Direct synthesis of Poly(Ԑ-Caprolactone)-block-poly (glycidyl methacrylate) copolymer and its usage as a potential nano micelles carrier for hydrophobic drugs

Ring-opening (ROP) and enzymatic copolymerization (ECP) are among the most widely used approaches for synthesizing copolymers of polycaprolactone (PCL). It involves multiple-step reactions and the utilization of enzymes that make the process a lot more complicated, time consuming, and expensive. Atom transfer radical polymerization (ATRP) has been adopted to synthesize a novel amphiphilic copolymer in our study. The study presents a method to eliminate the ROP/ECP multiple steps in monomer polymerization thus making the process simpler and smoother. The synthesis of cationic polymer micelles copolymer of PCL-PGMA (polycaprolactone grafted poly glycidyl methacrylate) was carried out using direct functionalization of hydroxy group in crude PCL to achieve a higher degree of functionalization, i.e., 12.8% for macroinitiator. FTIR and ¹H-NMR confirmed the successful synthesis of the copolymer with better control over the molecular weight with a PDI (1.84). DSC and XRD results showed the reduction of crystallinity by 86.81%, making copolymer more compatible for drug delivery application. The synthesized copolymer was further converted to nano-micelles drug carrier having an average size of 96.08 ± 21.22 nm. The drug encapsulation efficiency achieved was 60.0 ± 1.7%, and nano-micelles rendered a slow and controlled release of naproxen with long-term storage stability.     

Surface segregation of polypeptide-based block copolymer micelles: An approach to engineer nanostructured and stimuli responsive surfaces

We describe the surface segregation of polypeptide-based block copolymer micelles to produce stimuli-responsive nanostructures at the polymer blend/air interface. Such structures were obtained by simultaneous surface migration and self assembly at the surface of diblock copolymer/homopolymer blends. We employed blends composed of homopolymer (PS) and an amphiphilic block copolymer polystyrene-b-poly(l-glutamic acid) (PS-b-PGA). The surface was functionalized based on the preferential segregation to the polymer blend/air interface of the hydrophilic PGA block of the diblock copolymer upon annealing to water vapor. The surface migration of the diblock copolymer to the interface was demonstrated both by XPS and contact angle measurements. As a consequence, the PGA interfacial attraction leads to a large surface excess on diblock copolymer which in turn, through macrophase and microphase separation, produced separated domains at the surface with regions composed either of homo or block copolymer. Herein we demonstrate that the use of asymmetric diblock copolymers with a higher content in PS lead to spherical micellar assemblies randomly distributed at the surface. As observed by AFM imaging the blend composition, i.e. the amount of block copolymer within the blend influences the density of micelles at the surface. Finally, when exposed to water, the pH affects the surface morphology. The PGA segments are collapsed at low pH values and extended at pH values above 4.8, thus inducing variations on the topography of the films at the nanometer scale.     

Comportement tensioactif des copolymères amphiphiles a séquence hydrophile polyélectrolyte

Résumé La courbe représentant, en fonction de la concentrationc, la tension interfaciale entre le toluène et une solution aqueuse d'un copolymère á blocs amphiphile á séquence hydrophile polyélectrolyte (polystyrène-b-polyvinyl-2-pyridine quaternisée au bromure d'éthyle) est foncièrement différente de celle que l'on obtient avec les détergents classiques.Les longues séquences polyélectrolytes ancrées á l'interface y établissent entre les deux phases une différence de potentiel électrique bien supérieure á celle que l'on obtient avec les détergents classiques. Il en résulte que le système reste éloigné de l'équilibre thermodynamique. Comme les énergies d'activation des processus d'adsorption et de désorption sont de nature différente, les courbes (,c) etablies en concentration croissante et décroissante sont non seulement distinctes, mais de caractères différents.

---

Summary Plotting the water toluene interface tension against the concentrationc, one gets quite different behaviours using classical detergents (Sodium laurylsulfate) or ampholytic block copolymers with polyelectrolytic hydrophilic sequence. (polystyrene-b-polyvinyl-2-pyridine quaternized with ethylbromid).These polyelectrolytic sequences build at the interface a much larger electric potential drop than usual detergents do. It follows that the system keeps far away from the thermodynamic equilibrium. Since adsorption and desorption processes have activation energies of different natures, it turns out that the (,c) curves are quite different in characters if constructed in growing or fallingc values.

---

Zusammenfassung Kurven, welche die Wasser-Toluol-Grenzflächenspannung als Funktion der Konzentrationc wiedergeben, sind für gewöhnliche Tenside und für Ampholytblock-Copolymere mit einer polyelektrolytartigen Sequenz, völlig verschiedenDie polyelektrolytartige Sequenz bildet an der Grenzfläche einen weitaus größeren elektrischen Potentialsprung als gewöhnliche Tenside. Daraus folgt, daß man dem thermodynamischen Gleichgewicht fern bleibt, und, da Ad- und Desorptionsprozesse unterschiedliche Aktivationsenergien besitzen, sind die (,c) Kurven mit steigenden und fallendenc-Werten völlig verschieden.

     

Close-packed monolayers of charged Janus-type nanoparticles at the air-water interface

Two DNA-block copolymers, poly(caprolactone)-DNA and poly(methyl metacrylate)-DNA, were synthesized by conjugation of a short single strand of DNA (12 or 22 mer) to a single reactive group at one end of the synthetic polymer. These polymers self-assemble in water, without the need of any cosolvent, forming micelle-like aggregates that were imaged by TEM. The solution behavior of the bioconjugated polymers was investigated by surface tension measurements. In the direction of dilution, the surface tension was measured using a down-scaled Wilhelmy plate method. To proceed in the reverse direction (concentration), we measured the surface tension of a sessile drop during its evaporation. This latter method was firstly validated using ionic and non-ionic surfactants, including polymeric surfactants. It was then applied to investigate the unimer to micelles transition of the DNA-block copolymers. In all cases, a reversible transition was observed demonstrating the existence of a critical micellar concentration, close to 0.01 mmol L⁻¹ for all the conjugates. The CMC was only slightly influenced by the length of the hydrophilic DNA block.     

Poly(ethylene oxide)-poly(styrene oxide)-poly(ethylene oxide) copolymers: Micellization, drug solubilization, and gelling features

Two new poly(ethylene oxide)-poly(styrene oxide) triblock copolymers (PEO-PSO-PEO) with optimized block lengths selected on the basis of previous studies were synthesized with the aim of achieving a maximal solubilization ability and a suitable sustained release, while keeping very low material expense and excellent aqueous copolymer solubility. The self-assembling and gelling properties of these copolymers were characterized by means of light scattering, fluorescence spectroscopy, transmission electron microscopy, and rheometry. Both copolymers formed spherical micelles (12-14 nm) at very low concentrations. At larger concentration (>25 wt%), copolymer solutions showed a rich phase behavior, with the appearance of two types of rheologically active (more viscous) fluids and of physical gels depending on solution temperature and concentration. The copolymer behaved notably different despite their relatively similar block lengths. The ability of the polymeric micellar solutions to solubilize the antifungal drug griseofulvin was evaluated and compared to that reported for other structurally-related block copolymers. Drug solubilization values up to 55 mg g⁻¹ were achieved, which are greater than those obtained by previously analyzed poly(ethylene oxide)-poly(styrene oxide), poly(ethylene oxide)-poly(butylene oxide), and poly(ethylene oxide)-poly(propylene oxide) block copolymers. The results indicate that the selected SO/EO ratio and copolymer block lengths were optimal for simultaneously achieving low critical micelle concentrations (cmc) values and large drug encapsulation ability. The amount of drug released from the polymeric micelles was larger at pH 7.4 than at acidic conditions, although still sustained over 1 day.     

Colloidal micelles of block copolymers as nanoreactors,templates for gold nanoparticles,and vehicles for biomedical applications

Target drug delivery methodology is becoming increasingly important to overcome the shortcomings of conventional drug delivery absorption method. It improves the action time with uniform distribution and poses minimum side effects, but is usually difficult to design to achieve the desire results. Economically favorable, environment friendly, multifunctional, and easy to design, hybrid nanomaterials have demonstrated their enormous potential as target drug delivery vehicles. A combination of both micelles and nanoparticles makes them fine target delivery vehicles in a variety of biological applications where precision is primarily required to achieve the desired results as in the case of cytotoxicity of cancer cells, chemotherapy, and computed tomography guided radiation therapy.     

Block copolymers at interfaces: Interactions with physiological media

Triblock copolymers (also known as Pluronics or poloxamers) are biocompatible molecules composed of hydrophobic and hydrophilic blocks with different lengths. They have received much attention recently owing to their applicability for targeted delivery of hydrophobic compounds. Their unique molecular structure facilitates the formation of dynamic aggregates which are able to transport lipid soluble compounds. However, these structures can be unstable and tend to solubilize within the blood stream. The use of nanoemulsions as carriers for the lipid soluble compounds appears as a new alternative with improved protection against physiological media. The interfacial behavior of block copolymers is directly related to their peculiar molecular structure and further knowledge could provide a rational use in the design of poloxamer-stabilized nanoemulsions. This review aims to combine the new insights gained recently into the interfacial properties of block copolymers and their performance in nanoemulsions. Direct studies dealing with the interactions with physiological media are also reviewed in order to address issues relating metabolism degradation profiles. A better understanding of the physico-chemical and interfacial properties of block copolymers will allow their manipulation to modulate lipolysis, hence allowing the rational design of nanocarriers with efficient controlled release.