Thermodynamic and Equilibrium Composition of Using Iron Oxide as an Oxygen Carrier Nonflame Combustion Technology Analysis in

本文介绍了一种新的燃烧体系--熔融盐循环热载体无烟燃烧技术。这种燃烧体系杜绝环境污染气体NOx和CO2的排放，可以实现真正零排放的目标。计算了以Fe2O3作为氧载体的无烟燃烧体系的热力学参数。用最小吉布斯自由能原则，分析了Fe2O3与CH4的平衡组成。分析表明，如果要想在产物中产生高纯度的CH4完全氧化产物CO2和H2O，Fe2O3与CH4必须达到高摩尔比，如果Fe2O3的量不足，就会产生较多的部分氧化产物如CO，H2甚至C     

化学复合镀Ni-P-PTFE镀层的组成分析

近年来化学复合镀技术在工业中应用日益广泛 ,本文运用ＳＥＭ、ＡＥＳ和ＸＰＳ等手段对用化学复合镀制得的Ｎｉ Ｐ ＰＴＦＥ镀层的结构和组分进行了分析 ,并就其耐腐蚀性能与前期得到的Ｎｉ Ｓｎ Ｐ[1 ] 、Ｃｕ Ｓｎ Ｐ[2 ] 、Ｎｉ Ｐ ＣｅＯ2 [3] 、Ｎｉ Ｐ ＳｉＯ2 [4] 镀层进行了比较 ,结果表明 :含量一定的ＰＴＦＥ(聚四氟乙烯 )的共存增强镀层的耐腐蚀性及镀层表面的润滑性。1　实验部分1 1　仪器日产Ｄ/ＭＡＸⅢＡ型Ｘ 射线衍射仪 ,铜靶 ,管压 2 5ｋＶ ,电流 1 0ｍＡ。国产ＪＪＣ 1型润滑湿角测量仪。美国ＰＥＲＫＩＮ ＥＬＭＥＲＰ…     

羟基铝溶液及铝交联蒙脱土的研究

本文用(27)~Al NMR法和8-羟基喹啉萃取法分别研究了羟基铝溶液中十三聚铝含量的变化规律,还用X-射线衍射法研究了铝交联蒙脱土d_(001)的变化。研究结果表明,铝离子的聚合情况主要由羟铝比决定,而浓度影响不大。随着羟铝比的增加,溶液中单核铝离子含量减少,十三聚铝离子相对含量增加,所得铝交联蒙脱土的d_(001)也随之增大。参照这些变化规律、控制羟基铝溶液的组成,可以制备各种层柱状铝交联蒙脱土复合物。     

SUPERCRITICAL-PHASE PROCESS FOR SELECTIVE SYNTHESIS OF HEAVIER HYDROCARBONS FROM SYNGAS OVER ARu/Al_2O_3 CATALYST

在Ｒｕ／Ａｌ２Ｏ３催化剂上进行了超临界条件下的固定床费托合成。研究了催化剂孔尺寸、α－Ｃ１４烯共进料和反应温度对费托合成产物分布的影响     

Sorption of alkali metals and silver nitrates from binary and multicomponent solutions by a crown-containing polymer

The equilibrium in the systems containing a polymer based on dibenzo-18-crown-6 and binary or multicomponent aqueous solutions of NaNO₃, KNO₃, RbNO₃, and AgNO₃ was studied. The constants of the sorption of the individual electrolytes from solution into the polymer were determined. Preliminary calculations of the phase composition on sorption of 11 mixtures of electrolytes with a common anion from the data on the equilibria in the systems with one electrolyte are possible.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 464–466, March, 1993.     

CuO／CeO2和CuO／Al2O3催化剂的催化性能

本文以ＣＯ氧化为模式反应考察了ＣｅＯ２和Ａｌ２Ｏ３负载氧化铜催化剂的氧化活性，运用ＸＲＤ和ＴＰＲ技术研究了催化剂的还原性能和物相结构，结果表明：载体性质对负载ＣｕＯ催化剂的ＣＯ氧化活性有很大影响，ＣｕＯ／ＣｅＯ２催化剂活性明显高于ＣｕＯ／Ａｌ２Ｏ３催化剂．催化剂的还原特性随载体不同而不同．同时发现，热处理对催化剂铜物种的存在形式，晶粒大小、还原特性及其催化活性有明显影响，ＣｕＯ／Ａｌ２Ｏ３催化剂活性下降的主要因素是生成了活性较低的ＣｕＡｌ２Ｏ４相，而ＣｕＯ／ＣｅＯ２催化剂活性下降是由于ＣｕＯ和ＣｅＯ２发生烧结，晶粒变大     

Thermal decomposition kinetics of titanium hydride and Al alloy melt foaming process

Metal foams, now one of research foci, are a newclass of materials with low densities and novel physi-cal, mechanical, thermal, electrical and acoustic prop-erties[1—8]. Demands from high-tech make Al alloyfoam, which has much higher specific strength than ofpure Al foam, the new development focus[9—11]. Melt foaming process is one of the approaches tofabricate Al foam and Al alloy foam and their porestructure (pore diameter and porosity) has close rela-tionship with the thermal decompo…     

Analysis of terpenoic composition of conifer needle oils by steam distillation/extraction,gas chromatography and gas chromatography-mass spectrometry

Summary The essential oils of Estonian spruce and pine needles have been analysed by a combination of steam distillation/extraction, GC and GC-MS. According to their monoterpene composition Estonian pines belong to a high carene chemotype with monoterpenes representing up to 85% of total oil. Estonian spruce needle oil contains up to 70% of oxygenated terpenes and more limonene and 1,8-cineole than the same spruce species [Picea abies (L.) Karst.] from other localities.A total of 60 components were identified. Coefficients of variation describe the range of component contents in individual trees within the population.     

COMPOSITION OF THE ESSENTIAL OIL OF Haplophyllum myrtifolium

The chemical composition of the essential oil ofHaplophyllum myrtifoliumBoiss., endemic to Turkey, was examined by GC/MS. Ninety-seven compounds were characterized with linalool (12.8%), -caryophyllene (10.3 %), and methyleugenol (5.9 %) as the main constituents.     

以催化油浆窄馏分为添加剂的Al－MCM－41分子筛的合成

 采用阳离子表面活性剂十六烷基三甲基溴化铵为模板剂，以正硅酸乙酯为硅源，以硫酸铝为铝源，水热合成了以催化油浆窄馏分为添加剂的高比表面积Al－MCM－41介孔分子筛，并利用XRD，HREM，TG－DTA及N2吸附－脱附等测试手段对合成样品进行了表征．合成的Al－MCM－41分子筛的比表面积和孔体积分别达到1295m2／g和1．5cm3／g，其平均孔径为4．3nm．重点研究了Al－MCM－41分子筛结晶度、晶胞参数、比表面积、孔体积及平均孔径等结构性质随催化油浆窄馏分添加量及其组成的变化规律，并从合成机理上进行了解释．