The parameter determination in the design of 3-D spherically symmetric FIR filters via the McClellan transformation

In the design of 3-D spherically symmetric FIR filters via the McClellan transformation, two methods are proposed to determine the transformation parameters. The first is to improve the original 3-D algorithm by exploiting the 2-D effective methods in 3-D. This method can change the constrained optimization algorithm into the unconstrained one and makes the design easier to realize. The second method is to solve the coupled equations under constrained conditions and a set of ideal parameters can be gotten. The design example shows that the two methods are all efficient and easier than the original algorithm. Supported by the National Natural Science Foundation of China Jin Xiaoying: born in 1975, Graduate student     

逆向技术在卷接机组国产化中的应用

逆向技术是根据已存在的产品或零件原型构造新的产品,并在构造过程中进行剖析、理解和改进,对已有设计进行二次设计.针对卷接机组成型曲面类零件的复杂性,运用逆向技术进行原理分析,成功地对烟枪及刮刀进行了再设计和加工,解决了多种卷接机组中异形曲面零件的国产化问题,并取得了良好的效果.     

变频调速在卷接机组集中风力供给系统中的应用分析

针对卷接机组集中风力供给系统的特点,利用变频调速技术对系统进行恒压负反馈控制,使系统在不同负荷下运行稳定,确保卷接机组正常工作,同时节约能量.     

基于Gabor小波纹理特征的目标识别新方法

给出了一种基于Gabor小波纹理特征的目标识别新方法．主要是利用Gabor小波设计了一种多通道小波滤波器。对图像目标直接进行小波变换，用Gabor小波变换系数的模的平均值和其标准方差来表示抽取的图像目标的特征，把获得的小波特征归一化后输入到改进的BP神经网络分类器进行分类识别．最后。进行了一系列的仿真实验，结果表明，这种特征提取方法能有效提取图像目标纹理特征，并且对噪音和形状的变化具有鲁棒性．在应用于目标识别时，神经网络的训练时间减少到lOmin，识别率达到94％．     

Full-wave modeling of piezoelectric transducers for SAW acousto-optical interactions

In this paper we present an accurate and efficient numerical method for a rigorous full-wave analysis of interdigital transducers (IDT) for the excitation of surface acoustic waves on the piezoelectric substrate of acousto-optical devices. The problem is formulated in terms of an integral equation that is solved by the method of moments. The transducer input admittance and the power coupling factors to both surface and bulk waves are computed. Numerical results for some configurations of X-Y LiNbO₃ IDT for acousto-optic applications are in very good agreement with measured data. It is pointed out that bulk wave excitation may be a serious limitation in the design of efficient, wide band transducers for acousto-optical devices.     

Discrete filter operators for large‐eddy simulation using high‐order spectral difference methods

The combination of a high‐order unstructured spectral difference (SD) spatial discretization scheme with sub‐grid scale (SGS) modeling for large‐eddy simulation is investigated with particular focus on the consistent implementation of a structural mixed model based on the scale similarity hypothesis. The difficult task of deriving a consistent formulation for the discrete filter within the SD element of arbitrary order led to the development of a new class of three‐dimensional constrained discrete filters. The discrete filters satisfy a set of selected criteria and are completely local within the SD element. Their weights can be automatically computed at run time from the number of solution points within each element and the expected filter cutoff length scale. The novel discrete filters can be applied to any SGS model involving explicit filtering and to a broad class of high‐order discontinuous finite element numerical schemes. The code is applied to the computation of turbulent channel flows at three Reynolds numbers, namely Re_τ = 180, 395, and 590 (based on the friction velocity u_τ and channel half‐width δ). Results from computations with and without the SGS model are compared against results from direct numerical simulation. The numerical experiments suggest that the results are sensitive to the use of the SGS model, even when a high‐order numerical scheme is used, especially when the grid resolution is kept relatively low and mostly in terms of resolved Reynolds stresses. Results obtained using existing filters based on the projection of the solution over lower‐order polynomial bases are also shown and demonstrate that these filters are inadequate for SGS modeling purposes, mostly because of their inability to enforce the selected cutoff length scale with sufficient accuracy. The use of the similarity mixed formulation proved to be particularly accurate in reproducing SGS interactions, confirming that its well‐known potential can be realized in conjunction with state‐of‐the‐art high‐order numerical schemes.Copyright © 2012 John Wiley & Sons, Ltd.     

FeSO_4掺杂蒙托石的制备及在烟气吸附上的应用研究

成功地制备出一系列FeSO_4掺杂的蒙托石样品,并对其结构及性能进行表征.在不同后处温度下,样品均保持蒙托石的多孔骨架线结构.N2等温吸附曲线结果进一步表明,在不同后处理温度下,该系列样品均保留了丰富的微孔结构,孔径大小约为3.5 nm.将所改性过的蒙托石样品对卷烟主流烟气成分进行检测,结果表明我们的样品对烟气中大量有害物质(例如苯酚)具有很好的吸附能力.     

Spectral tuning of InGaAs/GaAs quantum dot infrared photodetectors with bandpass guided‐mode resonance filters

Quantum dot infrared photodetectors can be coupled with micro‐structured filters to create narrowband sensors. Guided‐mode resonance filters based on a high‐index dielectric slab can exhibit bandpass characteristics that are suitable for monolithic integration with focal‐plane arrays. Here, patterned Ge filters were integrated with InGaAs/GaAs quantum dot detectors to linearly tune their 77 K photoresponse peaks from 5.6 µm to 6.2 µm. The dark current was not influenced by these filters but the ability to narrow the photoresponse linewidth was limited by substrate scattering, which is often encountered with front‐side illumination architectures. (© 2014 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Tuneable Sagnac comb filter including two wave retarders

In this paper we study theoretically and experimentally a wavelength-tuneable Sagnac birefringence filter. The device is a Sagnac interferometer including a symmetric fibre coupler and a length of high-birefringence fibre in the loop. A wave retarder is inserted at each end of the birefringent fibre for absolute wavelength tuning. We show theoretically that wavelength tuning through wave plate orientation ensuring constant amplitude of the filtering function is possible only if a minimum of two wave retarders are included in the setup. The position of the transmission peaks then varies linearly with the angle of one of the retarders and can be adjusted over one entire channel spacing. This happens only when a quarter-wave retarder and a half-wave retarder are used, if the former is oriented at 45° with respect to the fibre birefringence axes, while the orientation of the latter serves as the adjustment parameter. The theoretical predictions are confirmed by the experimental results.     

Optimization of matrix solid-phase dispersion conditions for UV filters determination in biota samples

A low solvent consumption method for the determination of eight ultraviolet (UV) filters, displaying low to medium polarities, in freeze-dried samples of marine bivalves and fish is proposed. Matrix solid-phase dispersion (MSPD) and gas chromatography with mass spectrometry (GC-MS) were used as sample preparation and determination techniques, respectively. This work describes the influence of several parameters (type and amount of dispersant and clean-up sorbents, as well as elution solvent) on the yield and the selectivity of the MSPD extraction. Under optimized conditions, samples (0.5?g) were ground with 2?g of Florisil in a mortar with a pestle and transferred into a polypropylene syringe, which contained 1?g of C18 as clean-up sorbent. Analytes were eluted with 5?mL of acetonitrile. This extract was concentrated to dryness, re-constituted with 1?mL of ethyl acetate and injected in the GC-MS system without any further clean-up. The global average recoveries, measured for three different biota samples, spiked at three different levels (between 50 and 1000?ng?g^?1), ranged from 80% to 101% with associated standard deviations below 10%. The inter-day precision of the method varied from 4% to 15% and the achieved LOQs (defined for a signal to noise ratio of 10) ranged from 4 to 28?ng?g^?1, referred to the freeze-dried matrix. Octocrylene (OCR) was found in some samples of fish and mussels at concentrations between 15 and 20?ng?g^?1, referred to dry mass.