Preliminaries to the body-cover theory of pitch control

Preliminary theoretical and empirical work suggest that increased thyroarytenoid muscle activity may either increase or decrease fundamental frequency, depending on cricothyroid muscle activity and a new cross-sectional area parameter. This parameter is defined as the ratio of muscular tissue in vibration to total tissue in vibration. Canine laryngeal nerves were stimulated to measure vocal-fold length changes. These data, combined with previously reported tissue density, passive stress, and passive frequency data, were used to construct a set of curves predicting canine fundamental frequency from thyroarytenoid and cricothyroid muscle activity and the area ratio. The results suggest that high cricothyroid muscle activity and small area ratios tend to cause fundamental frequency lowering with increased thyroarytenoid muscle activity.     

Nonacid cleavable detergents applied to MALDI mass spectrometry profiling of whole cells

Although cleavable detergents were first synthesized a number of years ago, they have only recently been successfully applied to problems involving biological molecules. Recent reports have demonstrated that these compounds are useful for applications involving both 2D PAGE and mass spectrometry. However, most cleavable surfactants have utilized acid-labile functional groups to affect cleavage. In applications where extreme pH is required, acid cleavable detergents have limited usefulness. We report the synthesis of fluoride cleavable silane compounds and photolabile cinnamate esters as cleavable detergents having alternative cleavage chemistries than previously reported cleavable detergents. These compounds were applied to whole cell analysis using MALDI mass spectrometry, and it was demonstrated that their use results in an increase in the number of proteins analyzed by increasing protein solubility.     

基于文本频谱的中文文本聚类方法

本文提出了利用文本频谱进行中文文本轮廓分析的表征方式.该方法基于不同时代、体裁和领域的文本在文字使用方面具有偏好性的假说,以文本中单个字符为单位,通过文本频谱刻画方法统计所有单字符在文本中出现的频率,并使用刻画出的文本频谱对文本进行表征;利用频谱比对分析技术,可计算出任意文本间的距离,并以此距离为基础进行聚类分析.进一步的实验证实了该方法的有效性.     

Surface hardening of titanium by pulsed Nd:YAG laser irradiation at 1064- and 532-nm wavelengths in nitrogen atmosphere

The surface hardness of titanium modified by laser irradiation at different wavelengths in nitrogen atmosphere was investigated. Further, surface characteristics such as morphology, chemical state, and chemical composition in the depth direction were also studied. The size and depth of the craters observed in the laser-irradiated spots increased monotonically with an increase in the laser power. Furthermore, the crater formed by the 532-nm laser was deeper than that formed by the 1064-nm laser for the same laser power. Laser power beyond a certain threshold value was required to obtain a titanium nitride layer. When the laser power exceeds the threshold value, a titanium nitride layer of a few tens of nanometers in thickness was formed on the substrate, whereas a titanium oxide layer containing small amounts of nitrogen was formed when the laser power is below the threshold value. Thus, it was shown that laser irradiation using appropriate laser parameters can successfully harden a titanium substrate, and the actual hardness of the titanium nitride layer, measured by nanoindentation, was approximately five times that of an untreated titanium surface.     

Depth and Stanley depth of the edge ideals of square paths and square cycles

In this paper, we compute depth and Stanley depth for the quotient ring of the edge ideal associated to a square path on n vertices. We also compute depth and Stanley depth for the quotient ring of the edge ideal associated to a square cycle on n vertices, when n≡0,3,4( mod 5), and give tight bounds when n≡1,2( mod 5). We also prove a conjecture of Herzog presented in [5 Herzog, J. (2013). A survey on Stanley depth. In: Bigatti, M. A., Gimenez, P., Sáenz-de-Cabezón, E., eds. Monomial Ideals, Computations and Applications. Lecture Notes in Mathematics, Vol. 2083. Heidelberg: Springer, pp. 3–45. https://arxiv.org/pdf/1702.00781.pdf.[Crossref] , [Google Scholar]], for the edge ideals of square paths and square cycles.     

Glow Discharge as a Tool for Surface and Interface Analysis

Abstract

This review article focuses on the analytical capabilities of glow discharge optical emission spectrometry (GD‐OES) and mass spectrometry (GD‐MS) to perform compositional depth profiling (GD‐CDP). The properties of the Grimm‐type glow discharge as well as basic processes of sputtering are described and their influence on the GD as a surface and interface analytical tool are discussed. A series of examples from recent literature ranging from computer hard disks to molecular monolayers on copper substrates are presented to illustrate the excellent depth resolution that can be achieved with GD surface analytical techniques. The conditions for obtaining nanometer or even atomic‐layer depth resolution are discussed. Following this introduction is the possibilities of the technique a selection of applications principally chosen from our laboratories, demonstrating that GD‐OES and GD‐MS can be successfully employed as an analytical tool assisting the development of new materials and coatings. The applications cover common industrial tasks such as heat treatments, studies of diffusion processes at interfaces, and electrochemical depositions for biocompatible material. However, limitations and known artifacts are also discussed.     

Funnel-type etched ion tracks in polymers

It is shown that conical track etching is a much more complicated process than generally assumed. The choice of the corresponding parameters (i.e. the ratios of concentrations and diffusion coefficients of both etchant (e.g. NaOH) and stopping solutions (e.g. HCl) and the etching temperature) determines the ratio of polymer dissolution to etchant penetration. The latter value controls the counterplay of diffusion, etching, ionic conductivity, field emission and capacitive effects, which is decisive for both the final track shapes and their electronic properties. The stages of track evolution during etching under different conditions are outlined in detail. Both transparent conical nanopores and “funnel-type” tracks can be obtained, the latter consisting of a shorter cone and a residual latent track. Depending on the internal structure of that latent track segment, such funnel-type tracks either allow smooth transmission of the rectified currents or they emit unipolar current spikes. Not only the study of electronic properties of single ion tracks, but also of a multitude of tracks makes sense. Depending on the applied parameters, the individual track properties may either just add up, or new effects may be found that emerge from the interaction of the tracks among each other. This is preferentially the case for spike-emitting tracks, where effects such as phase-locked spike synchronization can be found as described by neural network theory.     

Profiling measurements of metal ion distribution in thin polymer inclusion membranes by Rutherford backscattering spectrometry

Polymer inclusion membranes (PIMs) composed of a homogeneous mixture of cellulose triacetate matrix, 2-nitro-phenyl-octyl-ether as plasticizer and tri-octyl-phosphine-oxyde as carrier were synthesized by the spin coating method. Synthesized membranes were doped with molybdenum metal ions and then characterized by four experimental techniques: thermo gravimetric and differential analyses, scanning electron microscopy (SEM), attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy and Rutherford backscattering (RBS) spectrometry using a 3.2 MeV He⁺ ion beam. The RBS analysis has established both the elemental composition as well as the Mo⁺ metal profiling of the studied PIMs. The experimental irradiation conditions were optimized in order to determine the ion fluence thresholds resulting in measurable changes in elemental composition of membranes. Changes in physico-chemical properties of the irradiated PIMs vs He⁺ ion fluence were observed with the ATR-FTIR analysis. Also, the SEM analysis of PIMs surfaces has revealed a porous texture, while the thermal analysis of annealed PIMs at 105°C has showed no significant changes of mass (～1%) of the studied samples.     

On Fiber Coefficients of Fiber Cones †

Let (R,𝔪) be a Cohen–Macaulay local ring of dimension d > 0, I an 𝔪-primary ideal of R, and K an ideal containing I. When depth G(I) ≥ d ? 1, depth F_K(I) ≥ d ? 2, and r(I|K) < ∞, we calculate the fiber coefficients f_i(I). Under the above assumptions on depth G(I) and r(I|K), we give an upper bound for f₁(I), and also provide a characterization, in terms of f₁(I), of the condition depth F_K(I) ≥ d ? 2.     

A Lower Bound on the Second Fiber Coefficient of the Fiber Cones

Let (R, 𝔪) be a Cohen–Macaulay local ring of dimension d > 0, I an 𝔪-primary ideal of R and K an ideal containing I. When depth G(I) ≥ d ? 1 and r(I | K) < ∞, we present a lower bound on the second fiber coefficient of the fiber cones, and also provide a characterization, in terms of f ₂(I, K), of the condition depth F _K (I) ≥ d ? 1.