Synthesis, crystal structure and properties of the Cu complex of a tetradentate imidazole-functionalized diazamesocyclic ligand, 1,4-bis(N-1-methylimidazol-2-yl-methyl)-1,4-diazacycloheptane

A new potential tetradentate ligand, 1,4-bis(N-1-methylimidazol-2-ylmethyl)-1,4-diazacycloheptane (l), together with its Cu^II complex [CulCl]ClO₄ (1), has been reported. The crystal structure of 1, determined by single-crystal X-ray analysis, shows that it is in chiral P2₁2₁2₁ space group. The Cu^II centre is penta-coordinated in square pyramidal geometry and the diazacycloheptane (DACH) ring adopts normal boat configuration. The most striking feature of this complex is the formation of a 3D network bridged through the C-H?Cl hydrogen bonds with the perchlorate anions in the cavities, and stabilized via π-π stacking interactions along the a-direction. The solution behaviour of 1 has been further investigated by UV/Vis and ESR techniques.     

第一性原理计算钛酸铅A位掺杂对其负热膨胀性的影响

近年来,实验发现钛酸铅基材料具有负热膨胀性,且其热膨胀程度会受到掺杂元素的影响. 目前所研究的A位掺杂体系中,仅Cd原子掺杂能使钛酸铅负热膨胀性增强. 所以研究A位掺杂钛酸铅,比较Cd原子与其他原子在掺杂钛酸铅时化学键的异同,有助于深刻理解钛酸铅负热膨胀的本质. 本文利用第一性原理,分别优化了Sr、Ba、Cd掺杂钛酸铅的晶格常数,计算了它们的态密度和电荷密度. 结果表明Cd―O键的共价性强于Pb―O键,而Ba―O键和Sr―O键几乎呈离子性,Ba/Sr对Pb的替代削弱了化合物的共价性,降低了自发极化强度. 与实验测量的热膨胀系数对比可以发现,A位原子与氧原子之间的共价性增强,化合物负热膨胀程度升高;若A位原子与氧原子之间的共价性削弱,负热膨胀程度降低. 可见A位原子与氧原子之间的共价性影响了钛酸铅基化合物负热膨胀性.     

The use of trans-2,3-divinyl epoxides as precursors to carbonyl ylides

trans-2,3-Divinyl epoxides have been found to be good substrates for the generation of carbonyl ylides in CCl₄ and 145 °C. These ylides, to a limited extent, undergo isomerization to cis-2,3-divinyl epoxides, leading to the isolation of 4,5-dihydrooxepins. Of greater potential usefulness is the finding that these ylides can be efficiently trapped in an intermolecular sense by a dipolarophile, leading to dihydrofurans.     

Synthesis of [13]-membered macrocyclic stevastelins via a transesterification reaction as the key step: total synthesis of stevastelin C3

A new synthesis of stevastelin C3 (3), a [13]-membered ring component of the stevastelin family, whose structure was recently revised, is reported. Initially, a macrolactonization approach was attempted to generate the [13]-membered macrolactone but this met with failure, so a translactonization reaction was tried to obtain the targeted stevastelin C3 (3) from the corresponding [15]-membered ring counterpart. Unfortunately, this strategy did not prove successful, and, consequently, we opted to undertake a transesterification reaction from 23, as a means to accommodate the requisite aminoacid moiety at the correct position, to obtain 24. From 24, and through intermediates 25-28, the acyclic precursor of the [13]-membered ring macrolactone, compound 30, was efficiently prepared. By utilizing the synthetic course developed by Chida, we took 30 forward and completed the total synthesis of stevastelin C3 (3).     

Synthesis of 1-Bromo-3-methoxy-4-propoxy-5-iodobenzene——A Novel Efficient Process for the Synthesis of Brominated Aromatic Compound

The reaction of aromatic carboxylic acid with oxalyl chloride gives rise to the corresponding acid chloride which without purification is treated with the sodium salt of mercaptopyridine oxide in the presence of 2,2-azo-bisisobutyronitrile (AIBN), radical initiator to give a brominated aromatic compound. After etherification and oxidation, 5-iodovaniline was converted to trisubstituted benzene carboxylic acid which give 1-bromo-3-methoxy-4-propoxy-5-iodobenzene by this new brominating process with a yield of 74%.     

Structure-Activity Relationship of Insecticidal Steroids. V. 3β-Benzoyloxystigmastan-6-ones

The toxicity of steroid benzoates 4-10 for Colorado beetle (Leptinotarsa decemlineata Say.) larvae was studied by a contact-intestinal method. The most active growth and development regulator for this insect is 3-benzoyloxy-5-hydroxy-⁷-6-ketosteroid 9a.     

手性高效液相色谱法测定1—（6‘—甲氧基萘）乙醇不对称氢酯基化反应

在自制的硅基纤维素－三（３，５－二甲基苯基氨基甲酸酯）高效液相色谱手性固定相上（ＨＰＬＣ－ＣＳＰ），优化了１－（６＇－甲氧基萘）乙醇氢酯基化反应产物－萘普生甲酯手性分离的条件，测定了相应的一系列不对称氢酯基化反应产物的对映体过剩值（ｅ．ｅ．值）。结果表明，在ＣＤＭＰＣ－ＣＳＰ手性柱上用ＨＰＬＣ测定此类不对称催化反应的光学产率，评价催化剂体系的手性选择是一种非常理想的方法。     

Spectrophotometric estimation of ketotifen fumarate in pharmaceutical formulations

Four simple and sensitive spectrophotometric methods (A–D) for the determination of Ketotifen fumarate in bulk samples and pharmaceutical formulations are described. They are based on the formation of coloured species by the coupling of the diazotised sulphanilamide with the drug (method A, _max 520 nm) or by oxidizing it with excessN-bromo-succinimide and determining the consumed NBS with decrease in colour intensity of celestine blue (method B: _max 540 nm) or by the reduction of Folin-Ciocalteau reagent (method C: _max 720 nm) or by the formation of a chloroform-soluble, coloured ionassociation complex between the drug and Azocarmine G at pH 1.5 (method D: _max 540 nm). Regression analysis of Beer-Lambert plots showed good correlations in the concentration ranges 1–10, 2–12, 4–28 and 2.5–25 g/ml for methods A–D, respectively. The validity of the proposed methods was tested by analysing pharmaceutical formulations containing KTF: the relative standard deviations were within ±1.0%. Recoveries were 98.9–100.2%.     

SAPO—11分子筛用i—Pr2NH导向合成及其酸性研究

以ＡｌＰＯ４、Ｈ３ＰＯ４、ＳｉＯ２等为原料采用单一模板剂ｉＰｒ２ＮＨ合成了ＳＡＰＯ１１分子筛，利用Ａｖｒａｍｉ方程等对合成过程进行了定量描述。还利用红外（ＩＲ）、程序升温脱附（ＴＰＤ）、线性丁烯骨架异构反应催化活性测试等手段表征了ＳＡＰＯ１１的酸性。结果表明，合成过程随温度有明显变化，晶化阶段的活化能远高于核化阶段的值。可用Ａｖｒａｍｉ方程的参数来表征合成过程的难易程度。分子筛中存在Ｂ酸和Ｌ酸位，主要在中等强度范围，从而对线性丁烯骨架异构反应有较好的催化活性。提高分子筛中硅含量可明显增大酸位浓度，酸强度也有轻度增强。     

Pt-Sn脱氢催化剂浸渍状态的Sn-119和Pt-195的多核NMR研究

测定了Ｐｔ－Ｓｎ型催化剂浸渍状态下的Ｓｎ－１１９、Ｐｔ－１９５的多核核磁共振。当ＳｎＣｌ２／ＤＣｌ溶液体系中加入Ｈ２ＰｔＣｌ６以后，出现了Ｓｎ（Ⅳ）和另外一种Ｓｎ（Ⅱ）的构型，Ｓｎ－１１９峰向高场位移，说明部分Ｓｎ（Ⅱ）被氧化成Ｓｎ（Ⅳ），Ｈ２ＰｔＣｌ６的量对这种氧化性影响较小。而Ｈ２ＰｔＣｌ６／Ｄ２Ｏ溶液体系中加入ＳｎＣｌ２以后部分Ｐｔ（Ⅳ）被还原成Ｐｔ（Ⅱ），随着ＳｎＣｌ２量的增加，Ｐｔ（Ⅱ）