Chemical thermodynamics

The curing of composition containing epoxy bond is complicated chemical and technological process where under temperature and pressure conditions a change of its structure occurs. The structure changes are possible to know by thermal methods as DSC, DTA, etc. and also by measurement of dielectrical response under the low frequency electrical field.     

Thermodynamic and Equilibrium Composition Analysis of Using Iron Oxide as an Oxygen Carrier in Nonflame Combustion Technology

1. Introduction The utilization of fossil fuels causes serious neg- ative impacts on the environment and human life. There are many pollutants such as SOx, NOx and CO2 emission produced from the combustion of coal, oil and natural gas. It has been known for more than 100 years that CO2 is a greenhouse gas and that the release of CO2 from fossil fuel combustion may affect the climate of the earth. In the last years the concern over the aspects of an increased release of greenhouse gases has…     

A self-assembly/disassembly two-photo ratiometric fluorogenic probe for bacteria imaging

A fluorogenic probe for bacteria imaging was reported. The binding with anionic bacterial surfaces disassembled the self-assembly probe to turn-on the fluorescence and shift pyrene monomer/excimer ratiometric signals.     

Analysis of terpenoic composition of conifer needle oils by steam distillation/extraction,gas chromatography and gas chromatography-mass spectrometry

Summary The essential oils of Estonian spruce and pine needles have been analysed by a combination of steam distillation/extraction, GC and GC-MS. According to their monoterpene composition Estonian pines belong to a high carene chemotype with monoterpenes representing up to 85% of total oil. Estonian spruce needle oil contains up to 70% of oxygenated terpenes and more limonene and 1,8-cineole than the same spruce species [Picea abies (L.) Karst.] from other localities.A total of 60 components were identified. Coefficients of variation describe the range of component contents in individual trees within the population.     

ATR-FTIR study of Bacillus sp. and Escherichia coli settlements on the bare and Al2O3 coated ZnSe internal reflection element

FTIR-ATR has been used for understanding the interaction between bacteria and surfaces in the adsorption progress.     

Repeatability and pattern recognition of bacterial fatty acid profiles generated by direct mass spectrometric analysis of in situ thermal hydrolysis/methylation of whole cells

Direct CI mass spectrometry profiling of fatty acid methyl esters (FAMEs) from in situ thermal hydrolysis/methylation (THM) of whole bacterial cells with tetramethylammonium hydroxide (TMAH) has been demonstrated as a potential method for real time and fieldable detection/identification of microorganisms. Bacillus anthracis (Ames), Yersinia pestis (Nair. Kenya), Vibrio cholerae (E1 Tor), Brucella melitensis (Abortus wild) and Francisella tularensis (LVS vaccine) were profiled by this method during a 10-month period. Repeatability of the in situ FAME data was calculated using one-way analysis of variance (ANOVA) and a t-test. Artificial neural network (ANN) and multivariate statistics of the FAME profiles were also compared for bacterial identification/classification. Equivalent results were obtained with a multivariate rule building expert system (MuRES) and the ANN. However, the ANN analysis required much less computer time and was deemed the best choice for this application. In situ THM FAME profiles of the bacterial samples provided comparable results with those obtained from the Microbial Identification System (MIDI) (Newark, DE) wet chemistry-gas chromatographic based system.     

COMPOSITION OF THE ESSENTIAL OIL OF Haplophyllum myrtifolium

The chemical composition of the essential oil ofHaplophyllum myrtifoliumBoiss., endemic to Turkey, was examined by GC/MS. Ninety-seven compounds were characterized with linalool (12.8%), -caryophyllene (10.3 %), and methyleugenol (5.9 %) as the main constituents.     

Composition of <Emphasis Type="Italic">Carlina acanthifolia</Emphasis> Root Essential Oil

The root of Carlina acanthifolia All. (Asteraceae) contained 1.0% of essential oil (expressed in g per 100 g of dried plant material). Using GC and GC/MS, nine components were identified (100% of total oil). The structure of benzyl 2-furylacetylene (carlina oxide), which is the principal component of the oil (91.5%), was spectrometrically identified. __________ Published in Khimiya Prirodnykh Soedinenii, No. 4, pp. 331–332, July–August, 2005.     

AN/St悬浮共聚体系中AN在水/油两相间分配及其对共聚物组成的影响

研究了丙烯腈/苯乙烯(AN/St)悬浮共聚体系中AN在水/油两相间的分配及其对AN/St共聚物组成的影响.结果表明,AN分配于水/油两相间,使油相AN的含量低于相同单体配料比的本体聚合,导致生成的AN/St共聚物组成偏离本体共聚.为了准确预测进而控制AN/St悬浮共聚物的组成,提出了在考虑AN相分配的基础上计算AN/St悬浮共聚物组成的模型.计算结果与实验值一致,计算中用到的油相实际竞聚率与本体聚合相同,但该悬浮聚合的表观竞聚率随水/油比的变化而发生较大改变.     

Comparison of gas chromatography-mass spectrometry and liquid chromatography-mass spectrometry for the determination of fatty and resin acids in paper mill process waters

A comparative study of the performance of liquid chromatography (LC)-atmospheric pressure chemical ionisation (APCI)-mass spectrometry (MS) and gas chromatography (GC)-mass spectrometry techniques for the determination of resin and fatty acids from paper mill process waters was carried out. These compounds are responsible for the high toxicity of paper mill effluents and little research has been carried out regarding their analysis using mass spectrometric techniques. To prove the usability of GC and LC-MS, 16 treated and untreated water samples of recycle, kraft and pulp paper mills were analysed and good agreement was observed as regards to compounds detected and corresponding concentrations. This paper also reports the limits of detection, recoveries, reproducibility, linearity and precision using the two methods. GC-MS presented better selectivity and lower detection limits (below 0.2 microg/l), but derivatization of the extracts and the short life of derivatives (12-24 h) made the technique tedious and prone to high variations. Although LC-APCI-MS presented coelution of the non-aromatic resin acids, it also showed good sensitivity (limits of detection <3 microg/l) and permitted the detection of resin and fatty acids at microg/l level. In addition, since samples could be directly injected to the chromatographic system, LC-APCI-MS was proven as a powerful technique for quick and unequivocal quality control during papermaking.