铁矿粉化学热加工中亚铁含量的测定

提出了一种铁矿粉热加工生产工艺中亚铁含量测定的新方法。在氮气保护下，用盐酸溶出样中的亚铁，在硫磷混酸介质中以重铬酸钾标准溶液滴定，并对溶样条件进行了研究。该方法简单、快速、准确，已成功地应用于氧化催化法生产氧化铁中亚铁的控制分析和成品鉴定。     

二点滴定法研究

就二点滴定法的原理，方法和应用进行了讨论，导出了二点滴定法计算公式。讨论了滴定剂加入量与测定结果准确度的关系。已用本法对标样样液及试样进行了多次测定，测定结果相对误差及相对标准偏差约０．２％。本法简便，快速，准确，且昨达于任何滴定类型的通用方法。     

Tween-20与牛血清白蛋白的相互作用

通过表面张力和等温滴定量热方法，研究了非离子表面活性剂Tween-20与牛血清白蛋白(BSA)的相互作用. 结果表明，BSA与Tween-20的相互作用较弱，当Tween-20浓度增大时，能将吸附于表面上的BSA分子取代. BSA/Tween-20混合体系的性质随温度的变化趋势与单一非离子型表面活性剂相似. BSA浓度在3.7×10^-5～11.1×10^-5 kg•L^-1范围内，Tween-20的cmc不随BSA浓度的变化而变化. 当Tween-20的含量一定时，Tween-20与BSA相互作用过程的热效应也与BSA 的浓度无关. BSA/Tween-20混合体系的热力学参数表明， BSA的存在使Tween-20的cmc减小，体系的熵变增大.     

十六烷基三甲基溴化铵光度滴定法测定硫酸软骨素钠盐

建立一种测定硫酸软骨素的新方法。十六烷基三甲基溴化铵在KH2 PO4 Na2 HPO4 缓冲溶液中、乳化剂OP共存下与硫酸软骨素反应形成离子对缔合物 ,溶液转变成稳定的乳化液。用光度滴定法测定硫酸软骨素。用标准加入法做回收试验 ,回收率为 99.9%～ 10 0 .2 % ,相对标准偏差0 .32 %～ 0 .4 0 %。方法应用于外贸样品测定 ,结果满意 ,方法准确、简便、快速     

交流示波极谱法中i_f～E曲线的研究 Ⅳ.示波极谱氧化还原滴定法

在i_f～E曲线的测量方法中,由于氧化和还原剂都具有电化学活性,因此,这两种试剂的量就可以通过不同电极电位处的法拉第电流峰敏锐地反映出来。当利用i_f～E曲线指示氧化还原滴定终点时,终点的示波图形,不仅反映氧化和还原剂电流峰的出现和消失,而且反     

Studying dispersoid systems

Summary Measurements of energy transformation in mitochondria are done on a capillary differential titration calorimeter CTD2156. It is important to mention that a sediment is quickly formed by the mitochondria suspension without mixing by means of a vibrating needle. During the measurements, the vibrating needle is located inside the working volume of the chamber. The design of the calorimeter is substantiated theoretically. It provides a new mode of a reagent input in the measuring volume of the calorimetric chambers. It expands the spectrum of tasks that can be solved using this instrument. In the capillary calorimeter the calorimetric chambers unit is simple and small in size. These advantages of capillary chambers provide an opportunity to unite 20 capillary calorimetric chambers in one calorimetric block. It allows designing a multi-channel titration calorimeter. There are obvious advantages of such a calorimeter over other instruments in screening researches and in researches of objects maintaining stability only for a short time.     

对数浓度图在氧化还原滴定分析中的应用

文中就对数浓度图在氧化还原滴定分析中的绘制及其应用进行了较为详细的讨论。     

Evaluation of the quality of colour changes of complexometric indicators in the titration of copper (II) with EDTA by tristimulus colorimetry

The quality of colour changes of the indicators hematoxylin, 4(2-pyridylazo)resorcinol (PAR), xylenol orange, pyrocatechol violet, chromazurolS and eriochrome cyanineR in the complexometric titration of copper(II) with ethylenediaminetetraacetic acid (EDTA) were studied with the help of tristimulus colorimetry, utilising a comparative study of the parameters SCD (specific colour discrimination), CIE La^*b^* 1976 and LABHNU 1977. Hematoxylin was found to be the best indicator among those studied. A screened indicator, viz. PAR + malachite green (52), was developed to enhance the quality of colour transition at the end-point and the accuracy of the titrimetric determination.     

High throughput continuous titration based on a flow ratiometry controlled with feedback-based variable triangular waves and subsequent fixed triangular waves

We propose a new approach for high-throughput continuous titration based on a flow ratiometry. The method was applied to potentiometric titrations of acids and bases. A base solution, the flow rate F_B of which was varied in response to controller output voltage V_c, was merged with an acid solution under constant total (acid + base) flow rate. Downstream, the pH of the mixed solution was measured with a flow-through glass electrode. Initially, V_c, and thus F_B was increased linearly. At the instant the equivalence point (EP) was sensed, the ramp direction of V_c was reversed from upward to downward. The direction was reversed to upward when EP was sensed again. Such the feedback-based operation gives a triangular waveform of V_c, because there is a delay corresponding mainly to the transit time of merged solutions to reach the sensor. The value of V_c that gives EP composition, V_E, was estimated by averaging the most recent maximum and minimum values of V_c. Next, fixed triangular waves of V_c was used to control F_B. The amplitude and the scan rate of the waves were fixed narrower and faster, respectively, than those in the feedback-based operation in order to improve the throughput rate. The EP can be located as long as the scan range covers V_E. These automated processes limited the titration to just the narrow range around EP, and thus realized extremely high throughput rate of maximally 17.6 titrations per minute (=3.4 s per titration) at R.S.D. = 0.35%.