Characterization of silicon nitride particles synthesized in an atmospheric-pressure convection-stabilized arc

Silicon nitride powders were synthesized in an atmospheric-pressure convection-stabilized arc using silicon and ammonia as reactants. The morphology and particle size distributions of the silicon nitride particles were characterized by SEM, TEM, and electron diffraction analyses. The silicon nitride particles collected in the plasma reactor were formed by either gas-condensed phase reactions or chemical vapor reactions. The morphologies of the particles formed by gas-condensed phase reactions consisted of -Si₃N₄ prisms, -Si₃N₄ matte, -Si₃N₄ needles, and spaghetti-like whiskers. For the homogeneously nucleated particles, the morphologies included dendrites, needles, platelets, and amorphous particles. Most of the particles formed were aggregates with particle size distributions ranging from 500 to 1500 Å depending on the location of injection of the reactants.     

Comparison between ab Initio and Modified INDO-MO Calculations of N20

Both STO-3G ab initio and s-p separation-type-modified INDO semiempirical methods were applied to molecular-orbital calculation of the N₂₀ molecule. From these two methods, the optimized bond distances between the nearest N atoms (d_n-n) and the most calculated thermodynamic data are close to each other. The positive values of ΔH_a° and ΔG_a° for the atomization reaction in this work prove that N₂₀ is stable. In contrast to conventional INDO and MINDO/3, but similar to former AMI and MNDO calculations, both ΔH_r° and ΔG_r° are positive in the formation reaction, which indicates that N₂₀ belongs to the category of high-energy molecules.     

2-Benzoylamino-6,7-dimethoxy-4H-3,1-benzoxazin-4-one: Synthesis and investigation of serine protease inactivation

Summary 2-Benzoylamino-6,7-dimethoxy-4H-3,1-benzoxazin-4-one was prepared by thermal treatment of 2-(3-benzoylthioureido)-4,5-dimethoxybenzoic acid and by benzoylation of 2-amino-6,7-dimethoxy-4H-3,1-benzoxazin-4-one. The inactivation of chymotrypsin and human leukozyte elastase by the title compound and 2-benzoylamino-4H-3,1-benzoxazin-4-one is reported.

---

2-Benzoylamino-6,7-dimethoxy-4H-3,1-benzoxazin-4-on: Synthese und Untersuchung der Inaktivierung von Serin-Proteasen

Zusammenfassung 2-Benzoylamino-6,7-dimethoxy-4H-3,1-benzoxazin-4-on wurde durch thermische Behandlung von 2-(3-Benzoylthioureido)-4,5-dimethoxybenzoesäure und durch Benzoylierung von 2-Amino-6,7-dimethoxy-4H-3,1-benzoxazin-4-on hergestellt. Über die Inaktivierung von Chymotrypsin und humaner Leukozyten-Elastase durch die Titelverbindung und 2-Benzoylamino-4H-3,1-benzoxazin-4-on wird berichtet.

     

2,2-Difluor-1,2,3-trimethyl-1,3-diaza-2λ5-phospholidin

2,2-Difluoro-1,2,3-trimethyl-1,3-diaza-2λ⁵-phospholidine The title compound 1 is obtained in about 50% yield by oxidative fluorination of 1,2,3-trimethyl-1,3-diaza-2λ³-phospholidine, 6 , with IF₅. 1 is characterized by its nmr, mass, and ir spectra.     

Optimization of the electrophoretic deposition of YBa2Cu3O7−x superconducting large area coatings

Large area coatings (>10cm²) of the high temperature superconductor YBa₂Cu₃O_7–x (x = 0.1 – 0.2) (YBCO) have been prepared by scale up an electrophoretic deposition technique using silver sheets and Si-wafers coated with Ag or Au as substrates. Several parameters, like the kind of the solvent, the applied voltage, the distance between the electrodes, the initial concentration of the suspension and the temperature during the electrophoresis were investigated in order to attain high deposition rates, as well as uniform YBCO coatings with the proper stoichiometry. To obtain a strongly adherent and dense coating a subsequent appropriate sintering and annealing procedure has been developed. The coatings obtained were characterized for their stoichiometry and superconducting properties by X-ray diffraction (XRD), Raman spectroscopy and magnetic measurements. The homogeneity and thickness of the films and the average grain size of the deposited particles have been investigated by optical and scanning electron microscopy (SEM).     

Phase-transfer catalysis in reactions of 5-alkyl-3H-furan-2-ones with dichlorocarbene

Treatment of 5-alkyl-3H-furan-2-ones and 5-alkyl-3H-thiophen-2-ones with dichlorocarbene under conditions of phase-transfer catalysis at 20–90 °C results in insertion of the carbene at the C=C bond followed by skeletal rearrangement.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 1995–1997, October, 1995.     

Dawson型磷钼钒杂多酸催化合成1,3-二噁戊烷的研究

考察了Dawson型磷钼钒杂多酸和各种结构反应底物对1，3-二噁戊烷合成催化活性的影响．研究表明：H6P2Mo17VO62的催化效果最好，反应条件温和，环氧化物的转化率接近100％，1，3-二噁戊烷的选择性在90％以上。     

Profiling analysis of oligosaccharides in antibody pharmaceuticals by capillary electrophoresis

Carbohydrate chains in glycoprotein pharmaceuticals have important roles for the expression of their biological activities. Therefore, development of an assessment method for the carbohydrate chains is an important parameter for quality control of glycoprotein pharmaceuticals such as newly developed therapeutic antibodies. In this report, we applied capillary electrophoresis with laser-induced fluorescence detection to the analysis of carbohydrate chains after releasing with glycoamidase followed by derivatization with 3-aminobenzoic acid. We found that four major oligosaccharides present in antibody pharmaceuticals were successfully separated with good resolution. The present method showed good precision in both migration times and relative peak areas, and gave comparable accuracy with that using a derivatization method with 8-aminopyrene-1,3,6-trisulfonate.     

铽-聚二甲基硅氧烷配合物的荧光特性

用多种谱学方法证明聚二甲基硅氧烷(PDMS)中的氧原子能与Tb3+键合生成Tb3+和PDMS的配合物(Tb3+-PDMS), 并发现生成配合物后, PDMS和Tb3+的荧光发射同时得到增强. 荧光强度的增强与配合物中Tb3+含量有关, 当配合物中Tb3+的含量为2.0%(w)时, 配合物的荧光强度最大, 可增强1547%左右.     

Iridium Anodic Oxidation to Ir(III) and Ir(IV) Hydrous Oxides

Iridium oxide films (IROFs) are known to have an enhanced or the so‐called super‐Nernstian (<59 mV/pH) pH‐sensitivity. The intention in the present study was to find out the reasons of such behavior and also to elucidate the nature of iridium anodic oxidation processes. The methods employed were combined cyclic voltammetry and chronopotentiometry. Iridium layers of 0.1 to 0.2 μm thickness, deposited thermally on titanium or gold‐plated titanium substrates, were used for investigations. IROFs on the surface of working electrodes were formed anodically by applying a constant potential in deaerated and oxygen‐containing solutions of 0.5 M H₂SO₄, 0.1 M KOH and 0.5 M H₃PO₄+KOH. Linear pH‐dependences of the stationary open‐circuit potential with the slopes close to 59 mV/pH were found for iridium electrode oxidized at 0.4 V–0.8 V (RHE) in deaerated and at 0.8 V–1.2 V (RHE) in O₂‐containing solutions. They were attributed to reversible Ir/Ir(OH)₃ and Ir/ IrO₂?nH₂O metal‐oxide electrodes, respectively. It has been suggested that the main current peaks seen in the voltammograms of iridium electrode in acid and alkaline solutions are of different nature. The difference between iridium electrode surface states in acid and alkaline solutions has been presumed to be the main reason of super‐Nernstian pH‐sensitivity of the IROFs. On the basis of the results obtained standard potential of Ir/Ir(OH)₃ electrode and the solubility product of Ir(OH)₃ have been evaluated: =0.78±0.02 V and K_sp=3.3×10^?64.