Studies on nano suspensions of silver sol and redispersed nanocrystallite silver in aqueous and alcoholic media

Nanocrystallite silver and silver sol were prepared and characterized by UV-visible spectra, XRD, TEM and HRTEM. The crystallite silver is re-dispersed in two different media, namely, water and alcohol and sonicated before ultrasonic investigation. The silver sol was used as such. Three different models for the propagation of ultrasound through two phase media are compared in these three different types of nano suspensions. Effect of particle size and medium on ultrasonic velocity (U), compressibility (κ) impedance (Z) and viscous relaxation time (τ) is studied. The particle concentration range was 0.2-1 v/v. Density and viscosity of the dispersion and sol are measured at different particle volume fractions. Effective density and ultrasonic velocity are computed by Urick, Kuster and Toksöz and Urick and Ament models and compared with experimental velocities. Values of effective density obtained by using Urick and Urick and Ament equations closely agree with experimental results of density while Urick's equation prediction of velocity is in close agreement with the experimental velocities. This comes as a surprise in view of the large density difference between the medium and suspended particle and suggests the possibility of the balancing effect of the inertial and viscous forces operating in the suspension.     

Dynamic magnetic hysteresis behavior and dynamic phase transition in the spin-1 Blume-Capel model

The nature (time variation) of response magnetization m(wt) of the spin-1 Blume-Capel model in the presence of a periodically varying external magnetic field h(wt) is studied by employing the effective-field theory (EFT) with correlations as well as the Glauber-type stochastic dynamics. We determine the time variations of m(wt) and h(wt) for various temperatures, and investigate the dynamic magnetic hysteresis behavior. We also investigate the temperature dependence of the dynamic magnetization, hysteresis loop area and correlation near the transition point in order to characterize the nature (first- or second-order) of the dynamic transitions as well as obtain the dynamic phase transition temperatures. The hysteresis loops are obtained for different reduced temperatures and we find that the areas of the loops are decreasing with the increasing of the reduced temperatures. We also present the dynamic phase diagrams and compare the results of the EFT with the results of the dynamic mean-field approximation. The phase diagrams exhibit many dynamic critical points, such as tricritical (•), zero-temperature critical (Z), triple (TP) and multicritical (A) points. According to values of Hamiltonian parameters, besides the paramagnetic (P), ferromagnetic (F) fundamental phases, one coexistence or mixed phase region, (F+P) and the reentrant behavior exist in the system. The results are in good agreement with some experimental and theoretical results.     

Radiation shielding effectiveness with correlated uncertainties

The space radiation environment is composed of energetic particles which can deliver harmful doses of radiation that may lead to acute radiation sickness, cancer, and even death for insufficiently shielded crew members. Spacecraft shielding must provide structural integrity and minimize the risk associated with radiation exposure. The risk of radiation exposure induced death (REID) is a measure of the risk of dying from cancer induced by radiation exposure. Uncertainties in the risk projection model, quality factor, and spectral fluence are folded into the calculation of the REID by sampling from probability distribution functions. Consequently, determining optimal shielding materials that reduce the REID in a statistically significant manner has been found to be difficult. In this work, the difference of the REID distributions for different materials is used to study the effect of composition on shielding effectiveness. It is shown that the use of correlated uncertainties allows for the determination of statistically significant differences between materials despite the large uncertainties in the quality factor. This is in contrast to previous methods where uncertainties have been generally treated as uncorrelated. It is concluded that the use of correlated quality factor uncertainties greatly reduces the uncertainty in the assessment of shielding effectiveness for the mitigation of radiation exposure.     

Fractal surface for calibration of an optical profiler

The surface profiler has become a basic metrology tool for the characterization of high-quality optical surfaces. The unknown effective resolution of the surface profiler is problematic in using the instrument, as it distorts the measured surface profile. In this paper, we suggest and describe the use of a fractal surface as a standard test surface with which to calibrate the effective resolution of a surface profiler. Fractal surfaces have the characteristics of irregularity, self-similarity and low correlation, with the correlation length being approximately equal to the length of the profile; therefore, a log-log plot of the power spectral density curve is a straight line. The power spectral density curves of fractal surfaces, which can be acquired through surface characterization techniques such as atomic force microscopy, are fitted to a straight line to act as a standard with which to calibrate an optical profiler in different ranges. Through calibration, we can obtain the effective resolution of the optical profiler, and the surface profiler is found to have good transmission capacity within the effective spatial frequency range.     

Evaluation of aortic stenosis severity using 4D flow jet shear layer detection for the measurement of valve effective orifice area

Aims

The objective of this study was to evaluate the potential of 4D flow MRI to assess valve effective orifice area (EOA) in patients with aortic stenosis as determined by the jet shear layer detection (JSLD) method.

Methods and Results

An in-vitro stenosis phantom was used for validation and in-vivo imaging was performed in 10 healthy controls and 40 patients with aortic stenosis. EOA was calculated by the JSLD method using standard 2D phase contrast MRI (PC-MRI) and 4D flow MRI measurements (EOA_JSLD-2D and EOA_JSLD-4D, respectively). As a reference standard, the continuity equation was used to calculate EOA (EOA_CE) with the 2D PC-MRI velocity field and compared to the EOA_JSLD measurements. The in-vitro results exhibited excellent agreement between flow theory (EOA = 0.78 cm²) and experimental measurement (EOA_JSLD-4D = 0.78 ± 0.01 cm²) for peak velocities ranging from 0.9 to 3.7 m/s. In-vivo results showed good correlation and agreement between EOA_JSLD-2D and EOA_CE (r = 0.91, p < 0.001; bias: − 0.01 ± 0.38 cm²; agreement limits: 0.75 to − 0.77 cm²), and between EOA_JSLD-4D and EOA_CE (r = 0.95, p < 0.001; bias: − 0.09 ± 0.26 cm²; limits: 0.43 to − 0.62 cm²).

Conclusion

This study demonstrates the feasibility of measuring EOA_JSLD using 4D flow MRI. The technique allows for optimization of the EOA measurement position by visualizing the 3D vena contracta, and avoids potential sources of EOA_CE measurement variability.     

Auxiliary field loop expansion of the effective action for a class of stochastic partial differential equations

We present an alternative to the perturbative (in coupling constant) diagrammatic approach for studying stochastic dynamics of a class of reaction diffusion systems. Our approach is based on an auxiliary field loop expansion for the path integral representation for the generating functional of the noise induced correlation functions of the fields describing these systems. The systems we consider include Langevin systems describable by the set of self interacting classical fields ?_i(x,t)${?}_i(x,t)$ in the presence of external noise η_i(x,t)${\eta }_i(x,t)$, namely (∂_t−ν∇²)?−F[?]=η$({\partial }_t-\nu {\nabla }^2)?-F\left[?\right]=\eta$, as well as chemical reaction annihilation processes obtained by applying the many-body approach of Doi–Peliti to the Master Equation formulation of these problems. We consider two different effective actions, one based on the Onsager–Machlup (OM) approach, and the other due to Janssen–deGenneris based on the Martin–Siggia–Rose (MSR) response function approach. For the simple models we consider, we determine an analytic expression for the Energy landscape (effective potential) in both formalisms and show how to obtain the more physical effective potential of the Onsager–Machlup approach from the MSR effective potential in leading order in the auxiliary field loop expansion. For the KPZ equation we find that our approximation, which is non-perturbative and obeys broken symmetry Ward identities, does not lead to the appearance of a fluctuation induced symmetry breakdown. This contradicts the results of earlier studies.     

Remarks on beyond leading order

In recent years a two-scale expansion was established to study reactions of the type NN→NNπ within chiral perturbation theory. Then the diagrams of some subclasses that are invariant under the choice of the pion field no longer appear at the same chiral order. In this Letter we show that the proposed expansion still leads to well defined results. We also discuss the appropriate choice of the heavy baryon propagator.     

连续级联喇曼光纤激光器耦合波方程的修正

从最基本的耦合波方程出发,考虑光波正反向传输的情况下,推导出了一个全面的、准确的关于连续级联喇曼光纤激光器的理论模型,描述了各级Stokes光波功率沿光纤长度的变化.指出了相关一些文献中存在的不足,并且给出了多级斯托克斯光波相互作用的有效作用面积的表达式.此模型有助于喇曼光纤激光器的设计.     

聚合物及其混合物的太赫兹介电性质测定与分析方法

聚合物材料因其对太赫兹波的高透过率以及良好的塑形能力在太赫兹研究中扮演了重要的角色,由于材料的介电特性直接关系着折射率、极化率等重要性质,不同的应用场合通常需要材料呈现出特殊的太赫兹介电响应,一方面可以选取不同的聚合物材料,另一方面可以通过多种聚合物的混合实现材料介电性质的调制。聚合物材料合理的选取和设计建立在材料太赫兹介电精确表征之上,然而利用太赫兹时域光谱系统(THz-TDS)对聚合物材料进行透射式太赫兹介电表征时,材料内部空气孔隙的存在会影响表征结果的复现性,同时也会影响共混聚合物介电性质的分析和预测。因此以Landau, Lifshitz, Looyenga(LLL)模型为基础提出了考虑空气影响的介电分析模型,并选取了在太赫兹研究中广泛使用的聚合物材料聚乙烯(PE)和聚四氟乙烯(PTFE)对模型的有效性和稳定性加以验证,展开了两种材料单质和混合物两方面的介电分析。在太赫兹波透射样品之后的相位变化信息中提取出样品的介电常数,同一种物质制备的样片间太赫兹介电谱存在明显差异,使用包含气隙影响的LLL模型处理实验数据后,样品介电常数中空气的介电影响被移除,从而得到了两种材料的本征介电常数,在此基础上,使用测得的本征介电常数和混合物样品中两种材料的体积占比信息代入包含气隙影响的LLL模型计算得到了不同配比混合物的太赫兹介电常数的模拟值,并与THz-TDS实验获取的实验值进行了对比。利用所提出的有效介质模型,聚乙烯和聚四氟乙烯在10～40 cm-1波段内移除空气影响后的平均介电常数为2.315±0.003（±0.13%）和2.109±0.003（±0.14%）,在不同重量、不同厚度的单组份样品间模型测定的聚合物介电常数保持了良好的重复性,在对混合物的太赫兹介电性质测定与分析中,利用模型计算的混合物介电常数模拟值与THz-TDS测定的介电常数实验值保持了高度线性相关,其相关系数为0.964 3,全局相对误差为1.08%,体现了模型的可靠性。提出的介电分析模型可以扩展到更多的高分子材料单质及其混合物的太赫兹介电性质表征中,对太赫兹波段的共混聚合物材料设计具有参考价值。     

Behavior of a PZT ring under non-uniform mechanical stress

Ring-shaped lead zirconate titanate (PZT) piezoelectric vibrators were subjected to non-uniform mechanical stress applied by bolt clamping. The effect of mechanical stress on the effective electromechanical coupling factor (k_eff) and mechanical quality factor (Q_m) of the thickness and wall thickness modes was studied by an equivalent electric circuit analysis. The initiation and propagation of cracks under mechanical stress were also discussed based on the resonance method and the indentation technique. k_eff for both the thickness and wall thickness modes decreased with increase in mechanical stress due to de-poling of the PZT. Q_m of the thickness mode dropped sharply with increase in mechanical stress while Q_m of the wall thickness mode remained almost unchange. Existence of microcracks in a PZT vibrator can be detected by the occurrence of spurious vibrations at the wall thickness mode in the electrical impedance vs. frequency spectra.