2-[6-Alkyl-3-hetaryl-4-oxo-9,10-dihydro-4H,8H-chromeno-[8,7-<Emphasis Type="Italic">e</Emphasis>][1,3]oxazin-9-yl]acetic acids

The interaction has been studied of a series of substituted 3-hetaryl-7-hydroxychromones with amino acids and formaldehyde (reactants ratio 1: 1: 2 respectively). In the case of glycine and Het = 3-isoxazolyl the product of aminomethylation at position 8 of the chromone was obtained, and with other Het (including Het = 4-phenyl-1,2,4-triazol-3-yl) 2-[6-alkyl-3-hetaryl-4-oxo-9,10-dihydro-4H,8H-chromeno[8,7-e][1,3]-oxazin-9-yl]acetic acids were formed. With β-alanine and Het = 4-phenyl-1,2,4-triazol-3-yl the corresponding β-substituted propionic acid was synthesized, but proline did not participate in the reaction, leading to bis(6-ethyl-3-hetaryl-7-hydroxychromon-8-yl)methane. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 5, pp. 683–689, May, 2007.     

The electronic structure of molecules by a many-body approach

The vertical valence ionization potentials of cyclopropane, ethylene oxide and ethylene imine are calculated by a many-body Green's function method. For C₃H₆ the ordering of the ionization potentials is 2e(), 1e(), 2a₁(), 1a₂(), 1e(). The assignment of the 2a₁ and the 1a₂ ionization potentials which has been controversial is thus clarified. The ordering is in agreement with the result obtained via Koopmans' theorem. For ethylene oxide and ethylene imine Koopmans' theorem fails in predicting the correct order of ionic states. For C₂H₄O the ordering of the ionization potentials is 2b ₁(), 4a ₁, 1a ₂(), 2b ₂,3a ₁, 1b ₁(), 1b ₂, 2a ₁ and for C₂H₅N 6a, 5a, 3a, 2a, 4a, 3a, 1a, 2a. The agreement of the computed ionization potentials with the experimental values is very satisfactory.     

Subsolidus phase relations and crystal structure of compounds in the PrOx-CaO-CuO system

The subsolidus phase relations of the PrO_x-CaO-CuO pseudo-ternary system sintered at 950-1000°C have been investigated by X-ray powder diffraction. In this system, there exist one compound Ca₁₀Pr₄Cu₂₄O₄₁, one Ca₂Pr₂Cu₅O₁₀-based solid solution, seven three-phase regions and two two-phase regions. The crystal structures of Ca₁₀Pr₄Cu₂₄O₄₁ and Ca₂Pr₂Cu₅O₁₀-based solid solution have been determined. Compound Ca₁₀Pr₄Cu₂₄O₄₁ crystallizes in an orthorhombic cell with space group D_2h²⁰−Cccm, Z=4. Its lattice parameters are a=11.278(2) Å, b=12.448(3) Å and c=27.486(8) Å. The crystal structure of Ca₂Pr₂Cu₅O₁₀-based solid solution is an incommensurate phase based on the orthorhombic NaCuO₂ type subcell. The lattice parameters of the subcell of the Ca_2.4Pr_1.6Cu₅O₁₀ are a₀=2.8246(7) Å, b₀=6.3693(5) Å, c₀=10.679(1) Å, and those of the orthorhombic superstructure are with a=5a₀, b=b₀, c=5c₀. The Ca_2.4Pr_1.6Cu₅O₁₀ structure can also be determined by using a monoclinic supercell with space group C_2h⁵−P2₁/c, Z=4, a=5a₀, b=b₀, and β=104.79(1)° or 136.60(1)°, V=5a₀b₀c₀.     

In-capillary micro solid-phase extraction and capillary electrophoresis separation of heterocyclic aromatic amines with nanospray mass spectrometric detection

A miniaturised technique to analyse and detect heterocyclic aromatic amines (HAs) using micro solid-phase extraction (SPE) coupled on-line (in-capillary) to capillary electrophoresis (CE) separation with nanospray (nESI) mass spectrometry (MS) detection has been developed. HAs are mutagenic and carcinogenic compounds formed at low levels in protein-rich food during cooking. Due to the low concentrations of HAs and the high complexity of the matrix in which they exist, sensitive and selective analytical methods are required for quantification. SPE was performed on a packed bed of C₁₈ particles inside the CE capillary, which minimised the dead volume. The on-line coupling of SPE, CE and nESI-MS reduced the time for extraction and identification to less than half an hour, which will allow for screening of several samples per day. The new technique provides short analysis time, low sample and solvent consumption, and HAs in standard solutions were easily detected at 12–17 fmol injections, and in spiked urine samples at 750–810 fmol injections.     

Recent syntheses and reactions of cyclic imidic esters

Δ²-Oxazolines and 4H-5,6-dihydrooxazines are readily obtainable from carboxylic acids and 2- or 3-amino alcohols by gas-phase dehydration, and 4H-dihydrooxazines can also be obtained by condensation of N-(hydroxymethyl) carboxamides with olefins. These cyclic imidic esters undergo reactions in which the ring is cleaved; these reactions include a new type of polymerization. The behavior of alkyl groups in position 2 and the cyclodditions in the 2,3-position also have been studied. Reactions in side chains on position 2 and addition experiments on the sulfur analogues of the cyclic imidic esters are also reported. A table shows the principal infrared bands of substituted Δ²-oxazolines.     

Components of <Emphasis Type="Italic">Artemisia pontica</Emphasis>

Chemical components from the aerial part of the Kazakhstan population of Artemisia pontica, from which the rarely encountered flavonoids 7-O-methyl- and 4′,7-di-O-methyl-esters of apigenin were isolated for the first time, were identified. The complete chemical composition of the essential oil was established using GC-MS.__________Translated from Khimiya Prirodnykh Soedinenii, No. 2, pp. 143–145, March–April, 2005.     

Sequential injection analysis for benzophenone-4 and phenylbenzimidazole sulphonic acid in sunscreen sprays by solid-phase extraction coupled with ultraviolet spectrometry

A sequential injection UV method was developed to determine benzophenone-4 (BZ4) and phenylbenzimidazole sulphonic acid (PBS) simultaneously, these being the most commonly used UV-filters in aqueous formulations used as sunscreen sprays. The selective elution of both was performed by on-line solid-phase extraction, by retention on a SAX microcolumn and separation by varying the pH of elution. The sensitivity obtained was 0.042±0.001 ml μg⁻¹ for PBS and 0.0159±0.0003 ml μg⁻¹ for BZ4. The limit of detection was 1.6 μg ml⁻¹ for PBS and 0.6 μg ml⁻¹ for BZ4. The R.S.D. of the results was 1-6% for PBS and 1-12% for BZ4. The method was validated using commercial sunscreen formulations with concentrations determined by a liquid chromatographic procedure. The two procedures gave comparable results. Automation of the method means the amount of reagents used and residues generated are decreased. The system allows the required analysis sequence to be programmed using suitable software.     

Synthesis and extraction properties of new chromogenic azo-calix[4]dibenzothiacrown ethers

Two novel chromogenic cone calix[4]dibenzothiacrown ethers 3 and 4 in which nitrophenylazo groups attached at the phenyl ring of dibenzothiacrown unit were described. The extraction properties of 3 and 4 toward different transition metal ions have been studied using conductometric technique and found to exhibit Cu²⁺ and Hg²⁺ selectivity with very high stability constants range from log K _assoc = 5.19 to log K _assoc = 8.72.     

Conversion of 3-benzoyl-1-methyl-4-phenyl-γ-piperidol by arylamines and arylhydrazines. Synthesis of 3-arylamino-1-oxo-1-phenylpropanes and 1,3-diarylpyrazoles and their fragmentation under electron impact

It has been established that on heating, 3-benzoyl-4-hydroxy-1-methyl-4-phenylpiperidine is ring-opened in the presence of arylamines by a type of retroaldol reaction, with subsequent transamination of the intermediate Mannich base and the formation of 3-arylamino-1-oxo-1-phenylpropanes. When using arylhydrazines this γ-piperidol is recyclized with the formation of 1,3-diarylpyrazoles and their 4,5-dihydro derivatives. The mass spectral behavior of a series of 3-arylamino-substituted 1-phenylpropanones has been studied. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1486–1495, October, 2007.     

Reactivity of FeVO4 towards MgMoO4 in the solid-state

A compound of the formula Fe₃Mg₂Mo₂V₃O₂₀ has been obtained as a result of a reaction between FeVO₄ and MgMoO₄ taken at a molar ratio of 3:2. This compound crystallises in the monoclinic system and its unit cell parameters are the following: a=0.6971 nm, b=0.9055 nm,c=1.2542 nm, g=102.00°, Z=2. This revised version was published online in July 2006 with corrections to the Cover Date.