微模塑法制备PMMA/SiO2二氧化硅杂化材料微结构

以摩尔比为 1∶1的甲基丙烯酸甲酯 (MMA)、甲基丙烯酸 (3 三乙氧基硅烷基 )丙酯 (ESMA)单体、0 .2 %(单体总量的质量分数 )的偶氮二异丁腈AIBN引发剂和四氢呋喃 (THF)溶剂 ,及 2 0 % (总质量分数 )的正硅酸乙酯TEOS合成出PMMA/SiO2 有机 无机杂化的杂化溶胶 .将溶胶在洗净的普通光学玻璃基片表面甩膜 .利用软刻蚀中的微模塑法 ,把有机硅弹性印章复制有精细图纹一面轻放在杂化溶胶膜上进行微模塑 ,外加 1N压力于12 0℃下处理 2h使溶胶凝胶化 .印章剥离后在基片表面就形成了PMMA/SiO2 有机 无机杂化材料的微图纹结构 .从微图纹的光学显微镜照片可以看出微模塑方法制备杂化材料复制的图纹精细度高 ,操作简单易行 ,是一类比较理想的微细图纹结构加工的方法 .     

The effect of voice lessons on the clinical and perceptual skills of graduate students in speech-language pathology

Two groups of 10 speech-language pathology graduate students were each given 7 weeks of singing lessons to determine whether voice lessons could have an effect on their clinical and perceptual skills. Pre-, mid-, and posttests to measure various skills were designed and implemented. With use of paired sample statistical testing, statistically significant results were obtained. In addition, the subjective responses of the students show that the lessons were effective in improving pitch perception, breath control, and legato production or easy onset. This study supports efforts to integrate curricula in vocal performance and speech-language pathology.     

Photodiffraction in InGaAs/InGaAsP multiple quantum wells enclosed in a microcavity

We report new results on the diffraction properties of photoinduced gratings in InGaAs/InGaAsP MQW structures. The original feature of this device is that the QWs are enclosed in an asymmetric Fabry–Perot microcavity in order to increase the diffraction efficiency. We observe oscillations in the diffraction efficiency due to resonant effects in the microcavity. The experimental spectra are compared with theory. Diffraction efficiency at 1.55 μm attains a maximum value of 2.7% at a write beam fluence of 260 μ J cm⁻², and then decreases at higher fluences. We explain this phenomenon by an absorption saturation at high excitation.     

用计算机测量PN结的反向物理特性

本对PN结反向物理特性，应用电子技术和计算机技术实现了对实验过程的控制和效据处理。     

F／Cl比与Eu~（2＋）：BaFCl中F色心的浓度和光激励截面的关系

研究了Ｅｕ（２＋）：ＢａＦｘＣｌ２在紫外线辐照下的光激励发光。通过改变激励方式及激励光的扫描方向，给出了Ｅｕ（２＋）：ＢａＦｘＣｌ２－ｘ光激励发光过程中，两种Ｆ色心的浓度比值与光激励截面比值的测定方法。利用这种测定方法，进一步研究了两种Ｆ色心的浓度比值和光激励截面比值与Ｆ／ＣＩ比值的关系。     

一类泛圈图

本文证明了如果G是2连通无爪图,G不是圈,n=|v(G)|>q,G的每个导出子图A都满足φ(a_1,a_2),且G中不存在W′作为其导出子图,则G是泛圈图。     

中国邮路问题的0-1规划解法

在用“奇偶点图上作业法”求解“中国邮路问题”时,需检查图中的每一个回路.当图中回路较多时,检查不便且易出错.针对此,本文建立了求解“中国邮路问题”的0-1规划模型,并给出了算例。     

Si1－xGex/Si量子阱发光材料的分子束外延生长及其结构研究

采用固源Si分子束外延,在较高的生长温度于Si(100)衬底上制备出Si1－xGex/Si量子阱发光材料。发光样品的质量和特性通过卢瑟福背散射、X射线双晶衍射及光致发光评估。背散射实验中观察到应变超晶格的反常沟道效应;X射线分析表明材料的生长是共度的、无应力释放的,结晶完整性好。低温光致发光主要是外延合金量子阱中带边激子的无声发射和横光学声子参与的激子复合。并讨论了生长温度对量于阱发光的影响。     

管节点疲劳裂纹扩展规律和寿命估算

对Ｔ型管节点的疲劳试验进行分析，研究疲劳裂纹的扩展规律，用“柔度法”计算应力强度因子范围ΔＫ，确定材料常数ｃ，ｍ，提出并运用“直线－曲线模式法”估算管节点疲劳寿命，结果与试验吻合，具有一定的实用参考价值。