强流脉冲电子束作用下20钢的微观结构状态

 为了研究金属材料的超快变形行为,利用强流脉冲电子束（HCPEB）装置对20钢进行轰击,采用X射线衍射、光学显微镜及透射电镜等技术分析了受轰击样品的变形组织与结构。实验结果表明,强流脉冲电子束能够在材料表层诱发幅值为1 GPa量级的应力,快速的加热和冷却过程在近表层诱发了强烈的塑性变形,并在材料表层内形成了复杂的位错缠结结构和位错胞结构,同时还伴随位错圈等空位簇缺陷的形成,多次轰击导致局部区域形成纳米和非晶结构。HCPBE轰击诱发的幅值极大的应力和极高的应变速率而导致的整个原子平面的位移可能是非晶结构形成的关键原因。     

Microstructure change in deuterium implanted CLAM steel induced by electron irradiation

As Reduced Activation Ferritic/Martensitic (RAFM) steel is considered the primary candidate for use as a structural material in fusion power reactors,many countries are developing different kinds of RAFM.China is developing new CLAM (China Low Activation Martensitic) steel.The study investigates microstructural changes in CLAM steel implanted with deuterium ions induced by 1250 keV electron irradiation from R.T.to 873 K,and observes both the growth and shrinkage of the defect clusters produced by deuterium ...     

Carbide precipitates in solution-quenched PH13-8 Mo stainless steel: A small-angle neutron scattering investigation

This paper deals with the small-angle neutron scattering (SANS) investigation on solution-quenched PH13-8 Mo stainless steel. From the nature of the variation of the functionality of the profiles for varying specimen thickness and also from the transmission electron microscopy (TEM), it has been established that the small-angle scattering signal predominantly originates from the block-like metallic carbide precipitates in the specimen. The contribution due to double Bragg reflection is not significant in the present case. The single scattering profile has been extracted from the experimental profiles corresponding to different values of specimen thickness. In order to avoid complexity and non-uniqueness of the multi-parameter minimization for randomly oriented polydisperse block-like precipitate model, the data have been analyzed assuming randomly oriented polydisperse cylindrical particle model with a locked aspect ratio.     

Electrophoretic deposition of PVA coated hydroxyapatite on 316L stainless steel

Polyvinyl alcohol (PVA) coated hydroxyapatite was deposited onto a 316L stainless steel substrate by electrophoretic deposition. Deposition was carried out in a methanol suspension at pH 5.5 using a graphite rod as an anode. Parameters such as PVA concentration, deposition voltage and time were optimized to achieve a homogeneous, crack-free adhesive coating. Techniques such as X-ray diffraction and Fourier transform infrared spectroscopy were used to study the phase composition of the coated materials and the stability of hydroxyapatite in the presence of PVA.     

Influence of modification time and high frequency ultrasound irradiation on self-assembling of alkylphosphonic acids on stainless steel: Electrochemical and spectroscopic studies

Self-assembly of alkylphosphonic acids on stainless steel was investigated under different conditions. Four different alkylphosphonic acids exhibiting alkyl chain of various size were synthesized and studied: butylphosphonic acid (C4P), octylphosphonic acid (C8P), decylphosphonic acid (C10P), and hexadecylphosphonic acid (C16P). Electrochemistry experiments were extensively carried out in order to determine electrochemical surface blocking of adsorbed layers in function of grafting time. In term of surface blocking, an 8 h modification time was optimal for all alkylphosphonic acids. Longer immersion times lead to degradation of adsorbed layers. For the first time, grafting of C16P was studied under high frequency ultrasound irradiation. Interestingly, grafting process is highly accelerated under sonication and well-covering C16P modified substrates are obtained after 1 h of immersion under ultrasound irradiation. This would allow to elaborate high-quality alkylphosphonic acids modified samples within much shorter times. Water contact angles measurements and X-ray Photoelectrons Spectroscopy (XPS) confirmed presence of adsorbed alkylphosphonic acids on stainless steel surface. A very tight link between electrochemical blocking, surface hydrophobicity and species chemical grafting was established.     

Influence of oxidation time on semiconductive behaviour of thermally grown oxide films on AISI 304L

The oxide films formed on AISI 304L stainless steel at 300 °C in the oxidation time range between 2 and 4 h have been studied by photoelectrochemistry. Photocurrents were investigated as a function of the wavelength of the incident light and the electrode potential. The investigation allowed the determination of the semiconductive properties of the oxides. The oxide films showed n-type behaviour. A duplex structure of the oxide films has been suggested on the basis of the photocurrent spectra, with an internal oxide layer having an optical gap (E_g2 = 2.16-2.3 eV) depending on the applied potential and oxidation time, higher to that of the external oxide layer (E_g1 ≈ 1.9 eV). Significant variations in the amplitude of the photocurrent were detected as a function of the applied potential and the oxidation time.     

Selective role of bainitic lath boundary in influencing slip systems and consequent deformation mechanisms and delamination in high-strength low-alloy steel

We elucidate here the deformation behaviour and delamination phenomenon in a high-strength low-alloy bainitic steel, in terms of microstructure, texture and stress evolution during deformation via in situ electron back-scattered diffraction and electron microscopy. Furthermore, the selective role of bainitic lath boundary on slip systems was studied in terms of dislocation pile-up and grain boundary energy models. During tensile deformation, the texture evolution was concentrated at {1 1 0}<1 1 1> and the laths were turn parallel to loading direction. The determining role of lath on the deformation behaviour is governed by length/thickness (l/t) ratio. When l/t > 28, the strain accommodates along the bainite lath rather than along the normal direction. The delamination crack initiated normal to (0 1 1) plane, and become inclined to (0 1 1) plane with continued strain along (0 1 1) plane and lath plane. This indicated that the delamination is not brittle process but plastic process. The lack of dimples at the delaminated surface is because of lack of strain normal to the direction of lath. The delaminated (0 1 1) planes were associated with cleavage along the (1 0 0) plane.     

Dual beam method for laser welding of galvanized steel: Experimentation and prospects

Laser welding of zinc-coated steel sheets in lap configuration poses a challenging problem, because of the zinc vapours spoiling the quality of the weld. In continuation to the earlier work, the novel solution of dual laser beam method for lap welding of galvanized steel sheets is discussed here in view of the recently obtained observations and ensuing concerns. In this method the precursor beam cuts a slot, thus making an exit path for the zinc vapours, while the second beam performs the needed welding. The metallurgical analysis of the welds is encouraging showing absence of zinc in the welded area. In the current work on this technique, new experimental results have been obtained verifying the earlier observations. Along with this, the possibility of using a transversely split-up beam for the welding purposes with this approach is discussed and analyzed in this paper. This new technique is expected to be very useful in prospective industrial applications requiring higher welding throughput along with the needed quality.     

Densification behavior of gas and water atomized 316L stainless steel powder during selective laser melting

The densification during selective laser melting (SLM) process is an important factor determining the final application of SLM-part. In the present work, the densifications under different processing conditions were investigated and the densification mechanisms were elucidated. It was found that the higher laser power, lower scan speed, narrower hatch spacing and thinner layer thickness could enable a much smoother melting surface and consequently a higher densification.The gas atomized powder possessed better densification than water atomized powder, due to the lower oxygen content and higher packing density of gas atomized powder. A large number of regular-shaped pores can be generated at a wider hatch spacing, even if the scanning track is continuous and wetted very well. The densification mechanisms were addressed and the methods for building dense metal parts were also proposed as follows: inhibiting the balling phenomenon, increasing the overlap ratio of scanning tracks and reducing the micro-cracks.     

不锈钢管道低温溅射镀TiN薄膜技术

 设计了一套适用于加速器细长管道真空室的低温溅射镀TiN薄膜装置。利用该装置，对86 mm×2 000 mm的不锈钢管道真空室进行溅射镀TiN膜实验，并对镀膜实验结果进行分析，得到了适用于加速器管道真空室内壁溅射镀TiN膜的表面处理参数。样品测试结果表明：在压强为80～90 Pa、基体温度为160~180 ℃的镀膜参数下，不锈钢管道内壁获得的TiN薄膜最佳，薄膜沉积速率为0.145 nm/s。镀膜后真空室的二次电子产额明显降低。