催化反应热诱导激光光偏转分析法测定尿素

报道用催化反应热诱导激光光偏转法测定痕量尿素。发现将脲酶制成一定浓度的乙醇浓液能显著地增强激光光偏转信号强度。探讨了增强作用机理以及光偏转号强度与尿素浓度的关系，并应用于尿样中尿素含量的测定，结果满意。     

Instrumental barriers in biological Fourier transform infrared spectroscopy

Biological applications of infrared spectroscopy have pressed for ever greater instrumental capabilities in terms of spectral sensitivity and quantitative exactness. Improved instrumentation has provided measurement of many vibrational modes in biological samples that previously were lost in noise. With highly optimized sampling conditions, useful measurements have been made with a peak-to-peak noise level less than 5 microabsorbance (5×10^–6 absorbance), at 0.5 cm^–1 resolution. However, optical and instrumental instabilities often result in sine waves that are not totally removed by the ratio of sample to reference. These often limit effective spectral sensitivity to 50 or 100 microabsorbance, peak-to-peak, and constitute a non-random noise. Non-atmospheric absorptions, especially one at 1959 cm^–1 with 0.8 cm^–1 band width (FWHM) are reported. The latter is due to a trace impurity in the KBr beam splitter substrate and compensator plate. Improvements in instrumentation and sampling conditions are expected to yield measurements of absorption bands as small as 50 microabsorbance with excellent signal/noise.     

Electron beam pretreatment of sewage sludge before anaerobic digestion

The pretreatment of waste-activated sludge (WAS) by electron beam irradiation was studied in order to improve anaerobic sludge digestion. The irradiation dose of the electron beam was varied from 0.5 to 10 kGy. Batch and continuous-flow stirred tank reactors (CFSTRs) were operated to evaluate the effect of the electron beam pretreatment on anaerobic sludge digestion. Approximately 30–52% of the total chemical oxygen demand (COD) content of the WAS was solubilized within 24 h after electron beam irradiation. A large quantity of soluble COD, protein, and carbohydrates leached out from cell ruptures caused by the electron beam irradiation. Volatile fatty acids production from the irradiated sludge was approx 90% higher than that of the unirradiated sludge. The degradation of irradiated sewage sludge was described by two distinct first-order decay rates (k ₁ and k ₂). Most initial decay reaction accelerated within 10 d, with an average k ₁ of 0.06/d for sewage sludge irradiated at all dosages. The mean values for the long-term batch first-order decay coefficient (k ₂) were 0.025/d for irradiated sewage sludge and 0.007/d for unirradiated sludge. Volatile solids removal efficiency of the control reactor fed with unirradiated sewage sludge at a hydraulic retention time (HRT) of 20 d was almost the same as that of the CFSTRs fed with irradiated sludge at an HRT of 10 d. Therefore, disintegration of sewage sludge cells using electron beam pretreatment could reduce the reactor solid retention time by half.     

Decomposition of halogenated hydrocarbons using intense, penetrating bremsstrahlung

Radiolytic decomposition of chlorinated hydrocarbons and other toxic compounds has been experimentally measured using ionizing radiation produced by electron accelerator and nuclear isotope sources. Decomposition products have been identified. A portable, commercially available electron accelerator was set up at a Superfund site where vapor extraction wells were removing trichloroethylene (TCE) from a spill into the unsaturated soil. The extraction vapor was passed through the accelerator beam to decompose the TCE. On site radiolytic decomposition of TCE vapor using an accelerator is shown to be significantly less expensive than filtration of TCE vapor using activated charcoal.     

Design of a combined ozone/electron beam process for waste water and economic feasibility of the process

A design of a combined ozone/electron beam irradiation process for treating a 50 m³/h waste water stream from a molasses processing is discussed. Moreover, a cost evaluation of such a process in comparison to a conventional ozonation/biology treatment process has been performed to assess the potential of the irradiation process for technical use. Although the result of this comparison is not bad for the irradiation process an implementation into a full scale plant would not seem to be the thing to do in the present case.     

甲烷在Ni表面及La薄膜上激活解离化学吸附

利用分子束技术改变甲烷的平动能E_k来研究E_k及其法向分量E_n对甲烷在Ni表面及La薄膜上激活解离吸附的影响。对CH_4/Ni及CH_4/La系统, 当甲烷的平动能E_k分别低于58.5 kJ·mol~(-1)及52.3 kJ·mol~(-1)时, 没观察到甲烷的解离吸附。当甲烷的平动能超过此阈值时, 即对CH_4/Ni系统, 当Ek=58.5增至63.8 kJ·mol~(-1)时, 初始沾着几率s_0由0至0.54线性增加; 对CH_4/La系统, 当E_k=52.3增至63.8 kJ·mol~(-1)时, S_0由0至0.49线性增加。这些结果表明, 两个系统的化学吸附是不经过前趋态的直接化学吸附。最后求出CH_4/Ni, CH_4/La系统的表观活化能分别为46.8 kJ·mol~(-1)和38.1 kJ·mol~(-1)。     

Electron beam irradiated textile cellulose fibres.: ESR studies and derivatisation with glycidyl methacrylate (GMA)

Powdered samples of cotton, flax and viscose from textile fibres were subjected to electron beam irradiation (20-400 KGy). ESR signals were observed after irradiation. The intensity of the signals depended on the administered dose and exhibited an exponential decay with time. The ESR spectra, whose pattern depended drastically on the crystallinity of the samples, indicated the simultaneous presence of at least three carbon-centred radical species. When the whole irradiated textile fibres were quenched in a solution of glycidyl methacrylate (GMA) a significant increase of the weight was observed, the increase being strongly dependent on the administered dose and on the time interval elapsed between irradiation and quenching. Spectroscopic characterisation evidenced that GMA acted as cellulose radicals scavenger on the unsubstituted carbon of the double bond and was covalently linked to the fibre through a new C-C bond while maintaining unaltered the ester and the epoxide groups, available for further derivatisations. Because irradiation of the whole textile fibres in the range 20-200 KGy does not result in significant degradation of the material, GMA quenching of fibres irradiated in this dose range may represent an attractive route to their functionalisation.     

Mechanical properties of fiber reinforced styrene-butadiene rubbers using surface-modified UHMWPE fibers under EB irradiation

Aiming to develop a high performance fiber reinforced rubber of SBR, a special technique using electron beam (EB) irradiation-induced graft-polymerization was applied to ultra-high molecular-weight polyethylene (UHMWPE) fibers. Although UHMWPE is chemically inert, N-vinyl formamide (NVF) could be graft-polymerized onto the UHMWPE fiber surface with this special technique. A maximum grafting percentage of 23.6% was achieved. The composite of SBR and grafted UHMWPE fibers with maximum grafting indicated a linear increase in the initial modulus and strength with the fiber content. At the fiber content of 10%, the initial modulus was improved about five times with respect to that of the pure SBR, while the strength was done about twice. At this moment, only a small reduction could be observed in the strain compared with that of pure SBR. The fiber reinforced rubber with a good performance was obtained in the system of SBR and grafted UHMWPE fibers.     

Microstructural and physicochemical study of the buried Fe/AlGaAs(100) interface by transmission electron microscopy and x‐ray emission spectroscopy

Among the magnetic metal/semiconductor contacts, the Fe/GaAs system has been widely studied owing to its potential applications in electronic devices. In contrast, there are not many studies concerning the Fe/Al_xGa_1?xAs contact, and in particular there are no reports concerning the changes induced in the interfacial zone by the presence of Al. In this work, thin polycrystalline iron films were deposited by ion beam sputtering at room temperature on a 300 nm thick Al_0.25Ga_0.75As layer grown by molecular beam epitaxy onto GaAs(001). X‐ray diffraction analysis showed that the iron films are polycrystalline, and indications of a (002) texture of the film were observed. The fine scale analysis of the interface was achieved by high‐resolution transmission electron microscopy (HRTEM) observations, the results of which are compared with the physicochemical information obtained from electron‐induced x‐ray emission spectroscopy, by analysing the Al 3p valence states at the Fe/Al_xGa_1?xAs interface. The HRTEM experiments on cross‐section samples indicate that the interfacial zone between iron and AlGaAs is limited to <1.5 nm in thickness. X‐ray emission spectroscopy showed the presence of Al atoms in an FeAl‐like environment at the interface, and the existence of wrong bonds and point defects. The estimated width of the perturbed interface (2.0 ± 0.5 nm) is in agreement with the HRTEM results. Copyright © 2003 John Wiley & Sons, Ltd.     

Polarization of coherent synchrotron radiation from an electron beam rotating in a plasma

After eliminating reflections from the walls of the plasma container, we observed polarization of the coherent synchrotron radiation from a relativistic electron beam rotating in a plasma. Several features of the polarization agree well with calculations based on the single particle synchrotron radiation theory. A particular polarization ratio (Fig. 3) does not, however. We deduce from this direct diffraction of the radiation by the beam electrons. This is strong evidence for beam-particle bunches of size cm. Also, there must be some absorption of the extraordinary wave to account for the observations. We suggest a way to apply these results to measure the pitch angle of the beam.Work supported by Army Research Office.