退火温度对钨中He相关缺陷演化影响的研究

本文通过离子注入向钨体中注入能量为100keV氦离子,并利用X射线衍射(XRD)以及慢正电子束分析(SPBA)手段研究了不同退火温度下氦在钨体中的行为以及相关缺陷的演化.实验结果表明:低温退火并未改变相关缺陷的类型,样品S参数的下降表明低温退火导致了缺陷浓度的降低;当退火温度达到700℃时,样品S-W参数线性分布的变化表明缺陷类型逐渐发生改变;随着退火温度的进一步升高,He相关缺陷的演化程度加剧并向更深处迁移.     

647W灯泵浦大功率连续Nd:YAG激光器

 报道了一台灯泵浦大功率连续Nd:YAG激光器。对影响大功率固体激光器模块输出功率和光束质量的主要因素进行了理论分析，并提出提高激光器效率的措施：对聚光腔的形状、结构和材料以及冷却方式，泵浦灯的参数和材料，激光晶体的参数和镀膜进行优化设计，采用径向固定的谐振腔镜。该灯泵浦YAG晶体棒总体电光转换效率为4%，光束质量为22mm·mrad，输出功率647W。     

RIBLL束流诊断

描述了兰州放射性离子次级束流线(RIBLL)上研制并安装使用的放射性束流(RIB)诊断装置的种类、结构、性能及在AIBLL上的位置和功能.重点叙述了以光纤为基础的几种诊断元件,它们探测效率高、响应时间快、制作容易、性能稳定.给出了RIB¹⁷N等高图,说明诊断装置辅助MBLL得到RIB的水平.     

干涉型复合腔激光束相干合成中分束器的相移特性研究

分析了采用分束器构建干涉型复合腔进行激光束相干合成的过程与原理.利用分束器的特征矩阵研究了分束时产生的反射与透射相移,得到了两束相干光经过分束器分束后进行相干叠加时相移满足的普适关系,从相移的角度解释了分束器一侧发生相长干涉时另一侧必然发生相消干涉这一现象.比较了分束器与光纤耦合器在激光束相干合成应用中的一些特性,并验证了所得相移关系式的正确性.     

具有时间分辨能力的强流电子束束剖面测量系统

 高能强流电子束的束参数测量是加速器研制过程中重要的一项测量工作,由于光学渡越辐射具有时间响应快、分辨率高等特点而被用于测量电子束的具有时间分辨能力的束剖面、发散角、能量等多个参数;通过电子束束参数的时间分辨测量则能够了解电子束产生、输运中的问题,非常有利于加速器的研究与调试。一种具有时间分辨能力的、利用光学渡越辐射进行高能强流电子束束斑测量的系统在中国工程物理研究院被建立起来,并在12 MeV LIA的电子束束斑的测量中用于电子束传输研究,该系统拍摄图像的间隔时间最小为10 ns,最小的曝光时间为3 ns,具有一次可以拍摄8幅图像的能力,并获得了12 MeV LIA约100 ns内相应的时间分辨的束斑变化情况,观察到了一些过去未观察到的现象,为加速器的研究提供了又一个新测试方法。     

Analysis of beam quality for the laser beams after spectral beam combining

The beam quality of the laser beams after spectral beam combining (SBC) has been analyzed in this paper. Based on the propagation model of the spectral beam combining system, the expression for the output field of an individual beam passing through the spectral beam combining system with lens aberration has been given and the intensity distribution of the combined beam has been studied by the principle of incoherent superposition. Consequently, according to the intensity second-order moments method, the M²-factor of the combined beam has been calculated and the effect of lens aberration on the characteristics of the combined beam has been analyzed quantitatively. It can be shown that the SBC system can improve the beam quality of laser array significantly, and the M²-factor of the combined beam passing through the ideal spectral beam combining system is almost the same as that of an individual beam. For the spectral beam combining system with lens aberration, the spherical aberration has greater effect on the off-axis beam than on the on-axis beam, and the beam quality of combined beam degrades with increase in lens aberration.     

从一个怪例看细长梁理论的基本假定

分别采用欧拉和铁木辛柯梁理论分析了均匀分布力偶作用下的两端固支等截面匀质细长 梁, 并通过ABAQUS有限元分析了一个实例, 验证了铁木辛柯梁理论分析的结果. 对比证明在 这种载荷及边界条件下即使细长梁, 也必须考虑剪切效应的影响.     

武汉轨道交通区间桥梁预应力简支梁上拱度的分析及质量控制

从理论和工程实践两方面论述轨道交通区间桥梁预应力简支梁的上拱度问题,并对弹性上拱度和徐变上拱度进行分析和比较。针对上拱度影响桥梁运营的问题,提出一些解决的途径。本文对轨道交通区间桥梁预应力梁的设计、施工和运营以及进一步发展大跨度简支梁或无碴整体道床均有一定的参考价值。     

Shearing effects on the breathing mechanism of a cracked beam section in bi-axial flexure

The main purpose of this paper is to complete the works presented by Andrieux and Varé (2002) and El Arem et al. (2003) by taking into account the effects of shearing in the constitutive equations of a beam cracked section in bi-axial flexure. The paper describes the derivation of a lumped cracked beam model from the three-dimensional formulation of the general problem of elasticity with unilateral contact conditions on the crack lips. Properties of the potential energy and convex analysis are used to reduce the three-dimensional computations needed for the model identification, and to derive the final form of the elastic energy that determines the nonlinear constitutive equations of the cracked transverse section. We aim to establish a relation of behavior between the applied forces and the resulting displacements field vectors, which is compatible with the beams theory in order to allow the model exploitation for shafts dynamics analysis. The approach has been applied to the case of a cracked beam with a single crack covering the half of its circular cross section.     

Design and fabrication of diffractive elements for laser material processing applications

Diffractive optical elements have an important role to play in the provision of process adapted beam shaping for laser-materials processing applications. The design techniques and dominant methods of fabrication are described for intra-cavity and external beam shaping diffractive elements fabricated in a variety of dielectric and metallic materials for use with a wide range of laser sources. Theoretical and experimental examples are given in each section.