Pt/CeO2/Al2O3催化剂对乙醇的催化作用

采用改进柠檬酸络合法制备了不同CeO2含量的三相共生Pt/CeO2/Al2O3催化剂,使用XRD对催化剂做了物相分析,并探索了其对乙醇在无氧条件下的催化活性。结果表明,随CeO2含量的增加,共生的Pt,CeO2和γ-Al2O3三相分布更加均匀。当CeO2的含量在40%,温度为550℃,气体空速为8 160 h-1时,乙醇转化率最高,正丁醛和苯的选择性达到最大,分别为34.05%和21.27%。     

SUS441不锈钢/Al金属间化合物微叠层复合板的界面结构与力学性能

采用“表面预处理—交替层叠—热轧复合—热处理”的工艺流程制备了SUS441不锈钢/Al金属间化合物微叠层复合板。利用光学显微镜、X射线衍射仪、扫描电子显微镜等检测与表征方法研究了热处理温度对复合板界面形貌、微观组织、物相组成、维氏硬度、拉伸性能的影响。结果表明：复合板界面结合良好;热处理后,固–液反应界面氧化严重,易导致界面分层而开裂;固–固、固–半固、固–液热处理后,金属间化合物层由均匀层和两相层组成,均匀层的物相组成为Fe₂A1₅,两相层的物相组成为Fe₄Al₁₃和Al₁₃Cr₂,且两相层具有韧性特征,固–半固反应所得到的复合板的综合力学性能最佳。     

Bioactive materials for bone regeneration based on zinc-modified hydroxyapatite

1. Download : Download high-res image (167KB)
2. Download : Download full-size image

     

超高强度钢（35CrNi3Mo）化学成分标准物质研制

采用与超高强度钢,台炼过程相同的工艺制备了35CrNi3Mo化学成分标准物质。对标准物质的制备技术、均匀性检验、稳定性考察进行了分析。研制的35CrNi3Mo化学成分标准物质具有良好的均匀性和稳定性。采用8家实验室进行协作定值,对定值结果的不确定度进行评定,各组分定值结果的相对扩展不确定度小于13％。     

Preparation of Mg–Al hydrotalcite from the effluent of Friedel–Crafts reaction and its application as a catalyst in Knoevenagel reaction

Abstract

Hydrotalcite containing magnesium and aluminium (Mg–Al HT) with a molar ratio of Mg(II)/Al(III) = 2.5 has been prepared by a co-precipitation method using the effluent of a Friedel–Crafts acylation reaction. The HT was calcined at 500°C and reconstructed with deionized water. The synthesized HT was characterized by XRD and FT-IR spectroscopy and was successfully used as a catalyst in the Knoevenagel reaction of aldehydes and active methylene compounds. The catalyst was found to be reusable.     

Study of the effect of laser treatment on the initial oxidation behaviour of Al‐coated NiCrAlY bond‐coat

In this study, the initial oxidation behaviour of laser‐treated Al/NiCrAlY bond‐coat is investigated. Two approaches, (i) Al film sputtering on the surface of bond‐coat and (ii) laser treatment, have been taken to enhance the oxidation resistance of NiCrAlY bond‐coat. Experimental results showed that after laser treatment, the Al/NiCrAlY bond‐coat exhibited a columnar dendritic microstructure without cracks and voids. A dense and continuous α‐Al₂O₃/Cr₂O₃ multilayer was found to form on the bond‐coat surface. Results on the cyclic oxidation at 1200 °C (for time ≤ 204 h) revealed that the laser‐treated Al/NiCrAlY bond‐coat exhibited better oxidation resistance compared to as‐sprayed NiCrAlY, Al/NiCrAlY and laser‐remelted NiCrAlY bond‐coat. The formation of θ‐Al₂O₃, NiO, Cr₂O₃ and NiCr₂O₄ spinel oxides was observed to be suppressed due to the preformed α‐Al₂O₃ scale during initial oxidation on the surface of laser pre‐oxidized Al/NiCrAlY bond‐coat. Copyright © 2013 John Wiley & Sons, Ltd.     

MgCl_2-KCl-AlF_3-(La_2O_3)熔盐体系电解制备Al-Mg-La中间合金

在质量比为41.5∶48.5∶10的MgCl_2-KCl-AlF3熔盐体系中加入质量分数为0.6%La_2O_3,利用电解法制备了Al-Mg-La合金.用ICP-OES(电感耦合等离子体光谱仪)和XRD进行了合金的组成和物相分析.研究结果表明,在电解温度800℃,阴极电流密度6.92A/cm2,槽电压5.3~5.4V,电解时间为1h的条件下,电流效率为86.2%,得到的合金主相为α-Mg基体、β-Al12Mg17相与Al11La3相.高的阴极电流密度有利于合金中镁含量的增加.     

Effect of calcination temperature on structure and characteristics of calcium oxide powder derived from marine shell waste

Marine fishery wastes such as bivalve shells, crab shells and cuttlebone are rich in calcium. Calcium carbonate derived from these materials can be transformed into calcium oxide by calcination, which is used in a wide variety of applications (e.g., biomaterials for bone and teeth implants and drugs). In this study we analyze the effects of calcination temperatures (550 °C, 700 °C and 900 °C) on characteristics and elemental composition of calcium oxide derived from shells of four marine species collected in Thailand: oyster (Saccostrea cucullata), green mussel (Perna viridis), blue swimming crab (Portunus pelagicus), and cuttlefish (Sepia brevimana). The XRD patterns indicated the complete transformation of calcium carbonate into calcium oxide, observed by the changes of diffraction angles at 900 °C for all calcined samples, except cuttlebone, which was calcined successfully at 700 °C. Likewise, the FT-IR results revealed changes of functional groups at the same calcination temperatures. In addition, ICP-OES showed the effects of calcination temperature on elemental contents: major elements (Ca, P and K) increased in all samples, and some minor elements increased in blue swimming crab shell (Zn and Cu) and oyster shell (Fe) as a result of increasing the calcination temperature. This study demonstrates the optimum calcination temperature of calcium oxide production from four types of marine wastes that might be benefit for the chemical compound production industry.     

Interspecific Variation between the American Quercus virginiana and Mediterranean Quercus Species in Terms of Seed Nutritional Composition,Phytochemical Content,and Antioxidant Activity

This study aimed to evaluate a complete nutritional composition in the seeds Quercus virginiana to compare this nutritional composition with three Mediterranean Quercus species. We analyzed the seed morphometry, proximate composition, phytochemicals, and antioxidant capacity. The seed of Q. virginiana presented the smaller seed size and weight, while Q. suber presented the highest values. Moreover, Q. virginiana seeds showed the highest amounts of sugar and total lipids, digestibility, energy, palmitic acid, and stearic acid. On the other hand, Q. virginiana seeds showed the lowest values of linoleic acid. Moreover, Q. coccifera seeds presented the highest total phenolics and flavonoids contents and antioxidant activity. The clustering analysis revealed a significant similarity in seed morphometry and nutritional composition between the Mediterranean Q. ilex and Q. suber, grouping with the American Q. virginiana, but to a considerable distance; by contrast, the Mediterranean Q. coccifera was the most distant in the clustering analysis. The content of phenolics and flavonoids and digestibility value were the variables that contributed to the separation to a greater extent in the clustering of the four species. The nutritional and biological activity assessment of plant seed may be considered as an essential mission to find new sustainable sources and novel chemical agents. In this sense, Quercus seeds may be an alternative and a competitive food source for the agri-food industry.     

Alkali treatment of lignocellulosic fibers extracted from sugarcane bagasse: Composition,structure, properties

Lignocellulosic fibers extracted from sugarcane bagasse were treated with NaOH solutions of different concentration (0-40 wt%) to study the effect of alkali treatment on the composition, structure and properties of the fibers. Composition was determined by the van Soest method, structure was characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM), while mechanical properties by tensile testing. Hemicellulose and lignin content decrease, while cellulose content goes through a maximum as a function of alkali concentration. Crystallinity changes only slightly and microfibril angle (MFA) remains constant thus structural effects and especially MFA are not the primary reasons for changing properties. The Young's modulus of the fibers shows a slight maximum at around 2-4 wt% NaOH content, while tensile strength goes through a much more pronounced one at around 5-8 wt%. Direct correlation between structure and mechanical properties was not found indicating that composition is more important in the determination of properties than structure. Regression analysis proved that the combination of several compositional variables determines mechanical properties in a non-linear manner. The improvement in fiber properties was explained with the dissolution of weak amorphous fractions and the relative increase of cellulose content.