9MeV行波直线加速器用四极透镜系统状态分析

 分析了大型海关集装箱检测系统用的9 MeV电子直线加速器的四极透镜系统变为斜四极透镜系统对束流聚焦特性的影响。对三单元四极透镜系统聚焦参数、制造和安装误差进行了分析，给出了参数选择方法和合理的误差要求。以上计算利用束流动力学程序TRANSPORT完成。     

Numerical simulation of a Gaussian beam profile passing through a Kerr medium

The circular Gaussian beam shape has been simulated by numerical evaluation on beam shape based on z-scan method through beam radius. This method is useful in many studies such as z-scan experiments. The validity of the relation between peak and valley separation in close aperture data and the diffraction length of the beam has been investigated by this method for some real cases. The results are in good agreement with the experimental studies.     

Total internal reflection–refraction beam expander

Beam expanders being used presently have complex structure and none is perfect. A novel beam expander is proposed first. The beam expander can magnify (or decrease) the diameter of incident laser beam according to the theory of total internal reflection–refraction (TIR-R) principle. The characteristic of the beam expander was studied by using ray-tracing method and computer simulation. The beam expander can propagate a parallel laser beam along the propagation axis and would not change the propagation direction of the beam. For a nonparallel beam the Lagrange invariant (the product of diameter and divergence angle) is not constant. This beam expander would be an effective device in some applications.     

钢筋混凝土双筋截面梁截面高度取值探讨

本文对钢筋混凝土双筋截面梁在满足抗弯、抗剪、抗震和变形要求下截高度取值进行了探讨，得出了简便的计算公式，以供同行参考。     

Biochip fluorescence detection system with spatial and spectral separation

A novel optical arrangement for fluorescence detection that employs spatial separation as well as spectral filter to increase the signal to noise ratio is proposed. Using a prism and two mirrors, the elliptical laser beam of a laser diode, as an excitation light, is homogenized and the transmitted excitation light is separated from the fluorescence not to reach the collecting optics. Uncooled CCD can capture the fluorescence image of up to 40 fluorescently-labeled protein patterns without scanning or mechanical translation. This paper presents the simulation, construction and measurement results of the developed optical system. The measurements show that the combination of prism and mirrors converts the excitation light from the laser diode to uniform illumination on the specimen, and provides the separation between excitation and fluorescence light to give high signal to noise ratio. It is also possible to assay various protein concentrations ranging from 1000 to 10 ng/ml reliably. We believe that the proposed fluorescence detection system can be used to build a commercially valuable, low cost, hand-held or miniature fast detection device for point-of-care applications.     

Reliable solutions to the problem of periodic oscillations of an elastoplastic beam

We consider time-periodic oscillations of a beam with a spatially inhomogeneous Prandtl–Ishlinskii constitutive law describing the elastoplastic hysteresis. The data (mass density, Prandtl–Ishlinskii distribution, external load) are assumed to be uncertain. It is shown that a unique solution exists and is stable with respect to the data variation. Considering the total dissipated energy as a measure for the accumulated material fatigue, we identify and estimate from above the ‘worst scenario’ case, where the dissipation over one period is maximal within an admissible set of data obtained from inaccurate measurements.     

On the dynamic behaviour of a flexible beam carrying a moving mass

The behaviour of a system containing a mass traveling on a cantilever beam is considered. The mass is induced to move by an applied force as opposed to the case which has been considered in most literature where the position of the moving mass is assumed to be known and independent of the motion of the beam. Furthermore, the system to be discussed has the unique characteristic that the motions of the mass and the beam are coupled. The mathematical model of the system includes two coupled nonlinear integral/partial differential equations which are impossible to solve analytically and are difficult to solve numerically in their original form. As a remedy, the solution is discretized into space and time functions and the equations of motion are reduced to a set of ordinary differential equations. The shape function is chosen so that it satisfies the boundary conditions of the beam as well as the transient conditions imposed by the traveling mass. This choice of the shape function, which considers the mass-beam interaction, provides an improvement over the conventional method of using a simple cantilever beam mode shapes.The ordinary differential equations of motion using the improved shaped functions, are solved numerically to obtain the dynamic behaviour of the system. The results illustrate the validity of the model, and demonstrate the advantages of the improved model to the un-improved equations.     

Experimental analysis of the steady-state behaviour of beam systems with discontinuous support

This paper deals with the experimental analysis of the long-term behaviour of periodically excited linear beams supported by a one-sided spring or an elastic stop. Numerical analysis of the beams showed subharmonic, quasi-periodic and chaotic behaviour. Furthermore, in the beam system with the one-sided spring three different routes leading to chaos were found. Because of the relative simplicity of the beam systems and the variety of calculated nonlinear phenomena, experimental setups are made of the beam systems to verify the numerical results. The experimental results correspond very well with the numerical results as far as the subharmonic behaviour is concerned. Measured chaotic behaviour is proved to be chaotic by calculating Lyapunov exponents of experimental data.

---

Sommario Il presente lavoro concerne l'analisi sperimentale del comportamento a regime di travi lineari, su supporti elastici nonlineari discontinui, eccitate periodicamente. L'analisi numerica dei sistemi in esame ha evidenziato risposte subarmoniche, quasi-periodiche e caotiche, nonchè l'esistenza, nel caso di trave con una molla laterale, di tre differenti percorsi verso il caos. La relativa semplicità dei sistemi di travi ha consentito di procedere ad una verifica sperimentale dei risultati numerici e della varietà dei fenomeni nonlineari da essi evidenziati. La corrispondenza fra risultati sperimentali e numerici è molto buona nel caso di risposta subarmonica. Il comportamento caotico sperimentale è stato convalidato attraverso il calcolo degli esponenti di Lyapunov a partire dai relativi dati.

     

CFETR中性束注入系统概念设计

为了满足中国核聚变工程实验堆(CFETR)对等离子体加热和电流驱动的要求,从总体布局、束传输 系统、束源系统三方面进行了中性束注入系统的概念设计。利用参数计算的方法,根据聚变等离子体的要求明确 了中性束注入系统的性能指标和基本布局;利用束传输空间分布程序评估了束传输性能,确定了各功能部件的空 间布局结构;在此基础上,确定了束源系统的性能指标和引出系统布局方式,结合当前研发进展,明确了束源的 基本技术方案。由此完成了中性束注入系统参数指标、束传输关键尺寸、束源性能指标等设计要求,为后续工程 设计奠定了基础。     

神龙一号电子束质心运动测量研究

 在强流直线感应加速器中,电子束质心位置的控制是一项重要技术,要达到较好的控制效果,前提是对电子束质心位置进行准确的测量和定位。针对具有时间分辨的电子束质心位置的测量和确定,介绍了测量实验系统的建立和数据处理两个方面的研究工作。该处理方法在实际应用时能够将电子束质心位置的误差控制在1～2个像素内。用高速分幅相机以10 ns的时间间隔、3 ns的曝光时间获得了神龙一号加速器在漂移段出口处的电子束质心运动情况。结果表明：束的质心主要在半径为0.5 mm的区域内运动,束斑直径dFWHM值分别为8.4,8.8,8.5,9.3和7.6 mm,测量结果可以为束的调控提供准确参数。