横向爆炸载荷下开孔弹性板的应力集中

基于ANSYS 7.0/LS-DYNA程序,对3 m×3 m四边简支、厚度为0.025 m、中心开有0.3 m×0.3 m方孔的弹性板,在下三角爆炸载荷作用下的应力响应进行了分析;利用能量密度时间分布函数(TDFED)确定了动应力集中因子,重点讨论了时间步长和采样时间间隔对计算结果的影响。     

干式切削技术及其冷却方式

干式切削技术是指在切削加工过程中不使用任何切削液的新的工艺方法,具有清洁环保、降低生产成本、机床结构紧凑、提高产品质量等特点。对干式切削加工的关键技术之一———风冷却方式进行了介绍和论述。     

一种含有亚微米孔洞的新型微孔磷酸盐晶体材料的合成及其生长机理

采用水热法成功地合成了一种含有亚微米级孔洞的微孔磷酸盐晶体材料(记为HAP-TAP),其形貌特征是:六棱柱形的晶体表面分布着大量0.4～0.8μm的亚微米级孔洞,孔洞内长有片层状晶体.在样品晶化的过程中,通过控制合成时间,获得了纯六棱柱形晶体的大单晶(记为HAP).使用扫描电子显微镜(SEM)、粉末X射线衍射(XRD)、红外光谱和电子能谱(EDX)对HAP-TAP独特形貌的形成机理进行了研究和揭示.HAP的单晶XRD数据表明,HAP是一种具有二维空旷骨架结构的新型微孔磷酸铝晶体,其分子式为Al5(OH)2(PO4)7(C2N2H10)3.0.5H2O.EDX分析结果表明,生长于六棱柱形晶体孔洞内的片层状晶体为磷酸钛铝材料.     

Exact electronic properties in the classically forbidden region of a metal surface

We derive exact properties of the inhomogeneous electron gas in the asymptotic classically forbidden region at a metal–vacuum interface within the framework of local effective potential energy theory. We derive a new expression for the asymptotic structure of the Kohn–Sham density functional theory (KS‐DFT) exchange‐correlation potential energy v_xc(r) in terms of the irreducible electron self‐energy. We also derive the exact asymptotic structure of the orbitals, density, the Dirac density matrix, the kinetic energy density, and KS exchange energy density. We further obtain the exact expression for the Fermi hole and demonstrate its structure in this asymptotic limit. The exchange‐correlation potential energy is derived to be v_xc(z → ∞) = ?α_KS,xc/z, and its exchange and correlation components to be v_x(z → ∞) = ?α_KS,x/z and v_c(z → ∞) = ?α_KS,c/z, respectively. The analytical expressions for the coefficients α_KS,xc and α_KS,x show them to be dependent on the bulk‐metal Wigner–Seitz radius and the barrier height at the surface. The coefficient α_KS,c = 1/4 is determined in the plasmon‐pole approximation and is independent of these metal parameters. Thus, the asymptotic structure of v_xc(z) in the vacuum region is image‐potential‐like but not the commonly accepted one of ?1/4z. Furthermore, this structure depends on the properties of the metal. Additionally, an analysis of these results via quantal density functional theory (Q‐DFT) shows that both the Pauli W_x(z → ∞) and lowest‐order correlation‐kinetic W(z → ∞) components of the exchange potential energy v_x(z → ∞), and the Coulomb W_c(z → ∞) and higher‐order correlation‐kinetic components of the correlation potential energy v_c(z → ∞), all contribute terms of O(1/z) to the structure. Hence correlations attributable to the Pauli exclusion principle, Coulomb repulsion, and correlation‐kinetic effects all contribute to the asymptotic structure of the effective potential energy at a metal surface. The relevance of the results derived to the theory of image states and to KS‐DFT is also discussed. © 2005 Wiley Periodicals, Inc. Int J Quantum Chem, 2005     

A novel oligothiophene derivative as a hole‐transport with emitting material for OLED

A novel oligothiophene derivative containing the triphenylamine moiety with high glass transition temperature (T_g; 135 °C), 5,5′‐{bis[4‐di(4‐thiophenyl)amino]phenyl}‐2,2′‐bithiophene (TTPA‐dimer) was synthesized by the dimerization of tris[4‐(2‐thienyl)phenyl]amine (TTPA) with a palladium catalysis. Some types of electroluminescent (EL) devices that use the amorphous material for a hole‐ and an electron‐transporting with an emitting layer were fabricated. These devices emitted a bright green‐yellowish light (λ_emi; around 510 nm) with a small full width at half maximum (FWHM) rather than that of Alq₃. The single layer EL device showed a maximum luminance of 221 cd/m² at 8 V (0.06 lm/W at 100 cd/m²). On the other hand, the double layer (TTPA‐dimer/Alq₃) EL device that used Alq₃ as the electron transport material was increased up to 10830 cd/m² at 12 V (0.89 lm/W at 300 cd/m²) and with a lower turn‐on voltage (3.2 V at 0.1 cd/m²) than other types of EL devices. Copyright © 2003 John Wiley & Sons, Ltd.     

Chemical Reduction of CO2 to Different Products during Photo Catalytic Reaction on TiO2 under Diverse Conditions： an Overview

The chemical reduction of CO_2 remains a challenge with respect to the reversal of the oxidative degradation of any organic materials.The conversion of CO_2 into useful substances is essential in developing al- ternative fuels and various raw materials for different in- dustries.This also aids in preventing the continuous rise in tropospheric temperature due to the green house effect of CO_2.In this article an overview of the growth taken place so far in the field of CO_2 chemical reduction is pre- sented.The discussion comprises of photochemical meth- ods for the development of different products,viz.CO, CH_3O_H and CH_4,through chemical reduction of CO_2. This includes the use of photo catalysts,mainly TiO_2, and the role of a hole scavenger(such as 2-propanol)for this purpose.     

Prospects of Sol-Gel Process for Spectral Hole-Burning Glasses

Persistent spectral hole burning was studied in Eu³⁺ ions-doped Al₂O₃-SiO₂ glass prepared by a sol-gel method. The gel synthesized by the hydrolysis of Si- and Al-alkoxides and EuCl₃·6H₂O was heated in air and hydrogen gas atmospheres. For the glass heated in air to contain OH bonds, the hole was formed by the photoinduced rearrangement of the OH bonds surrounding the Eu³⁺ ions, and was thermally refilled and erased above 200 K. On the other hand, the glass heated in hydrogen gas showed the hole spectrum above 200 K. It was found that the hole depth was independent of the temperature and was 7% of the total intensity at room temperature. The proposed mechanism was the electron transfer between the Eu³⁺ ions and the defect centers formed in glass matrix.     

星状四芳胺类空穴传输材料的合成

有机电致发光器件 (ＯＥＬＤ)是继阴极射线管平板显示器 (ＣＲＴ)和液晶显示器 (ＬＣＤ)之后的第三代平板显示器。它具有主动发光、驱动电压低(2伏左右 )、发光亮度高 (1 3 0 0 0ｃｄ ｍ2 以上 ) ,无软Ｘ 射线污染 ,响应速度快 (1 0 -6 ～ 1 0 -8秒 )等优点。从 1 987年美藉华人邓清云等提出多层结构的ＯＥＬＤ的器件结构以来的十多年间 ,ＯＥＬＤ以及其材料的研究已成为显示技术以及显示材料等方面的研究热点 ,发展很快[1～ 3] 。在 1 999年日本先锋公司已开发出了单色的汽车用ＯＥＬ平板显示器商品 ,今年东芝公司又开发出了 2 .7英寸的彩…     

基于网格映射技术的弹性密封垫孔洞设计研究

针对密封橡胶在压缩情况下易发生翘边而严重影响管片接缝防水效果的问题,基于ABAQUS/Standard中的网格映射技术,建立了超弹性橡胶密封垫的压缩数值模型,对7种不同开孔形状、开孔率、孔洞排列方式的密封垫开展轴向压缩数值模拟。结果表明：在整个压缩数值模拟过程中,弹性橡胶密封垫接触面应力呈现两端大、中间小的多峰值W形分布;闭合孔为圆角三角形的密封垫相较于其他开孔形状的密封垫,平均接触应力最大值提升86.8%;开孔率为0.294的密封垫相较于其他开孔率的密封垫,平均接触应力最大值提升92.6%;错孔排列的密封垫相较于对孔排列的密封垫,平均接触应力最大值提升25.2%;相较于敞开孔构型变化,闭合孔构型变化对接触应力的影响更大,两者同一工况下平均接触应力最大可相差85.2%。     

Generalised 2-circulant inequalities for the max-cut problem

The max-cut problem is a fundamental combinatorial optimisation problem, with many applications. Poljak and Turzik found some facet-defining inequalities for the associated polytope, which we call 2-circulant inequalities. We present a more general family of facet-defining inequalities, an exact separation algorithm that runs in polynomial time, and some computational results.