无缝线路站区拉方道岔施工技术方案探讨

结合具体实例阐述了无缝线路站区道岔拉方的施工方案,该方案是解决无缝线路道岔爬行有效的途径和方法.     

基于JIT的生产计划与控制方法研究

在介绍传统生产方式和JIT（Just In Time）生产方式基本概念的基础上,比较了两种生产方式各自的特点,分析了JIT生产方式在生产计划与控制中的应用,其中重点对订单随时增减变更情况下的生产计划与控制措施进行了探讨.     

北方铜业冶炼厂硫酸系统风机单机运行实践

详细介绍了S1200-16型鼓风机在北方铜业冶炼厂的使用情况，以及S1200-16型鼓风机的结构、技术参数，提出了为确保风机的正常运行所采取的处理措施。     

一维连通流形的分类（Ⅰ）

连通的一维流形在同胚的意义之下恰可分成７类，它们分别以下列７个空间作为代表：１）紧致区间［０，１］；２）半实轴［０，∞）；３）实数轴Ｒ；４）单位圆周Ｓ１；５）超穷长半直线［０，ω１）；６）单向超穷长直线（－∞，ω１）；７）（双向）超穷长直线（－ω１，ω１）．     

Theoretical Analysis of the Motional Model of Nonlinear Heterogeneous Catalysis

In this paper, a model of the motional nonlinear heterogeneous catalysis process is discussed using the characteristic line method, the analytical results of elution profile are obtained and the formula which determines the parameters of reaction rate and adsorption isotherm through the motional measurement data under the nonlinear condition is given.     

线图求根

给定线图G,如何求得根图H,使G=L(H)?本文就无向图和有向图作出解答.     

Minimum concave cost production system: A further generalization of multi-echelon model

We will consider a concave minimization problem associated with a series production system in which raw material is processed inm consecutive facilities. The products at some facility are either sent to the next facility or stocked in the warehouse. The amount of demand for the final products during periodi, i = 1,,n, are known in advance. Our problem is to minimize the sum of processing, holding and backlogging cost, all of which are assumed to be concave.The origin of this model is the classical economic lot size problem of Wagner and Whitin and was extensively studied by Zangwill. This model is very important from the theoretical as well as practical point of view and this is one of the very rare instances in which polynomial time algorithm has been constructed for concave minimization problems.The purpose of this paper is to extend the model further to the situation in which time lag is associated with processing at each facility. We will propose an efficient O(n ⁴ m) algorithm for this class of problems.     

FMS生产计划的柔性研究

通过对影响FMS利用率的因素进行分析,本文提出了FMS生产计划的柔性的概念,建立了柔性的指标体系,并对柔性的归一化和综合评判等问题进行了研究.需要特别指出的是,本文首次将系统可靠性理论引入FMS生产计划,并根据其不同运行阶段系统可靠性的变化情况,对制定生产计划提出了建议.     

在线氧含量分析中的自动反吹

为解决在线氧含量分析测试仪表常被聚合物堵塞的问题，提出了自动反吹的时序分配和实施控制方案，从而为安全生产提供了保障。     

CoOx改性TiO2光催化剂的制备、优化及其光催化分解水析氢性能研究

利用热分解法制备了不同掺杂量的CoO_x-TiO₂系列光催化剂, 并优化了制备方法。在用XRD、TEM和XPS等技术对催化剂表征的基础上，探讨了乙醇作为电子给体时CoO_x改性对P25-TiO₂光催化分解水析氢性能的影响。本文还利用连续瞬态电流-时间响应和循环伏安法等电化学方法，考察了CoO_x-TiO₂改性系列光催化剂光照条件下电流响应强度、起始光电响应特性差别及光催化析氢电位变化等光电化学性能。光催化性能实验结果表明，适当掺杂CoO_x(110～400 ℃焙烧时最佳掺杂量约为0.4wt% Co，500 ℃焙烧时最佳掺杂量约为0.6～0.8wt% Co)能够显著地提高TiO₂析氢光催化性能，产氢速率提高2个数量级。另外在适当温度下的热处理，能够改善催化剂光催化性能(最佳处理温度为300～400 ℃)。光电化学性能评价结果表明，适当掺杂CoO_x和适当温度下焙烧能在催化剂表面形成较多的析氢活性物种——含钴复合物，能有效增强催化剂光电流响应强度，并使得析氢光还原电位向有利于析氢方向位移。高含量掺杂CoO_x会在催化剂表面形成某种碳化物物种，大量含钴复合物活性中心的出现会降低光吸收效率，增加TiO₂表面光生电子-空穴复合率而使催化剂失去析氢光催化性能。