Differentiating bulk nanobubbles from nanodroplets and nanoparticles

History has shown that it is not as easy as one might think to differentiate between bulk nanobubbles and nanodroplets or nanoparticles. It is generally easy to detect colloids (i.e. something that looks different, e.g. scatters light differently than its surrounding solvent), but less easy to determine the nature of these colloids. This has led to misinterpretations in the literature, where nanodroplets or nanoparticles have mistakenly been assumed to be nanobubbles. In this paper, we review a multitude of experimental methods and approaches to prove the existence of bulk nanobubbles. We conclude that combinations of optical detection with physical perturbations such as pressure or ultrasound, or phase-sensitive holographic methods are the most promising and convenient approaches.     

A realization of digital wireless transmission for MRI signals based on 802.11b

In this paper, a digital wireless transmission system based on 802.11b standard for magnetic resonance imaging (MRI) application is designed and built for the first time to eliminate the interference aroused by coil array cables. The analysis shows that the wireless receiver has a very high sensitivity to detect MRI signals. The modulation technique of differential quadrature phase shift keyed (DQPSK) can be applied to MRI data transmission with rate of 2 Mbps and bandwidth of 2 MHz. The bench test verifies that this wireless link has a dynamic range over 86 dB supporting up to 3 T MRI system data transmission. The 2D spin echo imaging of phantom is performed and the SNR of the image obtained by the wireless transmission can be comparable with that got by the coaxial cables.     

一种基于混沌序列定位的跳频盲水印算法

对基于混沌序列定位的跳频盲水印算法进行了研究.采用跳频技术,利用描述图像自身特征的分形维数对图像块进行分类.根据图像块的种类决定水印嵌入的频带,将图像块的分类信息和一维混沌映射的初始条件作为密钥,由产生的混沌序列确定水印在频带中嵌入的位置,再通过系数关系比较的方法嵌入水印信息.实验结果表明,该算法在满足水印透明性的同时,水印信息在噪声干扰、图像处理、图像压缩及各种人为恶意攻击条件下具有很好的鲁棒性.采用跳频技术和混沌序列定位增强了该算法的安全性.     

Electrical actuation of dielectric droplets by negative liquid dielectrophoresis

This paper presents an electrical actuation scheme of dielectric droplet by negative liquid dielectrophoresis. A general model of lumped parameter electromechanics for evaluating the electromechanical force acting on the droplets is established. The model reveals the influence of actuation voltage, device geometry, and dielectric parameter on the actuation force for both conductive and dielectric medium. Using this model, we compare the actuation forces for four liquid combinations in the parallel-plate geometry and predict the low voltage actuation of dielectric droplets by negative dielectrophoresis. Parallel experimental results demonstrate such electric actuation of dielectric droplets, including droplet transport, splitting, merging, and dispending. All these dielectric droplet manipulations are achieved at voltages < 100 V_rms. The frequency dependence of droplet actuation velocity in aqueous solution is discussed and the existence of surfactant molecules is believed to play an important role by realigning with the AC electric field. Finally, we present coplanar manipulation of oil and water droplets and formation of oil-in-water emulsion droplet by applying the same low voltage.     

Development of microscale pattern for digital image correlation up to 1400 °C

Speckle patterns to be used for digital image correlation (DIC) at the micrometer level up to 1400 °C were fabricated by several methods. The quality of the patterns before and after heating was evaluated in terms of the mean intensity gradient (MIG) and the speckle size distribution. The displacement accuracy in simulative translation of images showed that the MIG alone was not enough to evaluate the pattern properties; a large MIG, an even speckle size distribution, and a wide speckle size range pattern were required for a good DIC. The reaction between the patterning material and substrate, the cracking of speckles, and the plastic flow of patterning material may cause changes in the pattern morphology at high temperature. Two patterning methods, spraying a mixture of ceramics powder and binder by a fine-nozzle air brush and abrading a polished surface, yielded a small pattern with high MIG values and even size distributions that was stable at 1400 °C. The potential of the fabricated patterns was shown by measuring the coefficient of thermal expansion of polycrystalline Al₂O₃ from 800 °C to 1400 °C.     

Investigation on interlaminar delamination tendency of multidirectional carbon fiber composites

In this investigation carbon fiber reinforced laminates with different orientation layups are prepared and studied under tensile loading condition. Multiple strain measurement techniques, namely, resistive strain gauges, embedded optical sensors and digital image correlation are used to analyze stress-strain behavior simultaneously through the thickness of composite materials, and to determine the sequence of failure in different plies. Inconsistencies of strains measured through different methods is correlated with the tendency for interlaminar delamination, therefore demonstrating the ability of multi-instrument approach to describe damage progress through the thickness of multidirectional laminates. Complementary analysis through acoustic emission methods reveals that the angle of off-axis surface plies can influence the sequence of failure under tensile loading condition, and damage monitoring capabilities of acoustic emission system is directly affected by delamination tendency of surface plies. Remarkably, the delayed failure of off-axis plies is shown to be related to reorientation of these layer towards loading direction using infrared thermography method.     

Determination of thermal expansion coefficient of a monofilament polyamide fiber using digital image correlation

Coiled polymer actuators are a type of artificial muscles that are a promising development in the field of smart materials. The coefficient of thermal expansion of monofilament polyamide fibers is a crucial parameter for understanding the actuation of coiled fibers. The main purpose of this work is to develop a new methodology for estimating the coefficient of thermal expansion and the transition temperature of monofilament polymer fibers. In the experimental procedure, axial deformations of monofilament polyamide fiber samples were induced by temperature variations using a controlled thermal system. These deformations were determined from images of polyamide samples using the digital image correlation method. Two different approaches based on distinct temperature conditions were conducted. An alternative model with three parameters, including the coefficient of thermal expansion, was introduced to describe the thermal-mechanical behavior of monofilament polyamide fibers. Moreover, polyamide samples were also characterized using four conventional methodologies. Results indicated that the coefficient of thermal expansion changed of a modest negative value to a large negative value and this transition occurred around the glass transition temperature of the polyamide. The thermal expansion curves demonstrate good repeatability and all estimated parameters were in accordance with literature, indicating that the proposed approach can be suitable for the proposed study. This investigation may help in understanding of the intrinsic thermal-mechanical behavior of polymeric monofilaments employed as actuators.     

Dynamic fracture testing of polymethyl-methacrylate (PMMA) single-edge notched beam

Dynamic fracture in single-edge notched polymethyl-methacrylate (PMMA) beams have been investigated by three-point-bending impact testing with a drop-weight machine. A high-speed camera combined with the digital image correlation (DIC) method is used to capture the impact-induced crack initiation and propagation, as well as the beam deformation fields and the open mode strain at the original notch tip. The crack propagation length is recorded and the instantaneous crack velocity is calculated. Furthermore, the dynamic fracture toughness K_Id is quantified from the loading-displacement relations at different impact velocities. The effects of the impact velocity and impact energy on dynamic fracture toughness, fracture initiation strain, as well as the corresponding influences on the fracture propagation velocity, are discussed.     

一种基于支持向量机的数字音频认证方法

提出一种基于数字水印技术的音频内容认证方法.选取稳定的梅尔倒谱特征构造特征向量,利用支持向量机自适应地选取合适的帧进行水印的嵌入和提取.结果表明,算法在保证嵌入水印的不可感知性的同时,能够有效地区分恶意的内容篡改和非恶意的常规信号处理操作,准确地定位篡改发生的位置.     

数码成像比色法测定水样中的总磷

在酸性介质中,磷酸二氢钾与钼酸铵、酒石酸锑钾及抗坏血酸作用,生成蓝色的络合物。随着磷酸二氢钾浓度的增加,溶液颜色加深,其数码成像的RGB值亦随着磷酸二氢钾浓度的增加而增加,由此建立数码成像比色法(DIC)测定水样中总磷的新方法。考察了DIC法的影响因素和最佳反应条件。与钼酸铵分光光度法对照,该方法简单,快速。用于实际水样的测定,相对标准偏差为1.8%~3.4%,回收率为99.7%~102.5%,结果与分光度法一致。