铬(Ⅲ)含β一二酮混合配体配合物的合成和表征

首次合了五种Cr(β-dik)Cl_2py_2型(其中β-dik分别为乙酰丙酮、苯甲酰丙酮、三氟乙酰丙酮、2—噻吩甲酰三氟丙酮、二苯甲酰甲烷)和一种Cr(pmbp)Cl_2(thf)混合配体配合物、一种Cr(pmbp)_3配合物。并对上述化合物进行了电子光谱、红外光谱等的表征工作。     

Trimethylsilylcyclopentadienylchromium(III) complexes with diphenyl-2-pyridylphosphine: synthesis, structural characterisation and catalytic behaviour of [(C6H5)2PC5H4NH][(η-Me3SiCp)CrCl3]

Reaction of CrCl₃ with LiCpSiMe₃ in THF leads to the formation of a solvated intermediate, [(η⁵-Me₃SiCp)CrCl₂(THF)], which in turn reacts with diphenyl-2-pyridylphosphine to yield the complex [(C₆H₅)₂PC₅H₄NH][(η⁵-Me₃SiCp)CrCl₃] (1) in 66% yield. As a secondary product was isolated the neutral complex [(η⁵-Me₃SiCp)CrCl₂{(C₆H₅)₂PC₅H₄N}] (2) in 5% yield. The structure of complex 1 has been determined by single crystal X-ray diffraction. In the anion the metal centre shows a pseudo-octahedral geometry with the centroid of the trimethylsilylcyclopentadienyl ligand occupying the centre of three octahedral sites, and three chloride atoms completing the co-ordination sphere. Complex 1 in the presence of MAO leads to the formation of an active catalyst for the polymerization of ethylene.     

Neue neutrale und kationische Mono‐Aziridin‐Komplexe des Typs [CpMn(CO)2Az], [CpCr(NO)2Az]+ und [(Ph3P)(CO)4ReAz]+ über CO‐, Hydrid‐ und Chlorid‐Abspaltungsreaktionen

Novel Neutral and Cationic Mono‐Aziridine Complexes of the Type [CpMn(CO)₂Az], [CpCr(NO)₂Az]⁺, and [(Ph₃P)(CO)₄ReAz]⁺ via CO‐, Hydride‐, and Chloride‐Elimination Reactions The monoaziridine complexes 1 — 5 are obtained by three differently induced substitution reactions. The photolytically induced CO substitution reaction of [CpMn(CO)₃] with 2, 2‐dimethylaziridine leads to the neutral N‐coordinate aziridine complex [Cp(CO)₂Mn{$\overline{N(H)CMe₂C}$ H₂}] ( 1 ). The protonation of [(Ph₃P)(CO)₄ReH] with CF₃SO₃H and consecutive treatment with 2, 2‐dimethylaziridine or 2‐ethylaziridine gives the salt‐like aziridine complexes [(Ph₃P)(CO)₄Re{$\overline{N(H)CMe₂C}$ H₂}](CF₃SO₃) ( 2 ) or [(Ph₃P)(CO)₄Re{ H₂}](CF₃SO₃) ( 3 ) by hydride elimination reactions. The like‐wise salt‐like complexes [Cp(NO)₂Cr{$\overline{N(H)CMe₂C}$ H₂}](BF₄) ( 4 ) and [Cp(NO)₂Cr{ H₂}](CF₃SO₃) ( 5 ) are synthesized from [CpCr(NO)₂Cl] by chloride elimination with AgX (X = BF₄, CF₃SO₃) in the presence of 2, 2‐dimethylaziridine or 2‐ethylaziridine, respectively. As a result of X‐ray structure analyses, the metal atoms are trigonal pyramidally ( 1, 4, 5 ) or octahedrally ( 2, 3 , cis‐position) configurated; the intact three‐membered rings coordinate through the distorted tetrahedrally configurated N atoms. All compounds 1‐5 are stable with respect to the directed thermal alkene elimination to give the corresponding nitrene complexes; the IR, ¹H‐ and ¹³C{¹H}‐NMR, and MS spectra are reported and discussed.     

Mixed-metal cluster chemistry. 26 . Proclivity for “all-terminal” or “plane-of-bridging-carbonyls” ligand disposition in tungsten-triiridium clusters

Reaction of WH(CO)₃(η-C₅Me₅) with IrCl(CO)₂(4-H₂NC₆H₄Me) affords WIr₃(μ-CO)₃(CO)₈(η-C₅Me₅) in low yield. A structural study reveals a WIr₂-centred plane of bridging carbonyls, in contrast to the crystal structure of WIr₃(CO)₁₁(η-C₅H₅) (all-terminal carbonyl distribution). DFT calculations reveal an increasing proclivity to adopt an all-terminal CO disposition for clusters MIr₃(CO)₁₁(η-C₅H₅) in the gas phase on proceeding from M=Cr to Mo and then W, consistent with structural studies in the solid state for which the tungsten-containing cluster is the only all-terminal example. Increasing electron donation from the ligands in the tungsten system (either from phosphine substitution or cyclopentadienyl permethylation) suffices to impose a plane of bridging carbonyls in the ground state structure. ¹³C NMR fluxionality studies reveal that CO exchange mechanism(s) for WIr₃(CO)₁₁(η-C₅H₅) and the related tetrahedral cluster W₂Ir₂(CO)₁₀(η-C₅H₅)₂ are very fast and involve all carbonyls on the clusters. DFT calculations on MIr₃(CO)₁₁(η-C₅H₅) (M=Cr, Mo) substantiate a ‘merry-go-round’ mechanism for carbonyl scrambling in these systems, a result which is consistent with the scrambling behaviour seen in the NMR fluxionality studies on the W-containing congener.     

Synthesis and electrochemistry of Group 6 tetracarbonyl (N,N′-bis(ferrocenylmethylene)ethylenediamine)metal(0) complexes

Thermal substitution reaction of Cr(CO)₄(η^2:2-1,5-cyclooctadiene), Mo(CO)₄(η^2:2-norbornadiene), and W(CO)₅(η²-bis(trimethylsilyl)ethyne) with N,N′-bis(ferrocenylmethylene)ethylenediamine (bfeda) yields M(CO)₄(bfeda) complexes which could be isolated from the reaction solution and characterized by elemental analysis, MS, IR, and NMR spectroscopy. In the case of tungsten, W(CO)₅(bfeda) is formed as intermediate and then undergoes the ring closure reaction yielding the ultimate product W(CO)₄(bfeda). The electrochemical behavior of the M(CO)₄(bfeda) complexes was studied by using cyclic voltammetry (CV) and differential pulse voltammetry (DPV) in dichloromethane with tetrabutylammonium tetrafluoroborate as electrolyte. Constant potential electrolysis of the complexes was performed successively at their peak potentials at 0 °C in their CH₂Cl₂ solution and the electrolysis was followed by in situ recording the electronic absorption spectra in every 5 mC. In the electrolysis of Cr(CO)₄(bfeda), the central Cr(0) is oxidized first and electrolysis continues with oxidations of two ferrocenyl groups until the end of totally three moles of electron passage per mole of complex. In the electrolysis of Mo(CO)₄(bfeda) and W(CO)₄(bfeda) the first oxidation occurs on the central atom forming a short-lived species which undergoes an intramolecular one-electron transfer and is reduced back to M(0) while one of the ferrocene units is oxidized to the ferrocenium cation at the same time. This indicates that the electron is transferred from iron to the central metal atom.     

XRD法研究CrO3与NaY、NaM分子筛的表面相互作用

负载于多孔性、高比表面载体上的三氧化铝是重要的工业催化剂，多年来人们对催化剂中Croa的存在状态以及与载体的相互作用进行了广泛的研究［‘－4］，发现CrO。能在载体表gn散成非晶相的表面化合物，非晶相Cr（VI）具有较高的催化活性．我们曾经对MoO。／NaY，MoO。／NaM体系进行过系统的研究，发现MOO。与分子筛载体间存在强表面相互作用［’］．在此研究基础上，选择了CrO3／NaY、CrO。／NaM体系，采用XRD法对上述体系进行了研究．结果表明170oC下晶相CrO。能在NaY、NaM分子筛上自发分散成非晶相Cr（VI），且分散量大．C…     

Halbsandwichkomplex des Chroms mit dem Trifluormethylisocyanid-Liganden

Halfsandwich Complexes of Chromium with the Trifluoromethyl Isocyanide Ligand The synthesis and properties of the halfsandwich complexes [η⁶-1,3,5-C₆H₃(CH₃)₃]Cr(CO)₂(CNCF₃), [η⁶-1,3,5-C₆H₃(CH₃)₃]Cr(CO)(CNCH₃)(CNCF₃) und [η⁶-1,3,5-C₆H₃(CH₃)₃]Cr(CNCF₃)₃ is reported. The vibrational spectroscopic data proof the strong π accepting character of the trifluoromethyl isocyanide ligand.     

Chemischer Transport und Sublimationsverhalten von CrBr3 — Experimente und Modellrechnungen

On the Chemical Transport and Sublimation of CrBr₃ — Experiments and Model Calculations The migration of CrBr₃ in the presence of high concentrations of bromine (for example D(Br₂) = 0,05 mmol/ml; closed silica ampoules) in the investigated temperature range (T? = 625°C to 875°C; T? = 50°C) is a result from the endothermic reaction The chemical transport of CrBr₃ is superimposed with the sublimation. With low concentrations of D(Br₂) and high temperatures T? is the sublimation decisive participated. This is a result of the homogenous equilibrium between CrBr_3,g and CrBr_4,g (2a) The reaction (2a) in comparison with the chemical transport of CrCl₃ with Cl₂ (Gl. (2b)) is more shifted to CrBr_3,g.     

铬（Ⅲ）—尼克酸配合物合成方法的改进及其与酸反应特性的研究

为了避免Ｃｒ（ＯＨ）３引起的污染,本文用改进的方法合成了配合物Ｃｒ（ｎｉｃ）２（Ｈ２Ｏ）３ＯＨ,这里ｎｉｃ表示尼克酸根。通过红外光谱、热分析对其结构进行了表征。结果表明,尼克酸以羧基氧与铬（Ⅲ）配位。对该配合物与酸的反应特性和可能的机理进行了研究讨论。     

Chromium-mediated aldol and homoaldol reactions on solid support directed towards an iterative polyol strategy

Chromium-Reformatsky and chromium-homoaldol reactions run under neutral and mild reaction conditions. They are highly chemoselective, tolerant towards most common functional groups, and are not prone to retroaldol reactions. Initial studies directed to transfer these homogeneous chromium-mediated solution-phase reactions to solid phase are presented. The main objective was to develop a methodology to aid a combinatorial iterative strategy to polyols (polyketides) on solid phase. A general reactivity problem was observed with polystyrene based resins compared to the solution-phase reactions, independent if the electrophilic (aldehyde) or nucleophilic (bromide) end of the polyol chain was supported to the resin. A complicated penetration, or loss of the polar solvent environment after penetration into the resin, might be responsible for the reduced reactivity. Application of either a soluble polystyrene resin or a polystyrene resin with a polar polyethylene glycol tether resulted in improved yields.