Chemical synthesis of p-type nanocrystalline copper selenide thin films for heterojunction solar cells

Nanocrystalline thin films of copper selenide have been grown on glass and tin doped-indium oxide substrates using chemical method. At ambient temperature, golden films have been synthesized and annealed at 200 °C for 1 h and were examined for their structural, surface morphological and optical properties by means of X-ray diffraction (XRD), scanning electron microscopy and UV-vis spectrophotometry techniques, respectively. Cu_2−xSe phase was confirmed by XRD pattern and spherical grains of 30 ± 4 - 40 ± 4 nm in size aggregated over about 130 ± 10 nm islands were seen by SEM images. Effect of annealing on crystallinity improvement, band edge shift and photoelectrochemical performance (under 80 mW/cm² light intensity and in lithium iodide electrolyte) has been studied and reported. Observed p-type electrical conductivity in copper selenide thin films make it a suitable candidate for heterojunction solar cells.     

Investigation of sulfonated poly(ether ether ketone sulfone)/heteropolyacid composite membranes for high temperature fuel cell applications

The sulfonated poly(ether ether ketone sulfone) (SPEEKS)/heteropolyacid (HPA) composite membranes with different HPA content in SPEEKS copolymers matrix with different degree of sulfonation (DS) were investigated for high temperature proton exchange membrane fuel cells. Composite membranes were characterized by Fourier transfer infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). FTIR band shifts suggested that the sulfonic acid groups on the copolymer backbone strongly interact with HPA particles. SEM pictures showed that the HPA particles were uniformly distributed throughout the SPEEKS membranes matrix and particle sizes decreased with the increment of copolymers' DS. The holes were not found in SPEEKS‐4/HPA30 (consisting of 70% SPEEKS copolymers with DS = 0.8 and 30% HPA) composite membrane after composite membranes were treated with boiling water for 24 h. Thermal stabilities of the composite membranes were better than those of pure sulfonated copolymers membranes. Although the composite membranes possessed lower water uptake, it exhibited higher proton conductivity for SPEEKS‐4/HPA30 especially at high temperature (above 100 °C). Its proton conductivity linearly increased from 0.068 S/cm at 25 °C to 0.095 S/cm at 120 °C, which was higher than 0.06 S/cm of Nafion 117. In contrast, proton conductivity of pure SPEEKS‐4 membrane only increased from 0.062 S/cm at 25 °C to 0.078 S/cm at 80 °C. At 120 °C, proton conductivity decreased to poor 0.073 S/cm. The result indicated that composite membranes exhibited high proton conductivity at high temperature. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1967–1978, 2006     

Electrocatalytic activity of ordered intermetallic PtSb for methanol electro-oxidation

Ordered intermetallic PtSb had been synthesized by arc-melted and then sintering treatment. The electro-oxidation of liquid methanol on PtSb was investigated at room temperature by cyclic voltammetry and chronoamperometry. The results are compared to those at a polycrystalline platinum electrode surface. It was found that PtSb intermetallic was catalytically more active than pure platinum according to the onset potential and current density. X-ray diffraction (XRD) and XPS technologies had been used to investigate the crystal structure and electron effect.     

壳聚糖固体聚合物电池用膜

壳聚糖是甲壳素脱乙酰基的产物，具有良好的成膜性、生物相容性、环保以及价格低廉等特点。作为一种碱性高分子膜材料，近年来已成为聚电解质研究领域中的研究热点。本文综述了壳聚糖固体聚合物电池用膜的研究现状，其改性工艺主要包括共混、化学改性、质子酸掺杂、无机盐掺杂等方法，比较了各种工艺处理后壳聚糖固体聚合物电解质膜的性能差异，并就壳聚糖固体聚合物电解质膜中离子传导机理中有待解决的问题进行探讨，并提出了进一步改进壳聚糖固体聚合物电解质膜性能的研究思路。     

The recent progress of wide bandgap donor polymers towards non-fullerene organic solar cells

The recent progress of wide bandgap (WBG) donor polymers for non-fullerene polymer solar cells (NF-PSCs) were reviewed in detail, which was classified by D-type and D-A type molecular backbones to discuss the related structure-property correlations and put forward an outlook for future innovations.     

Effect of Ba and Bi doping on the synthesis and sintering of Ge-based apatite phases

Recently, high oxide ion conduction has been observed in the apatite-type systems La_9.33+x(Si/Ge)₆O_26+x/2, with conductivities approaching and even exceeding that of yttria-stabilized zirconia. The Ge-based phases have been reported to suffer from Ge loss and undergo irreversible structural changes on sintering at the high temperatures required to obtain dense pellets. In this paper we discuss doping studies (Ba, Bi for La) aimed at stabilizing the hexagonal apatite lattice to high temperature, and/or lowering the synthesis and sintering temperatures. The results show that doping with Ba helps to stabilize the hexagonal lattice at high temperatures, although Ge loss appears to still be a problem. Conductivity data show that, as previously reported for the Si-based systems, non-stoichiometry in the form of cation vacancies and/or oxygen excess is required to achieve high oxide ion conduction in these Ge-based systems. Neutron diffraction structural data for the fully stoichiometric phase La₈Ba₂Ge₆O₂₆ shows that the channel oxygen atoms show little anisotropy in their thermal displacement parameters, consistent with the low oxide ion conductivity of this phase. Bi doping is shown to lower the synthesis and sintering temperatures, although the presence of Bi means that these samples are not stable at high temperatures under reducing conditions.Presented at the OSSEP Workshop Ionic and Mixed Conductors: Methods and Processes, Aveiro, Portugal, April 10–12, 2003     

Nickel-cermet anode for fuel cells with the LSGM electrolyte

The effect of some technological parameters (firing temperature, thickness of an interphase layer made of solid electrolyte Ce_0.82Gd_0.18O_1.91 (GDC), the GDC electrolyte amount in nickel-cermet) on the electrochemical and electric properties of a nickel-cermet (Ni-GDC) anode intended for fuel cells with the La_0.88Sr_0.12Ga_0.82Mg_0.18O_2.85 (LSGM) electrolyte is studied. The polarization resistance of such an electrode is shown to hardly depend on the thickness of the interphase layer (4.5–23.5 μm) and the GDC electrolyte amount in nickel-cermet and to increase with the anode firing temperature. It is established that the contact resistance is concentrated in cells with the developed nickel-cermet electrode at the GDC/LSGM interface. At a temperature of 700°C the developed anodes may ensure a current density of 1 A cm^?2 at an overvoltage of less than 100 mV when using both moist hydrogen and a methane-oxygen mixture as the fuel.     

The Study of Anti-tumor Activity of Trichosanthin by Cyclic Voltammogram

IthasbeenreportedthatTrichosanthi11(TCS),isolatedfromrkiI-ilolt)ii,hasanti-tumorI-4andanti-vira1activities5-'.Someanti-tun1orremedies,whicharedesignedfromTCS,arebeingtestedanddeveloped'-.'.StudyingthebioIogicalphenomenonbyelectrochemicalmethodsisanewhotresearchspotemerginginrecentyears".Manyresultsshowedthatnotonlytheenzymesystemsuchassuccinatedehydrogenasedisplayedthediode-likebehaviorduringtheelectrontransferprocess",butalsothehigh1yorganizedorganeIle,forexample,mitochondria,andevenintac…     

Determination of phenol and catechol concentrations with oxygen probes coated with immobilized enzymes or immobilized cells

The enzyme phenol 2-hydroxylase was immobilized on Sepharose and used in conjunction with an O₂ electrode for quantitating phenol. Similarly, catechol 1,2-oxygenase was used for quantitating catechol. A third probe was prepared by immobilization ofTrichosporon cutaneum cells rather than purified phenol 2-hydroxylase for phenol quantitation. The whole cell system gave results comparable to the immobilized enzyme system.     

An alternative efficient redox couple for the dye-sensitized solar cell system

A series of new cobalt complexes [Co(LLL)(2)X(2)] were synthesized and evaluated as redox mediators for dye-sensitized nanocrystalline TiO(2) solar cells. The structure of the ligand and the nature of the counterions were found to influence the photovoltaic performance. The one-electron-transfer redox mediator [Co(dbbip)(2)](ClO(4))(2) (dbbip = 2,6-bis(1'-butylbenzimidazol-2'-yl)pyridine) performed best among the compounds investigated. Photovoltaic cells incorporating this redox mediator yielded incident photon-to-current conversion efficiencies (IPCE) of up to 80%. The overall yield of light-to-electric power conversion reached 8 % under simulated AM1.5 sunlight at 100 W m(-2) intensity and more than 4% at 1000 W m(-2). Photoelectrodes coated with a 2 microm thick nanoporous layer and a 4 microm thick light-scattering layer, sensitized with a hydrophobic ruthenium dye, gave the best results.