Further studies on the rotational barriers of Carbamates. An NMR and DFT analysis of the solvent effect for Cyclohexyl N,N-dimethylcarbamate

The solvent effect on the Gibbs energy of activation for rotation around the (C=O)–N bond in cyclohexyl N,N-dimethylcarbamate was investigated by dynamic NMR spectroscopy and density-functional theory at the B3LYP/6-311+G^** level. The experimental barriers were about 15 kcal mol⁻¹ with no appreciable variation when the solvent polarity was changed. A reaction field model was applied to theoretically mediate the solvent effect and the results were comparable to the experimental data. An analysis, based on the Onsager solvation theory, showed that the solvent effect on rotational barriers can be understood employing the total molecular dipole moment, the difference between the dipole moments of the ground and the transition state structures, or both, as appropriate.     

Agreement between experiment and hybrid DFT calculations for O--H bond dissociation enthalpies in manganese complexes

Information on the accuracy of DFT functionals for redox reactions in transition metal systems is rather limited. To analyze the performance of some popular functionals for redox reactions in manganese systems, calculated O--H bond dissociation enthalpies for Mn-ligands in six different complexes are compared to experimental results. In this benchmark, B3LYP performs well with a mean absolute error of 3.0 kcal/mol. B98 gives similar results to B3LYP (error of 3.8 kcal/mol). B3LYP* gives lower O--H bond strengths than B3LYP and has a mean error of 5.0 kcal/mol. Compared to B98 and B3LYP, B3LYP* has an error trend for the manganese ligands that is more similar to the error for a free water molecule. The nonhybrid functional BLYP consistently and significantly underestimates the O--H bond strengths by approximately 20 kcal/mol. HCTH407 has a rather large mean error of 9.4 kcal/mol and shows no consistent trend. The results support the use of hybrid functionals and the present computational method for large model systems containing manganese. An example is the oxygen evolving complex in photosystem II where hybrid functionals predict the appearance of a Mn(IV)-oxyl radical before the O--O bond formation step.     

Structure of 4-[4-(Dimethylamino)-Phenylazo] Benzeneboronic Acid and Its Cyclic Esters with D-Glucose: A Computational Study

We present results from a computational study of 4-[4-(dimethylamino)-phenylazo] benzene boronic acid (DABBA) (the 4'-boronic acid isomer of the aminoazobenzene dye N,N-dimethylaminoazobenzene) and its associated anion, as well as, several cyclic esters formed from these azoborates and various conformers of D-glucose. Azo dyes that also contain one or more boronic acid functional groups are of practical importance in the development of chemical sensors for saccharide recognition because of their ability to induce a visible color change upon binding. The lowest-energy DABBA:D-glucose esters found in this investigation consistently involved at least one of the exocyclic hydroxymethyl groups on the D-glucose moiety rather than vicinal cis or trans diol arrangements of hydroxyl groups on the ring.     

SYNTHESIS AND CHARACTERIZATIONS OF NEAR INFRARED ABSORBING POLYMERS

A series of near infrared (NIR) absorbing dinuclear ruthenium dicarbonylhydrazine complexes (DCH-Ru),[{Ru(bpy)_2)_2μ-DCH]~(n ) (where bpy = 2,2'-bipyridinc and n = 2, 3 or 4), were prepared. The DCH-Ru complexes areelectrochromic in the NIR region with a high absorption coefficient at 1550-1600 nm typically over 10000 M~(-1)cm~(-1). DCH-Ru complex polymers with good NIR electrochromic properties were also obtained and processed to make a device foroptical attenuation at a wavelength of 1550 nm. The potential of these DCH-Ru polymers for use in a variable opticalattenuator has been demonstrated with an attenuating power at the 1550-nm telecommunication wavelength over 7.0 dB permicron of polymer film thickness. Other classes of NIR active materials are the pentacenediquinones and the correspondingpoly(ether pentacenediquinone)s. These polymers can be electrochemically reduced to the corresponding semiquinone(radical anion) having NIR absorption within a telecom window (e. g., 1310 nm).     

Synthesis and properties of organosoluble poly(amide imide imide)s based on tetraimide dicarboxylic acid condensed from 4,4′‐(hexafluoroisopropylidene)diphthalic anhydride, 4,4′‐oxydianiline,and trimellitic anhydride and various aromatic diamines

A novel tetraimide dicarboxylic acid was synthesized with the ring‐opening addition of 4,4′‐(hexafluoroisopropylidene)diphthalic anhydride, 4,4′‐oxydianiline, and trimellitic anhydride in a 1/2/2 molar ratio in N‐methyl‐2‐pyrrolidone followed by azeotropic condensation to tetraimide dicarboxylic acid. A series of poly(amide imide imide)s (PAIIs) with inherent viscosities of 0.8–1.1 dL/g were prepared from tetraimide dicarboxylic acid with various aromatic diamines by direct polycondensation. Most of the PAIIs were readily soluble in a variety of amide polar solvents and even in less polar m‐cresol and pyridine. Solvent‐cast films had tensile strengths ranging from 99 to 106 MPa, elongations at break ranging from 8 to 13%, and initial moduli ranging from 2.0 to 2.3 GPa. The glass‐transition temperatures of these PAIIs were recorded at 244–276 °C. They had 10% weight losses at temperatures above 520 °C in air or nitrogen atmospheres. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1092–1102, 2002     

Grid-free DFT implementation of local and gradient-corrected XC functionals

Following an approach to density functional theory calculations based on the matrix representation of operators, we implemented a scheme as an alternative to traditional grid-based methods. These techniques allow integrals over exchange-correlation operators to be evaluated through matrix manipulations. Both local and gradient-corrected functionals can be treated in a similar way. After deriving all the required expressions, selected examples with various functionals are given. Received: 7 March 1998 / Accepted: 21 May 1998 / Published on line: 6 August 1998     

Fluorenyl-containing sulfonated poly(aryl ether ether ketone ketone)s (SPFEEKK) for fuel cell applications

A series of fluorenyl-containing sulfonated poly(aryl ether ether ketone ketone)s (SPFEEKK) were synthesized via aromatic nucleophilic substitution polymerization. The sulfonation content (SC) was controlled by the feed ratios of sulfonated and nonsulfonated monomers. Flexible and strong membranes in the sulfonic acid form were obtained from cast membranes in the sodium salt forms by treatment with acid. The thermal properties, water uptake, swelling ratio, water state, oxidative stability, proton conductivity and methanol permeability were investigated. All the polymers had proton conductivities greater than 1 × 10⁻² S/cm at room temperature, and the conductivity values of m-SPFEEKK-80 and p-SPFEEKK-80 were up to 1.86 × 10⁻¹ and 1.78 × 10⁻¹ S/cm at 100 °C. This series of polymers also possessed good dimensional stability in water and low methanol crossover.     

Multi‐state multi‐reference Møller–Plesset second‐order perturbation theory for molecular calculations

This work presents multi‐state multi‐reference Møller–Plesset second‐order perturbation theory as a variant of multi‐reference perturbation theory to treat electron correlation in molecules. An effective Hamiltonian is constructed from the first‐order wave operator to treat several strongly interacting electronic states simultaneously. The wave operator is obtained by solving the generalized Bloch equation within the first‐order interaction space using a multi‐partitioning of the Hamiltonian based on multi‐reference Møller–Plesset second‐order perturbation theory. The corresponding zeroth‐order Hamiltonians are nondiagonal. To reduce the computational effort that arises from the nondiagonal generalized Fock operator, a selection procedure is used that divides the configurations of the first‐order interaction space into two sets based on the strength of the interaction with the reference space. In the weaker interacting set, only the projected diagonal part of the zeroth‐order Hamiltonian is taken into account. The justification of the approach is demonstrated in two examples: the mixing of valence Rydberg states in ethylene, and the avoided crossing of neutral and ionic potential curves in LiF. © 2005 Wiley Periodicals, Inc. Int J Quantum Chem, 2006     

Calorimetric study of cesium hexafluoroarsenate CsAsF<Subscript>6</Subscript> at elevated temperatures

Summary Cobalt(II), nickel(II) and copper(II) complexes of some aroylhydrazone Schiff’s bases derived from isoniazide (hydrazide of isonicotinic acid) with p-hydroxybenzaldehyde; 2,4-dihydroxybenzaldehyde or 2-hydroxy-1-naphthaldehyde are prepared and characterized. The study reveals that the ligands coordinate in the keto form. That transformed to the enol through the loss of HCl upon heating the solid complexes. The copper(II) complexes are thermochromic in the solid-state while the cobalt(II) complex, 3 of 2,4-dihydroxybenzaldehyde moiety is solvatochromic in hot DMF. The chromisms obtained were discussed in terms of change in the ligand field strength and/or coordination geometry.