粉状活性炭再生工艺研究

采用回转炉加热再生法 ,对粉状炭进行了再生实验 ,确定了再生工艺条件 :再生温度 85 0°C ,再生时间6 0min ,水蒸汽用量占原料量 30 % ,使废炭吸附能力恢复 10 0 % ,得率 70 %以上。     

Surface modification by graphene oxide:An efficient strategy to improve the performance of activated carbon based supercapacitors

An efficient and cost-effective strategy to modificate the surface of active carbon (AC), form a 3D-conductive network, and therefore improve the electrochemical performance of AC based supercapacitor was developed.     

多孔活性自燃金属的光谱辐射特性研究

多孔活性金属材料因为内部存在大量的孔隙，大大地增加了与空气的接触面积，使得其在空气中的燃烧较为猛烈，燃烧温度迅速上升。其燃烧过程属于固体燃烧的范畴，较为复杂。以镁为例，通过建立燃烧模型，来研究多孔活性金属的光谱辐射特性。首先，建立氧气总消耗量与活性金属剩余质量的关系，研究氧气在活性金属孔隙内的扩散浓度关系，通过求解活性金属热平衡方程得到活性金属燃烧过程中温度与时间的关系式，进而得到活性金属的峰值光谱辐射强度表达式；然后，将模型计算的仿真结果与红外热像仪测得的实验结果对比，结果表明，模型的计算结果与实验结果相一致，误差在了10%以内；最后，通过建立的燃烧模型来研究活性金属燃烧规律以及其光谱辐射特性，解决了高空、高速下的活性金属光谱辐射强度难以实验获得的问题，大大减小了实验成本与时间。分别对比不同时间活性金属箔片在1～3，3～5以及8～12 μm波段下的辐射强度，得出活性金属燃烧时的辐射强度主要集中在3～5 μm波段的结论。研究结果表明：自燃金属最大燃烧温度随高度的增加逐渐下降，随气流速度的增加先增加后减小，在速度为30 m·s-1时，温度达到最大；自燃金属的光谱辐射强度在2～6 μm波段达到最大。该模型也可以用来研究其他活性金属的燃烧特性。     

Dynamic Mechanical Properties of Activated Carbon–Filled Epoxy Nanocomposites

Nano-activated carbons obtained from oil palm empty fiber bunch (AC-EFB), bamboo stem (AC-BS), and coconut shells (AC-CNS) were reinforced in epoxy matrix to fabricate epoxy nanocomposites. The dynamic mechanical analysis of epoxy nanocomposites was carried out, and 5% AC-CNS treated with KOH-filled epoxy composites displayed the highest storage modulus of all the activated carbon–filled epoxy composites. The incorporation of a small amount of AC-BS, AC-EFB, and AC-CNS to the epoxy matrix enhanced the damping characteristics of the epoxy nanocomposites. The 5% AC-EFB treated with H₃PO₄ filled epoxy composites showed the highest glass transition temperature (T_g) in all temperature ranges.     

Removal of Cyanide from Aqueous Solutions by Adsorption on Activated Carbon Prepared from Lignocellulosic By-products

Cyanide is considered one of the most dangerous compounds for the environment. They are discharged by various industries: chemical and metallurgical processes (extraction of gold and silver) and food industries. Adsorption is among the most used processes for elimination of cyanides particularly for the low concentrations. In this work, the cyanide removal is carried out by adsorption onto activated carbons prepared from olive stones and coffee ground. So we can promote this by-product as an inexpensive adsorbent. The prepared activated carbons are characterized by scanning electron micrograph and by determination of the physicochemical properties and specific surface area. All the adsorption experiments were performed in batch mode on synthetic water cyanide (KCN) at pH 10.8–11.0 to avoid volatilization of very toxic HCN. To describe the adsorption kinetics, the kinetic models of pseudo-first-order, pseudo-second-order, and intra-particle diffusion were applied. The experimental equilibrium data for adsorption of free cyanide were analyzed by the Langmuir, Freundlich, and Temkin isotherm models.     

Fractal Aperture Distribution of Activated Carbon Fiber and Adsorption Behavior to Low‐Density Benzene Steam

Based on the J(x) fractal distribution function of aperture given by Jaroniec, this article suggests another function K(x), a variant of J(x) but offering new insight. We then use these two functions to characterize three kinds of activated carbon fiber (ACF) of different specific areas. This article also provides the fractal distribution of the aperture and the isotherm of nonpolarity benzene steam on the ACF specimens and the relationship between them.     

Adsorption of Cd(II) Ions onto Activated Carbon Prepared from Hazelnut Husks

In this study, a batch adsorption of Cd(II) ions onto activated carbon (AC) produced from hazelnut husks were investigated. The factors controlling the adsorption process such as initial pH, agitation time, dosage and initial concentration have been examined. The AC was showed a high affinity to Cd(II) ions at pH values between 5.0 and 7.0. The equilibrium time was found to be 300 minutes. Cd(II) adsorption equilibrium was analyzed with both Langmuir and Freundlich isotherm equations and it was found that Langmuir equations fitted well with the experimental data. Maximum Cd(II) adsorption capacity of AC was calculated to be 20.9 mg g^?1. Cd(II) adsorption kinetics described well with the pseudo second order model. The activated carbon prepared from hazelnut husks is efficient sorbent material for the removal of Cd(II) ions from aqueous solutions.     

电化学石英晶体微天平研究高氯酸钠水溶液中活性炭电极的离子存储行为

以电化学石英晶体微天平(EQCM)为主要测试手段,在不同浓度的高氯酸钠(NaClO4)水溶液中研究了水合离子吸附到活性炭电极孔隙过程中电极的质量变化.对于每种电解液,根据Raman光谱和EQCM数据分别计算了本体溶液中和电极/溶液界面上Na+的水合数.通过比对这两组Na+水合数,探讨了Na+存储到活性炭负极过程中的去溶剂化效应.     

催化臭氧氧化降解邻苯二甲酸二甲酯中催化剂构效关系

采用传统焙烧和微波辐射制备了不同活性炭 (AC) 负载 Ru 催化剂, 并用于催化臭氧氧化降解邻苯二甲酸二甲酯 (DMP) 反应中, 探讨了催化剂的构效关系. 结果表明, 所有 AC 和催化剂均能提高臭氧氧化 DMP 过程中 TOC (总有机碳) 去除率, 其活性顺序为 Ru/coal-AC > nutshell-AC > Ru/nutshell-AC > Ru/coconut-AC ≈ coal-AC > coconut-AC. 负载的 Ru 颗粒扩散到 AC 大孔中, 增加了反应的传质阻力, 使得反应物与 AC 内表面的活性位和金属 Ru 的接触机会减少, 这是 Ru/nutshell-AC 和 Ru/coconut-AC 活性低于 Ru/coal-AC 的一个原因; 催化剂表面 Ru 分散度也是导致其活性差别的原因之一. 微波加热引起 nutshell-AC 表面活性官能团发生变化, 从而导致其负载的 Ru 催化活性降低. 相对于传统焙烧, 微波辐射热处理能够提高 coal-AC 表面 Ru 的分散度, 从而提高催化剂活性.     

Synthesis of the Aliphatic Subunit of the Macrolide LL‐Z 1640‐2 via Vasella Ring Opening of a 6‐Iodo‐4‐deoxy‐D‐mannose

The synthesis of the aliphatic subunit 9 of the macrolide LL‐Z1640‐2 (I), starting from a 4‐deoxy‐D‐mannose derivative 2a, is described. The procedure includes the first successful application of a Vasella ring opening reaction for a 4‐deoxypyranoside. Nucleophilic addition of an alkynyllithium reagent to the aldehyde 4 led to the propargylic alcohol 7, which was converted to the advanced building block 9 in two further steps.