硅烷化对NH3选择性催化还原NOx催化剂CuCe/BEA水热稳定性的促进作用

采用硅烷化改性NH₃选择性催化还原NO_x催化剂CuCe/BEA,以提高催化剂的水热稳定性。X射线衍射、扫描电子显微镜和²⁷Al核磁共振谱图等研究证实,硅烷化改性明显抑制BEA分子筛骨架中Si-O-Al键的水解,保持其结构完整,从而有效提高水热处理后CuCe/BEA的催化活性。氨气-程序升温脱附和原位漫反射傅里叶变换红外光谱研究结果表明,硅烷化改性的催化剂由于保持更完整的骨架结构能够形成更多的酸性位点。此外,氢气-程序升温还原和X射线光电子能谱测试表明,硅烷化改性有利于提高活性铜物种的分散性。因此,相比于CuCe/BEA催化剂,硅烷化改性的CuCeSi/BEA催化剂具有更多的酸性位点和高度分散的Cu物种,共同促进了催化剂的水热稳定性。     

吉西他滨类似物的设计、合成及体外抗肿瘤活性

吉西他滨是临床一线治疗恶性肿瘤的药物,但其4-位氨基(N4)易与脱氧胞苷脱氨酶(CDA)作用而失活,导致代谢稳定性差,严重影响了临床治疗效果。以吉西他滨为起始原料,经3步反应合成了N4保护的脂溶性吉西他滨衍生物(3a和3b),其结构经1H NMR,13C NMR和HR-MS(ESI)表征。体外活性测试结果显示:化合物3a对多种肿瘤细胞的抗增殖作用均强于临床药物吉西他滨(P<0.05)。酶稳定性实验结果表明:3a几乎不受CDA影响,代谢稳定性显著高于原药吉西他滨。     

钛及钛合金表面羟基磷灰石涂层结合强度及稳定性

钛(Ti)及其合金凭借优异的机械性能和良好的生物相容性,一直是骨和牙种植体的主要临床应用材料。由于钛及其合金自身的生物惰性,不易与周围骨组织进行快速的骨整合,因此其表面的生物活性有待进一步提高。羟基磷灰石(HA)是人体骨和牙齿的主要无机成分,具有良好的生物活性和生物相容性,受其力学性能的制约,常被作为涂层材料覆盖在钛基体表面,用以提高植入体的生物活性。但一直存在涂层与基体界面结合强度低和涂层力学稳定性差的问题,成为限制其临床广泛应用的主要因素。本文从涂层结构设计、成分设计及制备方法等方面,就国内外改善钛基底与HA涂层界面结合性能的研究现状和发展动态作一综述,为高性能钛植入体的制备和应用提供参考。     

数字比色分析法在大学本科化学实验中的应用*——铁-磺基水杨酸配合物稳定常数的测定

数字比色法是近年来发展起来的一种检测方法。“铁-磺基水杨酸配合物稳定常数的测定”是大学无机化学中的经典本科学生实验。将数字比色法应用于该学生实验并与常规的分光光度法分析结果进行了对比。首先,探究了数字比色法的数据采集,即照片拍摄条件的因素控制。其次,通过数据比较分析了数字比色法的应用特点。结果显示,数字比色法的灵敏度介于目视比色法与分光光度法之间。该方法对较小的颜色差异分辨能力不足而对比较明显的颜色变化区分能力较好。在本科实验教学中,将该方法应用于颜色变化梯度明显的化学反应体系可获得较好的分析结果。     

Preparation and Properties of Poly（ether ether ketone）/Carbon Nanotube Modified Polypropylene Janus Composite Separator北大核心CSCD

Lithium-ion batteries （LIBs）have attracted wide attention because of their broad prospects in electric vehicles. However,the safety problems and low multiplier performance of the commercial polyolefin separator limit their further development,due to the poor dimensional thermal stability and low electrolyte absorption rate. Poly（ether ether ketone）（PEEK）and carbon nanotube（CNT）are compounded to coat on polypropylene （PP） to prepare Janus composite separator （PP@C） through the phase inversion method. PP@C composite separator does not deform at 180 ℃ for 0. 5 h（only slight deformation）,illustrating excellent thermal stability. The electrolyte absorption rate of PP@C2 is 193. 8%. The electrolyte uptake rate of the PP@C2 composite membrane was 193. 8%,which was 64. 5% higher than the PP membrane,showing a superduper electrolyte permeability. As a result,the specific discharge capacity of LIBs assembled with PP@C2 composite separator is 157. 6 mA·h/g at 0. 2 C and 129. 8 mA·h/g at 2 C,showing good rate performance with the capacity recovery rate of more than 99%. This might be attributed to the ultra-high thermal stability of PEEK,the good affinity of the electrolyte,the high conductivity of CNT,as well as the uniform dispersion of Li+ ,so that the separator can have excellent electrochemical performance while improving safety. © 2022, Science Press (China). All rights reserved.     

A Chimeric DNA/RNA Antiparallel Quadruplex with Improved Stability

Nucleic acid quadruplexes are proposed to play a role in the regulation of gene expression, are often present in aptamers selected for specific binding functions and have potential applications in medicine and biotechnology. Therefore, understanding their structure and thermodynamic properties and designing highly stable quadruplexes is desirable for a variety of applications. Here, we evaluate DNA→RNA substitutions in the context of a monomolecular, antiparallel quadruplex, the thrombin-binding aptamer (TBA, GGTTGGTGTGGTTGG) in the presence of either K⁺ or Sr²⁺. TBA predominantly folds into a chair-type configuration containing two G-tetrads, with G residues in both syn and anti conformation. All chimeras with DNA→RNA substitutions (G→g) at G residues requiring the syn conformation demonstrated strong destabilization. In contrast, G→g substitutions at Gs with anti conformation increased stability without affecting the monomolecular chair-type topology. None of the DNA→RNA substitutions in loop positions affected the quadruplex topology; however, these substitutions varied widely in their stabilizing or destabilizing effects in an unpredictable manner. This analysis allowed us to design a chimeric DNA/RNA TBA construct that demonstrated substantially improved stability relative to the all-DNA construct. These results have implications for a variety of quadruplex-based applications including for the design of dynamic nanomachines.     

Oxygen permeation and phase structure properties of partially A-site substituted BaCo_(0.7)Fe_(0.225)Ta_(0.075)O_(3-δ) perovskites

Ba0.9R0.1Co0.7Fe0.225Ta0.075O3-δ(BRCFT, R = Ca, La or Sr) membranes were synthesized by a solid-state reaction. Metal cation Ca2+,La3+or Sr2+doping on A-site partially substituted Ba2+in BaCo0.7Fe0.225Ta0.075O3-δoxides, and its subsequent effects on phase structure stability, oxygen permeability and oxygen desorption were systematically investigated by XRD, TG-DSC, H2-TPR, O2-TPD techniques and oxygen permeation experiments. The partial substitution with Ca2+, La3+or Sr2+, whose ionic radii are smaller than that of Ba2+, succeeded in stabilizing the cubic perovskite structure without formation of impurity phases, as revealed by XRD analysis. Oxygen-involving experiments showed that BRCFT with A-site fully occupied by Ba2+exhibited good oxygen permeation flux under He flow, reaching about 2.3mL min-1 cm-2at 900 ℃ with 1 mm thickness. Of all the membranes, BLCFT membrane showed better chemical stability in CO2, owing to the reduction in alkalinity of the mixed conductor oxide by La doping. In addition, we also found the stability of the perovskite structure under reducing atmospheres was strengthened by increasing the size of A-site cation(Ba2+La3+Sr2+Ca2+).     

含磷聚酰亚胺纤维的制备及其力学与阻燃性能

采用廉价的三苯基氧膦和混酸合成了一种含磷二胺单体,二（3-氨基苯基）苯基膦氧(DAPPO)。在4,4′-二胺基二苯醚（ODA）、3,3′,4,4′-联苯四酸二酐（BPDA）和均苯四酸二酐（PMDA）聚合体系中引入该单体,制备含磷聚酰亚胺纤维。热失重分析（TGA）结果表明,聚酰亚胺纤维的热稳定性随含磷量的增加而明显提高。当n（DAPPO）：n（ODA）为7：93时,纤维的极限氧指数达到了43,说明纤维的阻燃性能显著提高。     

主链含酰亚胺环和炔基的聚酰亚胺型聚氨酯弹性体的合成及阻燃性能

以均苯四甲酸酐、 D,L-苯丙氨酸和1,4-丁炔二醇为原料合成了一种含有酰亚胺环和炔基的二醇, 并以其为扩链剂, 采用预聚体法, 与4,4-二苯基甲烷二异氰酸酯(MDI)和聚四氢呋喃醚二醇(PTMG)反应, 合成了不同硬段含量的主链含有酰亚胺环和炔基的热塑性聚酰亚胺型聚氨酯弹性体. 用红外光谱(FTIR)、 电子拉力机、 热失重分析(TG)、 广角X射线衍射(XRD)、 UL-94垂直燃烧和极限氧指数对聚酰亚胺型聚氨酯弹性体进行了表征. 结果表明, 这种聚氨酯呈现出无定形结构; 其拉伸强度随着硬段含量的增加而增大; 与传统的热塑性聚氨酯相比, 酰亚胺环和炔基改性的聚酰亚胺型聚氨酯弹性体的热分解过程非常缓慢, 呈现出较好的热稳定性; 不同硬段含量的聚酰亚胺型聚氨酯弹性体的UL-94垂直燃烧均达到V-2级别; 其极限氧指数随着硬段含量的增加而增大.     

磷酸修饰对纳米Fe2O3热稳定性及光催化性能的影响

通过溶液浸渍蒸干过程实现了磷酸对Fe₂O₃纳米粒子的表面修饰, 研究了磷酸修饰对纳米Fe₂O₃的热稳定性及光催化活性的影响. 结果表明, 磷酸修饰显著提高了Fe₂O₃的热稳定性, 主要归因于磷酸修饰在样品表面抑制了粒子之间的团聚生长. 同时, 在光催化降解气相乙醛和液相苯酚的测试中, 磷酸修饰后热处理温度为600 ℃的样品表现出了最佳的可见光催化性能, 这主要归因于该样品具有高晶化度、 小粒子尺寸及大比表面积, 并且适量的修饰有利于其光催化性能的提高.