盐酸吡哆辛及其制剂的二阶导数差示脉冲极谱法定量研究

建立盐酸吡哆辛及其制剂的二阶导数差示脉冲极谱定量分析方法。盐酸吡哆辛在0.1mol/L氢氧化钠溶液-0.1moL/L磷酸二氢钾溶液-水(体积比为1.2:8.8:990)的混合溶液中,于-0.140V(vs·Ag/AgCl)处出现一良好的二阶导数差示脉冲极谱峰,盐酸吡哆辛浓度在3.6×10~(-4)～9.6×10~(-4)mol/L范围内与其峰幅值呈显著的线性关系(P<0.01),线性相关系数r=0.9997,检出限为9.0nmol/L。     

Nanowire‐Based Electrochemical Biosensors

We review recent advances in biosensors based on one‐dimensional (1‐D) nanostructure field‐effect transistors (FET). Specifically, we address the fabrication, functionalization, assembly/alignment and sensing applications of FET based on carbon nanotubes, silicon nanowires and conducting polymer nanowires. The advantages and disadvantages of various fabrication, functionalization, and assembling procedures of these nanosensors are reviewed and discussed. We evaluate how they have been used for detection of various biological molecules and how such devices have enabled the achievement of high sensitivity and selectivity with low detection limits. Finally, we conclude by highlighting some of the challenges researchers face in the 1‐D nanostructures research arena and also predict the direction toward which future research in this area might be directed.     

Fluorinated poly(arylene ether ketone)s bearing pentafluorostyrene moieties prepared by a modified polycondensation

The polycondensation of decafluorobenzophenone with hexafluorobisphenol A was modified by the addition of a molecular sieve dehydrating apparatus to the refluxing reaction system. This modification promoted the polymerization and enabled the reactions to be conducted in milder conditions and completed in a shorter time, thereby depressing side reactions such as branching and crosslinking. The resulting fluorinated poly(arylene ether ketone)s (FPAEK) were free of gel particles and possessed the designed molecular weights. This modified procedure was also suitable for introducing crosslinkable pentafluorostyrene (FSt) moieties into the polymers at the chain ends and/or inside the chain with the vinyl group of FSt being pendant. The resulting FSt containing fluorinated poly(arylene ether ketone)s (FPAEK‐FSt) can then be thermally crosslinked at 100 °C in the presence of 1% benzoyl peroxide (BPO) or at 250 °C without any initiator. The glass‐transition temperatures (T_g's) of FPAEK increased with increasing molecular weight and leveled off at about 147 °C for the polymer with a number‐average molecular weight of 18,600 Da, whereas the values were not apparently affected by the addition of FSt units. However, crosslinking of the FPAEK‐FSt resulted in an approximate 30 °C increase of the T_g. Spin‐coating FPAEK‐FSt onto silicon wafers followed by crosslinking gave films with excellent thermal stability, physical strength, and adhesion to the substrate as well as good reproducibility in terms of film preparation and optical properties. The refractive index and birefringence of the films measured at a wavelength of 1.55 μm were 1.502 and 2.5 × 10^?3, respectively. © 2002 Government of Canada. Exclusive worldwide publication rights in the article have been transferred to Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4205–4216, 2002     

Cellular adhesion and proliferation on poly(3,4-ethylenedioxythiophene): Benefits in the electroactivity of the conducting polymer

Cell adhesion and proliferation in poly(3,4-ethylenedioxythiophene), an electroactive polythiophene derivative generated by anodic polymerization, has been investigated. Results show that epithelial cells Hep-2 present significant activity on the surface of poly(3,4-ethylenedioxythiophene) electrodeposited on stainless steel electrodes, no sign of cytotoxicity being detected for this conducting polymer. Indeed, seeded and cultured cells bound better to poly(3,4-ethylenedioxythiophene) than to uncoated stainless steel, the latter substrate being used as a control. Furthermore, the electrochemical characteristics of poly(3,4-ethylenedioxythiophene) covered with cells was determined in different biological media using cyclic voltammetry experiments. Results reveal a significant increase in the electroactivity of this material when it is covered with a cellular monolayer. The overall of the results evidences not only the biocompatibility of poly(3,4-ethylenedioxythiophene) with Hep-2 cells but also their electrocompatibility.     

钇对金属陶瓷力学性能和组织的影响

研究了添加钇对Ｔｉ（Ｃ，Ｎ）基金属瓷力学性能和组织的影响。结果表明，加入适量的钇能提高Ｔｉ（Ｃ，Ｎ）基金属陶瓷的抗变强度和硬度，其原因是由于钇与杂质硫起反应在化合物，净化了陶瓷相－金属相，陶瓷相－陶瓷相界面提高子界面结合强度     

聚醚醚酮酮和含联苯聚醚醚酮酮共聚物的熔融热

根据Ｆｌｏｒｙ热力学统计理论和比容－熔融热作国法，由ＤＳＣ结果得到了不同联苯含量的聚醚醚酮酮－含联苯聚醚醚酮酮（ＰＥＥＫＫ－ＰＥＢＥＫＫ）共聚物的熔融热，两种方法获得的结果吻合。在此基础上给出了ＰＥＥＫＫ－ＰＥＢＥＫＫ共聚物不同联苯含量的熔点计算表达式。结果还表明，随着联苯含量ｎＢ，的变化，明显改变；当ｎＢ＝０．３５时，ＰＥＥＫＫＰＥＢＥＫＫ共聚物的值最小。     

Spectral regions selection to improve prediction ability of PLS models by changeable size moving window partial least squares and searching combination moving window partial least squares

Changeable size moving window partial least squares (CSMWPLS) and searching combination moving window partial least squares (SCMWPLS) are proposed to search for an optimized spectral interval and an optimized combination of spectral regions from informative regions obtained by a previously proposed spectral interval selection method, moving window partial least squares (MWPLSR) [Anal. Chem. 74 (2002) 3555]. The utilization of informative regions aims to construct better PLS models than those based on the whole spectral points. The purpose of CSMWPLS and SCMWPLS is to optimize the informative regions and their combination to further improve the prediction ability of the PLS models. The results of their application to an open-path (OP)/FT-IR spectra data set show that the proposed methods, especially SCMWPLS can find out an optimized combination, with which one can improve, often significantly, the performance of the corresponding PLS model, in terms of low prediction error, root mean square error of prediction (RMSEP) with the reasonable latent variable (LVs) number, comparing with the results obtained using whole spectra or direct combination of informative regions for a compound. Regions consisting of the combinations obtained can easily be explained by the existence of IR absorption bands in those spectral regions.     

Resonance Rayleigh scattering method for the recognition and determination of double-stranded DNA using amikacin

In weakly acidic buffer medium, the interaction of amikacin with calf thymus DNA, yeast RNA and denatured DNA has been investigated by using resonance Rayleigh scattering (RRS) technique. The result shows that calf thymus DNA is capable of enhancing the RRS intensity of the amikacin, while yeast RNA and denatured DNA have very little enhancement effect. Based on the characteristics, a sensitive assay for detecting double-stranded DNA in the presence of denatured DNA and yeast RNA has been developed. The enhancement of the RRS signal is directly proportional to the concentration of double-stranded DNA in the range 0.02-12.0 μg ml⁻¹ for calf thymus DNA and its detection limit (3σ) is 2.5 ng ml⁻¹. The method shows a wide linear range and high sensitivity, and almost no interference can be observed from RNA, denatured DNA, amino acid and most of the metal ions. The trace amounts of nucleic acid in synthetic samples and practical samples are determined with satisfactory results. Therefore, the proposed method is promising for as an effect means for recognition in vivo and determination in situ of double-stranded DNA.     

Enzymatic synthesis of optically active α-chloro-δ-hydroxy-β-ketoalkanephosphonates and reactions thereof

A novel and enzymatic approach to α-chloro-δ-hydroxy-β-ketoalkanephosphonates was developed via enantioselective CALB-catalyzed acetylation and CRL-catalyzed hydrolysis. The resultant optically active compounds provide, via Horner-Wadsworth-Emmons (HWE) reaction, chiral α,β-unsaturated ketones that are building block with potential application in organic synthesis.     

A versatile and practical synthesis of bis(indolyl)methanes/bis(indolyl)glycoconjugates catalyzed by trichloro-1,3,5-triazine

A practical and efficient electrophilic substitution reaction of indoles with a variety of aldehydes was carried out using catalytic trichloro-1,3,5-triazine (10 mol %) in acetonitrile to furnish the corresponding bis(indolyl)methanes in excellent yields. Similarly, sugar derived aldehydes gave hitherto unknown bis(indolyl)glycoconjugates in very good yields.