Advances in two-dimensional GC with glass capillary columns

A versatile two-dimensional gas chromatograph is described, consisting of 2 separate ovens, one intermediate trap, an auxiliary inlet, and the necessary hardware to effect off-line switching according to the principle of Deans. The unit has been designed for use with high resolution glass capillary columns. The performance of individual instrumental components was critically evaluated. Results showed that low dead volume glass to metal connections were required in the manifold and detector lines to minimize extra-column effects. The mass of the intermediate trap must be low to allow rapid heating. Operational parameters are discussed and examples of some applications are shown.     

Effect of HF addition on the microwave-assisted acid-digestion for the determination of metals in coal by inductively coupled plasma-atomic emission spectrometry

The microwave-assisted acid-digestion for the determination of metals in coal by ICP-AES was investigated, especially focusing on the necessity of adding HF. By testing five certified reference materials, BCR-180, BCR-040, NIST-1632b, NIST-1632c, and SARM-20, it was found that the two-stage digestion without HF (HNO₃ + H₂O₂ was used) was very effective for the pretreatment of ICP-AES measurement. Both major metals (Al, Ca, Fe, and Mg) and minor or trace metals (Co, Cr, Cu, Mn, Ni, Pb, and Zn) in coal gave good recoveries for their certified or reference values. The possibility of ‘HF-memory effect’ was cancelled by the use of a set of vessels which had been never contacted with HF. Twenty-four Japanese standard coals (SS coals) were analyzed by the present method, and the concentrations of major metals measured by the present method provided very high accordance with those from the authentic JIS (Japanese Industrial Standard) method.     

Direct determination of estriol 3- and 16-glucuronides in pregnancy urine by column-switching liquid chromatography with electrospray tandem mass spectrometry

Using column-switching liquid chromatography/tandem mass spectrometry (LC-MS/MS), we developed an improved analytical method of urinary estriol glucuronides. This new method is derived predominantly from maternal and fetal precursors in pregnancy. We used in the following procedure: first, we filtered urine samples with a membrane filter. Next, we directly injected the 50 microL aliquot of urine samples onto a pre-column. Then, after activating the column-switching valve, we backflushed the loaded samples onto the C(18) analytical column. Urine samples can be assayed within 20 min without any sample preparation steps. We monitored separated estriol glucuronides by negative electrospray ionization (ESI) and selected-reaction monitoring (SRM). The calibration range of estriol-3-glucuronide (E3-3G) and estriol-16-glucuronide (E3-16G) was 0.1-20 microg/mL and the linearity of the method was 0.9984 for E3-3G and 0.9987 for E3-16G. The limits of detection at a signal-to-noise (S/N) ratio of 3 were 10 ng/mL (E3-3G) and 5 ng/mL (E3-16G). The analytical recovery was over 85% and, in general, inter-day and intra-day variability for precision and accuracy were less than 10%. When applied to a pregnancy urine sample to biomedical monitoring of the function of the maternal/fetal unit, the proposed method allowed rapid and sensitive screening for the detection of E3-3G and E3-16G.     

Use of intermittent jets to enhance flux in crossflow filtration

This paper deals with the influence of a new flow unsteadiness on the permeate fluxes in crossflow filtration. A pneumatically controlled valve generates intermittent jets from the main flow, causing the formation of large vortices moving downstream along the tubular membrane. The main results of the numerical calculation of such flows are given. The experimental study was carried out by filtering a bentonite suspension through an ultrafiltration mineral membrane. Time evolutions of flux were achieved in steady and unsteady operating conditions. Results concerning the influence and limits of the nozzle to tube diameter ratio and the jet velocities are discussed. The applicability of such an unsteady flow is examined with a view to effects on energy consumption and possible viscosity effects.     

Critical micelle concentrations for alkyltrimethylammonium bromides in water from 25 to 160°C

Critical micelle concentrations were determined by conductance measurements for decyl-, dodecyl-, tetradecyl- and hexadecyltrimethylammonium bromide in water at 25, 60, 95, 130, and 160°C. The results are discussed in terms of the equilibrium model and the nonlinear Poisson-Boltzmann model for micelle formation. The free energies of transferring a methylene group from water to the oil-like interior of the micelle are found to be –781 at 25°C, –796 at 60°C, –819 at 95°C, –815 at 130°C, and –787 at 160°C cal-mol^–1.     

Correction for the Concentration Polarization for Simultaneous Reduction of Several Reactants: Platinum(II) Aquachloride Complexes

The reaction of electroreduction of platinum(II) aquachloride complexes on a negatively charged dropping mercury electrode is used to determine specific features of interpretation of experimental data in the case of parallel conversion of several forms of a reactant, connected with the manner of introducing a correction for the concentration polarization. The difference in the charges of species undergoing simultaneous reduction gives rise to ambiguity when analyzing kinetic data on the dependence of current on the supporting-electrolyte concentration at constant electrode charge. A new self-consistent technique for deducing model parameters (ratio between reactant discharge rate constants) is proposed.     

Phase Equilibria and Critical Curves of Binary Ammonia–Hydrocarbon Mixtures

Liquid or dense supercritical ammonia has been suggested as an extraction fluid. It is indeed good solvent for very different classes of compounds, as can be seen from phase diagrams. Such diagrams for binary systems of ammonia and hydrocarbons are presented and discussed on the basis of their critical curves. Apparatus and methods for the measurement of phase equilibria and equation of state data of fluid mixtures at high pressure are described.     

乙烯-α-烯烃共聚物的结晶性能及其临界序列结晶长度的研究

本文用DSC、WAXD及偏光显微镜(PLM)方法,研究了化学反应法催化剂合成的乙烯-α-烯烃共聚物的结晶性能及其临界序列结晶长度。结果表明,随共聚物中α-烯烃含量增大,共聚物的微晶尺寸、结晶度及熔点均逐渐减小,而晶胞参数增大。变化的辐度戊烯>辛烯。共聚物的临界结晶序列长度(n)和k值均戊烯<辛烯。上述结果表明影响支链进入晶格的主要因素是α-烯烃支链长度和结构。     

支化高分子在溶液中的交叠与缠结

溶液中高分子的交叠和缠结与其链结构密切相关。支化聚苯乙烯的临界交叠浓度C和临界缠结浓度C_E比分子量相同的线型聚苯乙烯的大,说明交叠和缠结同分子在溶液中线团的体积有直接关系。     

BaCe0.8Ho0.2O3-a陶瓷的性质与应用

Ceramic BaCe0.8Ho0.2O3-α with orthorhombic perovskite structure was prepared by conventional solid state reaction, and its conductivity and ionic transport number were measured by ac impedance spectroscopy and gas concentration cell methods in the temperature range of 600-1000 ℃ in wet hydrogen and wet air, respectively. Using the ceramics as solid electrolyte and porous platinum as electrodes, the hydrogen-air fuel cell was constructed, and the cell performance at temperature from 600-1000 ℃ was examined. The results indicate that the specimen was a pure protonic conductor with the protonic transport number of 1 at temperature from 600-900 ℃ in wet hydrogen, a mixed conductor of proton and electron with the protonic transport number of 0.99 at 1000 ℃. The electronic conduction could be neglected in this case, thus the total conductivity in wet hydrogen was approximately regarded as protonic conductivity. In wet air, the specimen was a mixed conductor of proton, oxide ion and electron hole. The protonic transport numbers were 0.01-0.09, and the oxide-ionic transport numbers were 0.27-0.32. The oxide ionic conductivity was increased with the increase of temperature, but the protonic conductivity displayed a maximum at 900 ℃, due to the combined increase in mobility and depletion of the carriers. The fuel cell could work stably. At 1000 ℃, the maximum short-circuit current density and power output density were 346 mA/cm^2 and 80 mW/cm^2, respectively.