UPS网络控制和电压波形显示的研究

对目前在UPS方面研究的焦点问题作了阐述 ,并重点介绍了UPS网络控制系统的实现方法、系统功能和技术特点     

基于特征造型的注塑件CAD/CAE研究

以某电器零件的特征造型与注塑分析模拟为例，介绍了Pro/Engineer的特点以及在注塑件产品开发中的应用。     

THE TRANSFER BEHAVIOUR OF SOME CATIONS AT WATER／NITROBENZENE INTERFACE BY SEMIDIFFERENTIAL CYCLIC VOLTAMMETRY

The transfer of Sr~(2+) and Ba~(2+) ion, facilitated by 18-Crown-6 present in the aqueous phase, and of succinylcholine ion at w/nb interface were investigated by semi-differential cyclic voltammetry. A good polarographic curve of succinylcholine ion dissolved in water was obtained in the system of 0.01 mol/l LiCl (w)——0.01 mol/l TBATPB (nb). The peak current is directly proportional to the concentration of SC~(2+) ion. It can be used for the determination of SC and the detection limit is 1.05×10~(-5) mol/l.The apparent D~w and D~(nb) have been estimated. The transfer of Sr~(2+) and of Ba~(2+) at the interface are facilitated by 18-Crown-6 present in the aqueous phase and the peak current is directly proportional to the concentration of 18-Crown-6 in water. This method can be used for the determination of the complexing agent and for the stability constant of the complex formed in the aqueous phase.All the experimental results are in keeping with the theoretical.     

L-shell/subshell ionization of Au,Pb and Bi by low energy proton impact

Proton induced X-ray emission has been used to measureL-subshell and total ionization cross-sections of Au, Pb and Bi in the energy range of 200–350 keV. The ionization cross-sections have been extracted using the X-ray spectra and other quantities like fluorescence yields, transition probabilities, relative widths and Coster-Krönig fraction etc. involved in the process. The results have been compared with the cross-sections measured before and discussed in the light of known theories regarding the ion-atom collisions.     

冶炼工业废气中SO_2的脱除研究

研究用软锰矿的水悬浮液脱除冶炼工业废气中SO_2的工艺可行性,提出抑制副产物MnS_2O_6生成的途径。     

新型锆质不定形耐火材料的研制

以废旧电熔锆刚玉为主要原料,采用合理的粒度级配,应用复合结合剂和外加剂以凝聚结合的方式研制成功具有高荷重软化温度、高强度、低气孔率、低烧结线变化的新型锆质不定形耐火材料。图4,表4,参3。     

Distribution of melamine in polyester–melamine surface coatings cured under nonisothermal conditions

The influence of experimental cure parameters on the diffusion of reactive species in polyester–melamine thermoset coatings during curing has been investigated with X‐ray photoelectron spectroscopy and attenuated total reflectance Fourier transform infrared. The diffusion of melamine plays a vital role in the curing process and, therefore, in the ultimate properties of coatings. At a low (<20%) hexamethoxymethylmelamine (HMMM) crosslinker concentration, the matrix composition is uniform, but at high HMMM concentrations, excess HMMM rapidly segregates to the air–coating interface. The rate of migration is governed by the difference in the surface free energies of polyester and HMMM and the concentration gradient of HMMM between the bulk and the surface. An increased rate of energy absorption also increases the rate of migration of HMMM to the surface. A physical model has been proposed to explain this surface segregation phenomenon in terms of cocondensation and self‐condensation reactions. It suggests that an appropriate amount of melamine can be segregated on the surface and allowed to self‐condense to form a desired thickness of a melamine topcoat through the control of the binder composition and cure conditions. This technique can be implemented to apply a melamine topcoat during cure. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 83–91, 2004     

基于C/S与B/S相结合的教学管理系统的规划

针对当前高等教育体制改革学校办学规模不断扩大,存在多校区的办学模式,原来基于C/S或B/S单一模式结构的教学管理系统存在诸多弊端,对目前高校教学管理的实际需要和特点进行了分析,比较了两种模式的优缺点,提出了一种基于C/s和B/S结合的结构模式的教学管理系统,给出了基于该模式下教学管理系统的功能模块、实现方法、系统的软硬件支撑条件.     

模数转换(A/D)集成电路设计原理及其应用技术

随着数字信号处理技术的不断发展和人们对电子产品质量要求的不断提高,模数转换(A/D)集成电路芯片已成为电子产品设计中最关键的芯片器件之一,它的性能优劣直接决定着电子产品的质量.介绍了几种主要的A/D集成电路的基本原理,分析了各类A/D芯片的性能特点及其应用范围,指出了提高不同应用领域A/D芯片质量的关键技术及其发展趋势.     

有限局部环Z/2\+kZ上斜对称矩阵标准形和伪辛群的阶

设R=Z/2\+kZ(k>1)是\{2\}[TX-]为非单位的有限局部环. 该文首先确定了R上斜对称矩阵标准形. 设G\+m\-p(R,H)={P∈GL\-m(R)|PHP′=H}是由矩阵H确定的伪辛群,其中H=[JB((][HL(2]0[]I\+\{(v)\}\=-I\+\{(v)\}[]0[HL)][JB))]Δ，Δ=[JB((][HL(2]\{2\}[TX-]\+\{k-1\}[]\{1\}[TX-]\=-\{1\}[TX-][]0[HL)][JB))]. 其次,计算了伪辛群G\+m\-P(R,H)的阶|G\+m\-P(R,H)|.