Enantiomer separations with chromatographic supports based on β-cyclodextrin polymers immobilized on porous silica. Role of the polymer structure in separating ability

Summary Two -cyclodextrin (-CD)-containing polymers have been prepared either by condensation of -CD molecules with a bifunctional reagent or by grafting a -CD derivative on to a linear polymer (polyvinylimidazole). HPLC stationary phases were obtained by adsorption of the -CD polymers on to silica. The ability of these chromatographic supports to resolve racemic mixtures of organic compounds such as amino acid derivatives, phenylhydantoins, barbiturates, and hydroxycoumarin derivatives has been investigated. Results were found to depend on the chemical structure of the -CD polymers     

Surface area of papermaking woodpulps used by the British paper industry

The surface area was determined for various papermaking woodpulps: bleached eucalyptus globulus sulphate pulp; bleached eucalyptus grandis sulphate pulp; bleached betula verrucosa sulphate pulp; bleached pine/spruce sulphate pulp; bleached pine/spruce sulphate pulp fines. The method of negative adsorption was used which gives an effective wet surface area. By looking at negative adsorption data more closely, some inference can be made about the morphology of the substrate.Glossary of symbols B (e²/2kT)^1/2 - ¯C concentration of fibre per unit volume of pulp - 1 - ¯¯c - h angle between pore and the axis of the bed in a permeable material - K permeability coefficient - k Boltzmann constant - k ₀ shape factor for pores in a permeable material - n _i concentration of co-ion in the bulk solution - n _i experimentally observed increase in concentration of co-ion in the bulk solution - S surface area - S _t wS - S ₀ surface area per unit volume of permeable material - V _t total volume of solution - V excluded volume - V _s excluded volume accessible to water but not to ions - V _obs experimentally observed excluded volume - w weight of dry fibre - ¯ effective volume of fibres in a permeable pad - surface potential at outer Helmholtz plane     

Solid phase extraction and analysis of horse urine for aminocaproic acid

Summary A rapid and efficient procedure is described for extraction and determination of aminocaproic acid in horse urine. Urine was extracted by passing through a bonded silica column (Bond-Elut). The adsorbed drug was washed free of endogenous materials before being eluted. The extract was then examined by thin-layer chromatography and HPLC. The purity of the extract was determined by gas chromatography-mass spectrometry.     

Polarographische Erfassung von auf DC-Plastikfolien getrennten Substanzen

Zusammenfassung Auf DC-Plastikfolien getrennte Substanzen lassen sich mit guter Genauigkeit (Wiederfindungsraten > 95 %) in Gegenwart des Folienmaterials gleichspannungspolarographisch durch Reduktion an der Hg-Tropfelektrode bestimmen. Die von den Leuchtpigmenten abgegebenen Zn-Ionen müssen vor der Registrierung der i-E-Kurven durch ÄDTA maskiert werden.Wir danken dem Fonds der Chemischen Industrie, Frankfurt am Main, für finanzielle Unterstützung dieser Arbeit und Herrn O. Schreiber für gewohnte sorgfÄltige Mitarbeit.     

Preparation and characterization of sulfated zirconia (SO4/ZrO2)/Nafion composite membranes for PEMFC operation at high temperature/low humidity

Fine particle superacidic sulfated zirconia (SO₄²⁻/ZrO₂, S-ZrO₂) was synthesized by ameliorated method, and composite membranes with different S-ZrO₂ contents were prepared by a recasting procedure from a suspension of S-ZrO₂ powder and Nafion solution. The physico-chemical properties of the membranes were studied by ion exchange capacity (IEC) and liquid water uptake measurements, scanning electron microscopy (SEM) and X-ray diffraction (XRD) analysis, thermogravimetry–mass spectrometry (TG–MS) and Fourier transform infrared (FT-IR) spectroscopy. The results showed that the IEC of composite membrane increased with the content of S-ZrO₂, S-ZrO₂ was compatible with the Nafion matrix, the incorporation of the S-ZrO₂ could increase the crystallinity and also improve the initial degradation temperature of the composite membrane. The performance of single cell was the best when the S-ZrO₂ content was 15 wt.%, and achieved 1.35 W/cm² at 80 °C and 0.99 W/cm² at 120 °C based on H₂/O₂ and at a pressure of 2 atm, the performance of the single cell with optimized S-ZrO₂ was far more than that of the Nafion at the same condition (e.g. 1.28 W/cm² at 80 °C, 0.75 W/cm² at 120 °C). The 15 wt.% S-ZrO₂/Nafion composite membrane showed lower fuel cell internal resistance than Nafion membranes at high temperature and low relative humidity (RH).     

Quantitative HPTLC determination of prostaglandin E1

Direct in situ determination of PGE₁ in dioxane/water (1:1) at concentrations between 50 μg/ml and 1 mg/ml is described. HPTLC of PGE₁ was carried out on HPTLC Kieselgel 60 o.F. plates; application (200 nl) was with a Nano-Appllcator and ethyl acetate/formic acid (400:5, v/v) served as mobile phase. The spots were located by dipping the plates into a 3% cupric acetate solution in 15% aqueous phosphoric acid, followed by heating at 120°C for 15 min. The plates were then evaluated directly at λ = 345 nm by chromatogram spectrometry. The coefficient of variation is 3.6%.     

用T-jump/FTIR研究MnCP、NiCP和PbCP的快速热分解(英)

0IntroductionCarbohydrazideisahydrazinederivativewithwhitecrystalofstrongreducingbehaviors.Becauseithasmanycoordinationatoms(fournitrogenatomsandoneoxygenatom),carbohydrazidecan,therefore,beusedasmultidentateligand.Itscoordinationcom鄄poundiswidelyusedint…     

Studies on the Oxazaborolidine-catalyzed Enantioselective Reduction of 3-Morpholin-4-yl-1-phenyl-1-propanone with Density Functional Theory

Density functional theory (DFT) has been applied to study the enantioselective reduction of 3-morpholin-4-yl-l-phenyl-l-propanone with borane catalyzed by (S)-4-benzyl-5,5-diphenyl-l,3,2-oxazaborolidine at the B3LYP/6-31G* level. All molecular species involved in the four reaction steps have been fully optimized and the structural parameters are provided, and the micro process of reaction was also investigated. The catalyst-alkoxyborane adduct formed in step Ⅲ exhibits a B-O-B-N tetra-atomic ring. Reaction coordination calculations show that BH3 can react with 3-morpholin-4-yl-l-phenyl-l-propanone spontaneously, resulting in the need of 2 tool BH3 in the reaction.     

Electronic structure of unstable intermediates

The geometry of the linear molecule HBO, has been investigated within the restricted Hartree-Fock LCAO-MO-SCF approximation. The calculated bond lengths for the near Hartree-Fock calculation were R(H-B)=2.1913 bohr, R(B-O)=2.2284 bohr. Several one electron properties have been calculated for the minimum energy configuration.     

Racemization of chiral amino alcohols III: Effect of Mg or Ca addition on the activity and stability of the Co/γ-Al2O3 catalyst

The racemization of R-(-)-2-amino-1-butanol in a reaction using Co/γ-Al₂O₃ catalysts and catalysts modified by Mg or Ca was investigated in this paper. Complete racemization was achieved with a yield of over 83% at using the Mg modified Co/γ-Al₂O₃ catalyst under optimized reaction conditions of 170°C and 2.5 MPa of H₂. The catalysts were thoroughly characterized by XRD, XPS, TPR, SEM and TEM. The addition of Mg and Ca may be advantageous for dispersing and stabilizing the active species of the Co/γ-Al₂O₃ catalyst, protecting from sintering, significantly improving its catalytic activity and stability.