Validation of an optimization procedure to improve low frequency characteristics of rooms

A set of experiments was carried out to validate an optimization procedure based on finite element method (FEM). The idea of the procedure, fully presented in previous edition of this journal [Zhu X, Zhu Z, Cheng J. Using optimized surface modifications to improve low frequency response in a room. Appl Acoust 2004;65:841-60], is to produce an optimal geometry modification on the wall for improving low frequency sound uniformity in small rooms. Four experimental models were set up with a scale of 1:5. One was modified according to the optimized result and the others were treated with no optimization consideration. Measured frequency responses of four rooms were compared with numerical results calculated by FEM models. The transient responses in these rooms were also measured and analyzed. The agreements between calculation and measurement are satisfactory though the discrepancies due to the uncertainty of acoustic behavior of the room boundaries remain. The optimization procedure has been supported by the results that the optimized room produces the flattest frequency response and also the most smooth energy decay within the frequency range studied. The reductions of response fluctuation have reached 4.3 dB for prediction and 2.6 dB for measurement, respectively.     

高频等离子体化学气相淀积法制备TiO2超细粒子

利用ＴｉＣｌ４＋Ｏ２体系，在高频等离子体化学气相淀积反应器中合成了纯度高、粒度细的ＴｉＯ２粒子。考察了工艺条件对ＴｉＯ２粒子物性的影响；探讨了ＴｉＯ２粒子晶型控制的方法，金红石型质量分数可通过工艺条件控制；探讨了ＴｉＯ２粒子晶型控制的方法。金红石型质量分数可通过工艺条件控制，减少ＴｉＯ２单体浓度可提高金红石型质量分数；也可通过在原料ＴｉＣｌ４中添加ＡｌＣｌ３等晶型转化剂，使可转化为单一金红石型Ｔｉ     

一种短波电台频率合成器的研制

该文介绍一种采用Ｍｏｔｏｒｏｌａ公司ＭＣ１４５１４６和ＭＣ１２０１７／１８蕊片构成的短波电台频率合成器的硬件电路实现方案。频率合成器的输出频率范围２～２９．９９９９ＭＨｚ，频率间隔１００Ｈｚ，换频时间小于０．０１ｓ。文中论述了这种多环数字式频率合成器工作原理，各环路之间对应的频率关系和电路参数的选择，给出了频率合成器的试验结果．     

碗扣式多功能脚手架CO2气体保护自动焊机

采用CO2气体保护焊工艺研制了碗扣式多功能脚手架CO2气体保护自动焊接设备，在零部件尺寸不规范的条件下，利用电、气动机构实现多个工件的同时准确自动装卡及自动焊接，焊缝成形好，质量稳定，提高了生产效率，节约了能源及4／5的劳动力。     

Stability of Markovian structure observed in high frequency foreign exchange data

Contrary to the common sense in economics and financial engineering, price fluctuations at very fine level of motion exhibit various evidences against the efficient market hypothesis. We attempt to investigate this issue by studying extensive amount of foreign currency exchange data for over five years at the finest level of resolution. We specifically focus on the proposed stability in binomial conditional probabilities originally found in much smaller examples of financial time series. In order to handle very large data, we have written an efficient program in C that automatically generates those conditional probabilities. It is found that the stability is maintained for extremely large time duration that covers almost the entire period. Based on the length of conditions for which the conditional probabilities are distinguishable each other, we identify the length of memory being less than 3 movements.     

Measurement of acoustic particle velocities in enclosed sound field: Assessment of two Laser Doppler Velocimetry measuring systems

The performances of two Laser Doppler Velocimetry (LDV) systems adapted for measuring the acoustic particle velocities are assessed in enclosed sound field. This assessment is performed by comparing the acoustic velocities measured by means of LDV to reference acoustic velocities estimated from sound pressure measurements. The two LDV systems are based on a single optical bench which delivers an optical signal called Doppler signal. The Doppler signal, which is frequency modulated, is analyzed by means of two signal processing systems, the BSA (Burst Spectrum Analyser from Dantec) on the one hand, and a system specifically developed for the estimation of the acoustic velocity on the other hand. Once the experimental setup has been optimized for minimizing the errors made on the reference velocities, the assessment is performed and shows that both systems can measure the acoustic velocity in enclosed field in two the frequency ranges [0-4 kHz] and [0-2 kHz] respectively for acoustic velocity amplitudes of 10 mm/s and 1 mm/s.     

原子光谱线变宽的因素分析

分别从经典理论和量子理论的不同角度论述了使原子光谱线变宽的各种主要因素:由于能量的不确定关系导致的自然致宽;多普勒致宽;碰撞致宽;因碰撞过程中原子能级变化而导致的压力致宽、场致宽等.通过分析,阐明了实际光谱线与理想光谱线的不同及其原因.     

重力场与静电场特点的比较

“场”是一种客观存在的物质，但由于“场”具有不易直接感受的特殊存在形态，同学们对“场”的物质性的理解不够深刻，解决“场”的相关问题时也感到棘手．笔者就高中阶段最典型的两种场——“重力场”和“静电场”的力学性质与能量特点进行比较，使同学们对“场”的概念有更深刻的认识．     

机械结构因素对光电跟踪伺服系统性能的影响

为克服机械结构因素对光电跟踪伺服系统性能的不良影响,分析了转动惯量、结构谐振频率、摩擦力矩等伺服机械结构因素与伺服系统性能的关系,包括分析转动惯量与伺服系统性能的关系、结构谐振频率与伺服系统性能的关系、摩擦力矩与伺服系统性能的关系,探讨了消除或减小机械谐振的措施.该分析方法可应用于设计和制造响应速度快、跟踪精度高的光电跟踪伺服系统.     

激光在医学中的应用

激光在医学领域的应用非常广泛，本文主要介绍了激光诊断和激光治疗的几个重要应用。