Multinuclear magnetic resonance study of some mesoionic oxatriazoles containing nitrogenous exocyclic groups

¹H,¹³C,¹⁴N and¹⁵N NMR measurements are reported for four mesoionic 1-oxa-2, 3, 4-triazoles containing exocyclic nitrogenous groups. The NMR signal assignments are discussed and compared with those previously published for some corresponding oxatriazoles. The results obtained support the proposed cyclic mesoionic structures for the compounds studied. The questions of possible charge delocalization and valence tautomerism are addressed. Compound with N^– H as a exocyclic group (Fig. 1) is found to be relatively unstable, this is attributed to proton migration in the corresponding non-cyclic form of this molecule.Published in Khimiya Geterotsikiicheskikh Soedinenii, No. 9, pp. 1260–1263, September, 1995.     

工时充值法在生产管理中的应用

根据企业生产管理的需要,创新性地总结出了“工时充值法”,并对工时充值法的指导思想、内容、适用范围、操作程序、意义、实际工作中应注意的问题等进行了诠释和探讨。     

膜结构裁剪及展开的修正二次测地线法

对膜结构裁剪分析中目前应用较广的裁剪线的生成方法进行了比较研究，提出修正二次测地线法。确定了采用测地线作为裁剪线及展开图形的基准线。之后对已有图形展开方法——二次测地线法做了适当改进，提出修正二次测地线法。     

基于遗传禁忌算法的双资源约束下并行生产线调度研究

并行生产线调度问题兼有并行机器和流程车间调度问题的特点,是一类新型的调度问题。在考虑遗传算法早熟收敛特性和禁忌搜索法自适应优点的基础上,将遗传算法和禁忌搜索法结合起来,提出了基于遗传算法和禁忌搜索算法的双资源并行作业车间的调度优化问题算法,即考虑到了产品的调度受到机器、工人等资源制约的影响,对算法中种群的构造,适应度计算,遗传操作等方面进行了研究,最后给出了实例仿真和结论。     

In‐line monitoring of UV photopolymerization with a quartz crystal resonator

An in‐line monitoring device using a quartz crystal resonator for thin film polymerization was proposed, and its performance has been evaluated by implementing in the UV polymerization of 2‐hydroxyethyl methacrylate with a photoinitiator of 1‐chloroanthraquinone. Because the variation of resonant resistance of the resonator is proportional to the square root of viscosity change that is closely related to the polymerization degree, the resistance can be used as a measure of the polymerization degree. The resistance measurements were compared with the outcome of instrumental analyses of polymerization degree using an FTIR spectrometer and a gel permeation chromatograph. The experimental results showed that the resistance measurements were consistent with the experimental outcome of the instrumental analyses, and this indicates the effectiveness of the proposed device. Owing to the simplicity and availability of the resonator system, its wide utilization in the monitoring of a variety of film polymerization processes, including photoresistor application, is expected. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2428–2439, 2006     

剃齿时齿形中凹现象的形成机理

本文综合啮合原理、微分几何和弹性力学的基础理论,对剃齿过程中刀具齿面和被剃齿轮齿面间的失配进行了分析。最后利用径向力求出了齿面间的压切量,从而解释并验证了剃齿过程中产生的齿形中凹现象。这对提高剃齿精度、降低噪音有着重要意义。     

利用低能质子束产生高强度放射性束流

加拿大TRIUMF实验室利用¹¹C成功验证了一种产生高强度(～10⁸ions/s)放射性束流的方法. 该方法不同于普通在线同位素分离方法, 它利用了13MeV的低能强流质子束, 可以产生一系列核天体物理实验感兴趣的高强度放射性束流.     

鲁北地区商周时期的海盐业

采用XRD和XRF分析测试方法，研究了山东省渤海湾地区滨州市阳信县李屋遗址和寿光市大荒北央遗址出土的商代晚期的陶器——盔形器及附着土壤．样品的Na元素和Cl元素XRF分析结果表明：李屋遗址和大荒北央遗址出土的盔形器的含盐量明显高于其他样品，显示这二地的盔形器与早期海盐生产有关．李屋遗址出土的盔形器表面附着土样用去离子水过滤后，滤液结晶体的XRD分析结果，进一步表明该盔形器是商周时期渤海湾地区海盐生产的器物．大荒北央遗址出土的盔形器的内壁沉淀物与长江三峡中坝遗址出土的花边陶釜的内壁沉淀物具有基本相同的物相，这进一步表明其与海盐生产有关．     

无缝线路站区拉方道岔施工技术方案探讨

结合具体实例阐述了无缝线路站区道岔拉方的施工方案,该方案是解决无缝线路道岔爬行有效的途径和方法.