Reconsideration on Homogeneous Quadratic Riemann Boundary Value Problem

The homogeneous quadratic Riemann boundary value problem (1) with Hoelder continuous coefficients for the normal case was considered by the author in 1997. But the solutions obtained there are incomplete. Here its general method of solution is obtained.     

Mechanical Design and Research on Process of Air Suction Drawing System of Spunbonded Nonwoven

The design guideline for the air suction drawing system with auxiliary air was analyzed, a spunbonding nonwoven system named PADHL1 - 3200 was designed and polypropylene （PP） spunbonded nonwoven fabrics with excellent properties were achieved after many trial runs. On the other hand, the suction air velocity （VA） was calculated and the influence of VA on the bonding strengh of PP nonwoven fabrics was Studied as well. It was found that VA is 1.5 - 2.5 times of the spinning velocity. With the increase of VA, PP fibers become finer and the bonding strength of PP nonwoven fabrics increases as well.     

A novel tridentate nitrogen donor as ligand in copper catalyzed ATRP of methyl methacrylate

A tridentate ligand, BPIEP: 2,6‐bis[1‐(2,6‐diisopropyl phenylimino) ethyl] pyridine, having central pyridine unit and two peripheral imine coordination sites was effectively employed in controlled/“living” radical polymerization of MMA at 90°C in toluene as solvent, Cu^IBr as catalyst, and ethyl‐2‐bromoisobutyrate (EBiB) as initiator resulting in well‐defined polymers with polydispersities M_w/M_n ≤ 1.23. The rate of polymerization follows first‐order kinetics, k_app = 3.4 × 10^?5 s^?1, indicating the presence of low radical concentration ([P*] ≤ 10^?8) throughout the reaction. The polymerization rate attains a maximum at a ligand‐to‐metal ratio of 2:1 in toluene at 90°C. The solvent concentration (v/v, with respect to monomer) has a significant effect on the polymerization kinetics. The polymerization is faster in polar solvents like, diphenylether, and anisole, as compared to toluene. Increasing the monomer concentration in toluene resulted in a better control of polymerization. The molecular weights (M_n,SEC) increased linearly with conversion and were found to be higher than predicted molecular (M_n,Cal). However, the polydispersity remained narrow, i.e., ≤1.23. The initiator efficiency at lower monomer concentration approaches a value of 0.7 in 110 min as compared to 0.5 in 330 min at higher monomer concentration. The aging of the copper salt complexed with BPIEP had a beneficial effect and resulted in polymers with narrow polydispersitities and higher conversion. PMMA obtained at room temperature in toluene (33%, v/v) gave PDI of 1.22 (M_n = 8500) in 48 h whereas, at 50°C the PDI is 1.18 (M_n = 10,300), which is achieved in 23 h. The plot of lnk_app versus 1/T gave an apparent activation energy of polymerization as (ΔE^≠_app) 58.29 KJ/mol and enthalpy of equilibrium (ΔH⁰_eq) to 28.8 KJ/mol. Reverse ATRP of MMA was successfully performed using AIBN in bulk as well as solution. The controlled nature of the polymerization reaction was established through kinetic studies and chain extension experiments. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4996–5008, 2005     

Synthesis and refractive‐index control of fluoropolymers by the polyaddition of bis(epoxide)s and triazine di(aryl ether)s

The polyaddition of fluorine‐containing bis(epoxide)s and fluorine‐containing triazine di(aryl ether)s were examined to give the corresponding fluorine‐containing poly(cyanurate)s. It was observed that the synthesized fluoropolymers had good thermal stabilities and good film‐forming properties. The glass transition temperatures (T_g's) and refractive‐indices (n_D's) of synthesized polymers were determined by differential scanning calorimetry and ellipsometry, respectively, and it was found that the values of T_g's and n_D's were supported by their fluorine containing ratios and skeletons. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4421–4429, 2007     

浅析营业杠杆系数及其经济应用

本文介绍了营业杠杆系数这一衡量企业经营风险的重要指标，对该指标的特性进行了较深入的分析和探讨。同时，还导出了利用该指标判断企业经营安全状态的方法。     

图的直积和字典积的Laplacian谱和Kirchhoff指数

由图G1、G2的Laplacian谱得到了它们的直积G1×G2和字典积G1[G2]的Laplacian谱,并计算了R(G1×G2)和R(G1[G2]).     

脂肪腈结构与凝聚型性能之间定量关系的研究

借助于分子拓扑学探讨了脂肪腈的凝聚型性能与分子结构之间的关系，提出一个结构基础明确的定量关系式．对乙腈到二十一烷腈的计算结果表明，沸点、密度和折光指数的计算值都很接近实验值．应用这一定量关系，不仅能够合理表征脂肪睛结构与凝聚型性能的关系，而且有助于揭示物质结构与性能关系之间的奥秘。     

统计因素分析法刍议

本文主要就统计因素分析法中不变因素的固定时期问题．提出了“先变因素和后变因素”的观点，从而对统计指数理论难以解释的问题．变得较为容易处理。     

结构在地震作用下的损伤评估方法

建筑结构应该能够承受一定地震运动的作用，同时也应该允许其产生一定的损伤。对于结构在地震作用下的损伤评估有多种的方法。本文将分别对从累积损伤方面、变形方面、变形和累积损伤的总和方面、刚度退化方面得到的损伤模型的特点进行评述。     

Cyclic cohomology and algebra extensions

We construct a spectral sequence to study cyclic cohomology for an extension A = R/I of algebras. When R is a free algebra we describe the cyclic cohomology of A in terms of traces defined on R or powers of I. Explicit cyclic cocycles representing the cyclic cohomology class belonging to the trace are constructed as analogues of Chern character and Chern-Simons forms.Dedicated to Alexander Grothendieck