groups: Their Use as Extracting Agents and Carriers for Alkali Cations

The complexing, extracting and mobile carrier properties of the tetra(phosphine oxide)-calix[4]arene 1 and the hybrid diamide-di(phosphine oxide)-calix[4]arene 2 were studied. Both ligands give 1 : 1 complexes with alkali cations in THF as shown by the picrate method. 1H NMR experiments were run to follow encapsulation of sodium and potassium cations. The corresponding spectra indicate C2-symmetrical structure. The observed extraction orders of the alkali picrates were as follows K+>Rb+>Li+>Cs+>Na+ for 1 and Li+>Na+>K+>Rb++ for 2. Transport kinetics was analysed by means of a model which assumes pure diffusion and which allows the evaluation of mass transfer coefficients in all systems. These coefficients and their influences on the transport rate are discussed in terms of size of the transporting species in the liquid membrane.