Influence of ionic liquid counterions on activity and selectivity of ethylene trimerization using chromium-based catalysts in biphasic media

In recent years ionic liquids (ILs) have attracted much interest because of their widespread use in various fields. Several trimerization and oligomerization catalysts have been evaluated in ILs with different organic–inorganic hybrid structures. High catalytic activity and selectivity, easy product separation, and recycling of the catalyst are the advantages of a biphasic catalyst system compared to the homogeneous catalysts. In this study, the influence of IL counter-anions on activity and selectivity of the ethylene trimerization catalysts based on Cr-SNS-R was investigated. All synthesized materials were characterized using Fourier-transform infrared spectroscopy, ¹H NMR, ¹³C NMR, UV–Vis. spectroscopy, thin-layer chromatography, and elemental analysis (CHNS). In ethylene trimerization reaction, the dodecyl substituent in the SNS ligand exhibited better activity and selectivity than the butyl substituent. The results revealed that the presence of BF₄⁻ as a counter-anion in the IL led to an increase in activity and selectivity compared to Br⁻ and I⁻ counter-anions. It was found that the BF₄⁻ counter-anion plays a conclusive role in the development of 1-hexene activity and selectivity to a maximum amount of 71,132 g_1-C6/(g_Cr × h) and more than 99%, respectively. Finally, the catalyst was reused thrice without losing its 1-hexene selectivity.     

ETUDE STRUCTURALE DE QUELQUES SPIROPHOSPHORANES A LIAISON P–C EXOCYCLIQUE

Abstract

The PMR spectra of some spirophosphorans containing the P–C bond are analysed. The results allow us to determine the stereochemistry of these compounds (conformation, stereoisomerism).

Le spectre de RMP de quelques spirophosphoranes à liaison P–C est analysé. Les résultats sont utilisés pour préciser la stéréochimie de ces composés (conformation, stéréoisomérie).     

A microfluidic paper-based analytical device for rapid quantification of particulate chromium

Occupational exposure to Cr is concerning because of its myriad of health effects. Assessing chromium exposure is also cost and resource intensive because the analysis typically uses sophisticated instrumental techniques like inductively coupled plasma-mass spectrometry (ICP-MS). Here, we report a novel, simple, inexpensive microfluidic paper-based analytical device (μPAD) for measuring total Cr in airborne particulate matter. In the μPAD, tetravalent cerium (Ce(IV)) was used in a pretreatment zone to oxidize all soluble Cr to Cr(VI). After elution to the detection zone, Cr(VI) reacts with 1,5-diphenylcarbazide (1,5-DPC) forming 1,5-diphenylcarbazone (DPCO) and Cr(III). The resulting Cr(III) forms a distinct purple colored complex with the DPCO. As proof-of-principle, particulate matter (PM) collected on a sample filter was analyzed with the μPAD to quantify the mass of total Cr. A log-linear working range (0.23–3.75 μg; r² = 0.998) between Cr and color intensity was obtained with a detection limit of 0.12 μg. For validation, a certified reference containing multiple competing metals was analyzed. Quantitative agreement was obtained between known Cr levels in the sample and the Cr measured using the μPAD.     

Speciation Analysis of Cr(III) and Cr(VI) after Solid Phase Extraction Using Modified Magnetite Nanoparticles

A new solid phase extraction (SPE) method has been developed for the speciation of Cr(III) and Cr(VI). This method is based on the adsorption of Cr(VI) on modified alumina‐coated magnetite nanoparticles (ACMNPs). Total chromium in different samples was determined as Cr(VI) after oxidation of Cr(III) to Cr(VI) using H₂O₂. The chromium concentration has been determined by flame atomic absorption spectrometric (FAAS) technique and amount of Cr(III) was calculated by substracting the concentration of Cr(VI) from total chromium concentration. The effect of parameters such as pH, amount of adsorbent, contact time, sample volume, eluent type, H₂O₂ concentration and cetyltrimethylammonium bromide (CTAB) concentration as modifier on the quantitative recovery of Cr(VI) were investigated. Under the optimal experimental conditions, the preconcentration factor, detection limit, linear range and relative standard deviation (RSD) of Cr(VI) were 140 (for 350 mL of sample solution), 0.083 ng mL^?1, 0.1‐10.0 ng mL^?1 and 4.6% (for 5.0 ng mL^?1, n = 7), respectively. This method avoided the time‐consuming column‐passing process of loading large volume samples in traditional SPE through the rapid isolation of CTAB@ACMNPs with an adscititious magnet. The proposed method was successfully applied to the determination and speciation of chromium in different water and wastewater samples and suitable recoveries were obtained.     

Chromium(V) Oxide Trichloride,and some Pentachlorido‐­oxido‐chromate(V) Salts: Structures and Spectroscopic ­Characterization

Crystalline CrOCl₃ contains [Cl₂OCr(μ‐Cl)₂CrOCl₂] molecules with two square pyramidal CrOCl₄ units sharing a common edge and with the Cr–O arranged anti, a new structure type for transition metal MOX₃ compounds. Crystals are monoclinic with space group P2₁/c, Z = 4, with a = 5.735(5), b = 13.738(7), c = 11.318(4) Å, α = 90°, β = 98.346(6)°, γ = 90°. Its IR and UV/Vis spectra are reported and compared with those of the C_3v monomer found in the gas phase. Structures are also reported for M₂[CrOCl₅] (M = Cs or Rb) and show a pseudo‐octahedral anion. Cs₂[CrOCl₅] adopts a K₂PtCl₆‐type structure with [CrOCl₅]^2– ions randomly orientated, but Rb₂[CrOCl₅] is orthorhombic with space group Pnma with a = 13.6471(7), b = 9.9175(5), and c = 6.9562(4) Å. Rietveld refinement of the data on the rubidium salt gave Cr–O = 1.628(1), Cr–Cl_transO = 2.652(7), Cr–Cl_transCl = 2.239(8)–2.342(3) Å. Corresponding Cr^V oxide bromide species do not form.     

Spectrophotometric determination of Chromium(VI) using cyclam as a reagent

A simple, rapid, sensitive, and inexpensive method for spectrophotometric determination of chromium(VI), based on the absorbance of its complex with 1,4,8,11-tetraazacyclotetradecane (cyclam) is presented. The complex showed a molar absorbtivity of 1.5?×?10⁴?L?mol^?1?cm^?1 at 379?nm. Under optimum experimental conditions, a pH of 4.5 and 1.960?×?10³?mg?L^?1 cyclam were selected, and all measurements were performed 10?min after mixing. Major cations and anions did not show any interference; Beer's law was applicable in the concentration range 0.2–20?mg?L^?1 with a detection limit of 0.001?mg?L^?1. The standard deviation in the determination is ±0.5?mg?L^?1 for a 15.0?mg?L^?1 solution (n?=?7). The described method provides a simple and reliable means for determination of Cr(VI) in real samples.     

Cloud point extraction combined with graphite furnace atomic absorption spectrometry for the determination of chromium species and their distribution in cigarette and cigarette ash

In this article, the contents and distribution of total chromium, Cr(III) and Cr(VI) in various cigarettes and cigarette ashes were determined by using a cloud point extraction (CPE) separation/preconcentration combined with graphite furnace atomic absorption spectrometric (GFAAS) detection. Different extraction reagents, such as tetramethylammonium hydroxide (TMAH), Na₂HPO₄, Na₂CO₃/NaOH, NaOH and H₂O, were tested for the extraction of Cr species, and the extraction efficiency was estimated. The experimental results showed that TMAH was the most efficient extraction reagent for the analyte in cigarette samples. By using the established method, the total chromium, Cr(III) and Cr(VI) in various cigarettes and cigarette ashes were determined and their distribution was studied. It was found that Cr(III) is a main species in cigarettes, but that it can be partly oxidized to Cr(VI) during smoking.     

Cr(III)/Cr(VI) speciation in water samples by extractive separation using Amberlite CG-50 and final determination by FAAS

Twenty-five uncultivated surface soil samples collected from the northern and southern regions of Dhaka Export Processing Zone (DEPZ), industrial area of Bangladesh, were analyzed for their contents of Y, lanthanides and natural radionuclides (Th and U) using an inductively coupled plasma mass spectrometer (ICP-MS). Analogous concentrations of the Y, lanthanides, Th and U were observed in the both regions of DEPZ around several kilometer distances. Further, the measured values showed no particular contamination. However, the concentrations of the light lanthanides (La, Ce and Nd) in the Bangladeshi soils were around twice the worldwide average value. But, the smooth curve of the chondrite normalized patterns of the lanthanides suggested that the lanthanide contents of the Bangladeshi soils in this area are the results of the natural dispersion process rather than anthropogenic activities. In addition, the relatively high Th and U concentrations and Th/U ratio were observed in Bangladeshi soils of this area, most likely due to the effect of their parent materials such as clay stones which have a high Th/U ratio. Since this is the first precise result for the Y, lanthanides, Th and U contents in Bangladeshi soils, it could be useful in understanding the background level and the characteristics of these elements in Bangladeshi soils.     

Magtrieve™: a convenient catalyst for the oxidation of alcohols

We find that Magtrieve™ (CrO₂) catalyzes the oxidation of a wide variety of alcohols with periodic acid as the terminal oxidant. Mild conditions, short reaction times, and facile aqueous work-up make this a most attractive method. Olefins are not oxidized under these conditions; thus alcohols react selectively in the presence of alkenes. Conditions have been optimized with respect to catalyst loading, solvent, and co-oxidant; and the scope of the reaction includes primary and secondary benzylic, allylic, and aliphatic alcohols.     

CaNa[Cr(OH)6] – A Layered Hydroxochromate(III) with Ordered Brucite Structure and its Thermal Decomposition

Green single-crystals of the hydroxochromate(III) CaNa[Cr(OH)₆] were grown under highly alkaline hydrothermal conditions at about 200 °C. The starting materials Ca(NO₃)₂ · 6H₂O and Cr(NO₃)₃ · 9H₂O were reacted in a mixture of water and sodium hydroxide with the molar ratio of 2.8:1. CaNa[Cr(OH)₆] crystallizes in the non-centrosymmetric trigonal space group R3 with the lattice parameters a = 583.86(2) pm and c = 1428.73(6) pm [T = 100(1) K]. Characteristically, the crystals are reverse-obverse as well as inversion twins. The crystal structure is a stack of uncharged metal hydroxide layers, which can be regarded as a cation-ordered rhombohedral variant of the Mg(OH)₂ (brucite) structure type. The oxidation state of chromium(III) and its coordination by hydroxide groups was confirmed by UV/Vis and IR spectroscopy, respectively. Temperature-dependent magnetic measurements revealed paramagnetic behavior with an effective moment of 3.82 μ_B per chromium atom. The thermal decomposition of CaNa[Cr(OH)₆] takes place at about 225 °C, where the fast elimination of 1.5 equivalents of water is followed by the oxidation of chromium(III) to chromium(VI). Upon further heating to 1000 °C and 1200 °C, the intermediate decomposition products CaCrO₄ and Na₂CrO₄ transform into the oxochromates(V) Ca₅(CrO₄)₃O_0.5 and Ca₃(CrO₄)₂, respectively.