数显温控精确测量金属丝的温度系数

在传统金属导体温度系数测量中对于金属丝的加热通常采用了水浴加热法或油浸加热法。这两种方法存在着短路、产生不良气体污染、温度测量不精确等缺点。首次使用了数显温度可控的功率电阻作为金属丝的加热源,在测量中采用了双臂电桥、金属丝的四端电阻接线方式,不仅实现了金属丝的温度可控性和实时测量性,而且将测量精度提高到3%以内。     

Computation of moisture and temperature profiles in soil—The coupled model

The coupled model has been developed in this study for moisture transport and beat exchange in soil. The model is driven by atmospheric conditions measured in a field. The concept that soil has a surface resistance to evaporation is introduced in order to relate the evaporation from surface with the vapour flux in air. With the use of this concept, the simulation results agree quite well with the measured data.     

喷丝头组合花板的真空熔炼

化纤生产行业的粘胶，经过装在组合花板上的喷丝头在酸浴里形成化学纤维。粘胶为碱性物质，酸浴的化学成份为稀硫酸、磷酸，酸浴温度为57℃左右，组合花板内压力为10kg／cm^2，要求组合花板材料在有足够的强度下，具有高耐腐蚀性能。     

Matrix assisted pulsed laser evaporation processing of triacetate-pullulan polysaccharide thin films for drug delivery systems

We report the first successful deposition of triacetate-pullulan polysaccharide thin films by matrix assisted pulsed laser evaporation. We used a KrF* excimer laser source (λ = 248 nm, τ ≈ 20 ns) operated at a repetition rate of 10 Hz. We demonstrated by FTIR that our thin films are composed of triacetate-pullulan maintaining its chemical structure and functionality. The dependence on incident laser fluence of the induced surface morphology is analysed.     

电阻温度系数的微机测定系统

本文介绍一种电阻温度系数微机测定实验的系统。     

气密性碳涂覆光纤筛选强度与电阻关系研究

通过实验分析确立了把光纤电阻作为衡量气密性碳涂覆光纤通过２％应变筛选的过渡标准。要拉制２％应变筛选的碳涂覆光纤，其电阻值应小于３０ｋΩ／ｃｍ。     

1．5GHz锯材超导腔的研制

介绍铌材超导腔的研制进展，重点讨论了国产铌腔的材料改性，以及相应的超导腔性能的改进．叙述了１．５ＧＨｚ铌腔的腔形设计，分析了铌材的射频性能和机械性能，制定了铌腔制作与后处理的特定工艺．最后给出了１．５ＧＨｚ铌材超导腔的低温实验结果．     

An evolutionary method for optimization of plate buckling resistance

Optimization of plate buckling resistance is very complicated, because the in-plane stress resultants in the prebuckled state of a plate are functions of thickness distribution. This paper discusses the problem of finding the optimum thickness distribution of isotropic plate structures, with a given volume and layout, that would maximise the buckling load. A simple numerical method using the finite-element analysis is presented to obtain the optimum thickness distribution. Optimum designs of compression-loaded rectangular plates with different boundary conditions and plate aspect ratios are obtained by using the proposed method. Optimum designs from earlier studies and the methods of buckling analysis used to attain these results are discussed and compared with the designs from the proposed method. This paper also examines the reliability of the optimality criterion generally used for plate buckling optimization, which is based on the uniform strain energy density.     

也谈“用惠斯通电桥测电阻”实验

本文主要对杨介信、陈国英编写《普通物理实验(二、电磁学部分)》“用惠斯通电桥测电阻”实验中δR_(x0)=(R_4/R_3)δR_2的含意等五个问题,提出自己的不同看法。     

用毛细管电泳法对某些药物的分离试验

本文采用毛细管电泳法,以50μm内径,45cm长的弹性石英毛细管作为分离管,选用磷酸盐-硼酸盐-十二烷基硫酸钠缓冲溶液体系,在柱254nm紫外检测器,在不同的电泳电压下,对水溶性维生素,磺胺类药物、头孢菌素抗生素,解热镇痛药物有效成份进行了分析,取得较满意的结果。